Panasonic Digital Hd Video Cassette Recorder Ajhd1500p Operating Instructions

– 51 –
MULTI CUE function
Operation for automatically moving to the next page and continuing
with registration when the cue point registration page has become full
(PAGE MODE = AUTO)
•When the page on which the cue points are being registered has become full, operation automatically
moves to the next page, and registration is continued.  When CUE98 on the last page is reached,
operation is automatically ended.*
When the next cue point is to be registered, the registration pointer must be moved.
Check...

– 52 –
MULTI CUE function
When registering cue points using numbers
While holding down the ADJ button Y among the time code buttons on the front panel, press the
SHIFT button Y to establish the cue point registration mode.  After setting the duration to be registered
on the bottom panel using the SHIFT button and ADJ button (same operation as the TCG registration
operation), the setting can be registered by pressing the SET button T.
Deleting registered points
Deleting all the points
•By pressing the...

– 53 –
IC CARD function
IC CARD mode selection
In  status with MODE/SEL button g pressed, IC CARD mode can be
selected.
When EXIT button h  is pressed, the mode changes from IC CARD to normal mode.
Outline
The management of the setup menu using IC CARD, and system file and user file (USER1~USER5)
loading (reading from IC card)/saving (storing into IC card) can be performed.

The system file and user file (USER2-USER5) are provided with a lock mode to protect the settings.
The system file can be set by...

– 54 –
IC CARD function
Description of Display
When IC CARD function is selected, the following information will be displayed at the VTR status
display 3.
1Mode display:It indicates that the unit is operating in IC CARD mode.
2 File select display:All the relevant file names are displayed, and when an intended file is
selected, the file name will be displayed blinking.  (In a state of default, 1
blinks, showing that USER1 is to be operated.)
3Battery display:It indicates the state of exhaustion of the...

– 55 –
IC CARD function
Description of Operation
The following key operation is possible with respect to IC CARD function.
File selection
With TRIM button pressed, the file selected changes as follows:

Do not take out the IC card during operation on IC card.  It may otherwise cause damage to the content
of the IC card.
Warning Message
When IC CARD mode is selected, the following warning message is sometimes displayed at the VTR
status display 3.
In that case, cancel the warning according to the...

– 56 –
Variable memory function
Variable memory function
Variable memory mode selection
In  status with MODE/SEL button g pressed, variable mode can be
selected.
When EXIT button h is pressed, variable mode is canceled and changed to normal mode.
Outline
The unit is provided with two variable memory functions as follows.  These functions can be used in
variable memory mode.
•Variable memory playback:The tape is played back in VAR mode within a specific range, and the
change in speed is stored in the...

– 57 –
Variable memory function
Variable memory editing operation procedure
Variable memory editing operation can be performed according to the following procedure, setting the
unit connected as a recorder to variable memory mode.
1Select the edit mode by pressing ASMBL button V or desired INSERT button W.
2Select VTR to be operated by pressing RECORDER or PLAYER button E.
3Register IN/OUT point by using SET button T and IN/OUT button T.
The OUT point of PLAYER cannot be registered.
4After selecting VTR...

– 58 –
ERROR LOG function
ERROR LOG mode selection
In  status with MODE/SEL button g pressed, ERROR LOG mode can be
selected.
When EXIT button h is pressed, ERROR LOG mode is canceled and changed to normal mode.
Outline
In case the following warning message is given during tape running, the time code and operation mode
as well as the warning message will be stored, which can be read in the form of a list at VTR status
display 3.
It is possible to store up to 99 warnings.  Also, in case of more than 99...

– 59 –
ERROR LOG function
Description of Display
When ERROR LOG function is selected, the following information will be displayed at the VTR status
display 3.
1 Warning display:Warning message stored is displayed.
2 Warning store status display:Store No. of warnings displayed and the number of all warnings
are displayed.
3 Operation mode display:Operation mode with warning stored is displayed.
4 Time code display:Time code with warning stored is displayed.
Description of Operations
The following key...

– 60 –
Setup (default settings)
The unit’s major settings are performed by making selections on menus.
The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3
connector in the unit’s connector area are hooked up.
Changing the settings
1Press the MENU button.
The setup menu appears on the TV monitor and setup menu No. appears on the counter display. (If
the setup has already been performed, the screen showing the changes made last will appear.)
2Rotate the search dial and select the...