Panasonic Digital Imaging Systems Dp 2310 Copier Adn Scaner Operating Instructions

							11
Getting To Know
Your Machine
Reduction/ Enlargement only
(See page 24) Select desired settings
Number of Copies
(Max. 999)
Adjust the Manual Exposure
                     or
Select type of Original(s)
Mainly TextText and Photo
combinedMainly Photo
Receiving Tray (Lower) Receiving Tray (Upper)
Tray/1-Bin Finisher (External)
• INNER 2 and OUTER are only available when the optional Inner Tray
or Exit Tray/1-Bin Finisher is installed.
Copy Jobs
(See pages 22-29) (See pages 30-35) (See pages 36 and 37)
(See pages 38-43) (See pages 44-47) (See pages 46 and 47)
■ Problem Solving
Adding Paper
(See page 10)
Replacing Toner Bottle
(See page 12)
Replacing Toner Waste
Container
(See page 12)Replacing Staple
Cartridge
(See page 12)
●When the optional
1-Bin Finisher (DA-
F300) is installed. Removing a Misfed Paper
(See pages 14-17)
User Error Code
(See page 12)
Machine Error Code
(Call your Service provider) Select the Exit Destination
COPY
SIZE
UXX
EXX
345 
						

							12
Getting To Know Your Machine
Operation Chart
■ Problem Solving
● Replacing the Staple Cartridge (When optional 1-Bin Finisher is installed.)
● Replacing Toner Bottle/Replacing Toner Waste Container
● User Error Codes (U Code)
Replace Toner Bottle
Replace Toner Waste
Container
Toner Waste Container
Shake the new Toner 
Bottle well to loosen the contents.Seal
Toner Bottle
(New)
Check the
operation
U1
U4U6
U7
U13
U14
U15
U16
U25 
U12
U11
U20/U21/U22
U0
U90
U8
Code Check Points
U0 Contact your Key Operator.
• Key Counter is not installed.
• Department ID Code is not entered.
U1 Front Cover is open.
U41-Bin Finisher is separated from the machine.
U6 Right Cover is open.
U7 Feeder Cover 1/2/3 is open.
U8 Transport Cover is open.
or
12
67
12
678
Add Staples 
						

							13
Getting To Know
Your Machine
Bottles Green Knob
New Toner Bottle 
Toner Bottle
Bottles Green Knob
Toner Bottle(Empty)
New Toner Waste Container
(New)
Staple Case
New
1
2
Empty
1
2
3
Jammed
Staple
Staple Cartridge
FQ-SS32
When the Staple is jammed
●The following message will
be displayed on the Touch
Panel Display:
Can Not Complete
Confirm Staple Unit
Code Check Points
U11 Paper remains in the Finisher Bin.
U12 Finisher Staple Cover/Top Cover is open.
U13 Low Toner.
U14 Toner Waste Container is full.
U15 Toner Waste Container is not installed.
U16 Call your Service provider.
U18 Total Copy Count reached the limit, consult your
Key Operator.
Code Check Points
U20 ADF Cover is open.
U21 ADF is opened while scanning from ADF.
U22 ADF Exit Unit is open.
U25 Shake Toner Bottle well.
U90 Battery requires replacement.
(See page 72)
45
6
8910
345
6
Replace the Toner Waste Container
along with the New Toner Bottle.
3
Toner Waste  Container
Cap 
						

							14
Getting To Know Your Machine
Operation Chart
■ Problem Solving (Continued)
● Removing a Misfed Paper (Paper Entry Area/1st Paper Tray)
● Removing a Misfed Paper (Paper Transport Area)
● Removing a Misfed Paper (Automatic Duplex Unit)
● Removing a Misfed Paper (2nd/3rd/4th Paper Tray)
Options
3rd Paper Tray (DA-DS303)
4th Paper Tray (DA-DS304)
When the optional Tray/1-Bin
Finisher is installed.
Right Cover
Misfed Paper
Right Cover
12Push
Latch
Misfed Paper
Right Cover
Paper Feed Guide
1
2
Feed Cover
1
2
Paper Tray
12
6
12
12
12 
						

							15
Getting To Know
Your Machine
Misfed Paper
1
2
∗ Confirm that the latch is securely fastened.
Heat Roller Cover
Right Paper Clearing Knob
1
3
2
1
2
Paper Tray
Misfed Paper
Latch∗
Transport Cover
Feed Cover
345
34
3
34
6
Right Cover
4 
						

							16
Getting To Know Your Machine
Operation Chart
■ Problem Solving (Continued)
● Removing a Misfed Paper (ADF)
● Removing a Misfed Paper (1-Bin Finisher)
ADF CoverMisfed Paper
Exit UnitADF Tray
Finisher
Release ButtonMisfed Paper
12
67
12
Option (DA-FS300) 
						

							17
Getting To Know
Your Machine
ADF TrayExit Unit
Misfed Paper
1
2
Misfed Paper
Remaining
Copies
Upper Cover
1
Misfed Paper
32
FinisherNOTE:
If the misfeed indicator(s) do not clear,
open the upper cover and remove all
misfed paper.
When using the Staple Sort, Shift-Sort
or Shift-Group mode,  remove the
remaining copies on the staple tray.
Then the copy job will restart.
345
6
8
3
9 
						

							18
Before Starting
As an ENERGY STA R® Partner, Panasonic has determined that this product meets
the 
ENERGY STA R® guidelines for energy efficiency.
This voluntary program specifies certain energy consumption and usage standards.
This product will automatically “power down” after a specified period of non-use. The
use of this 
ENERGY STA R® compliant product will reduce energy consumption and
ultimately benefit the environment.
The default functions can be adjusted depending on your office requirements.
Please ask your authorized Panasonic dealer for more details.
Energy Star 
						

							19
Before Starting
1234567
1089
Contents
COPY Key
● To use the unit as a photocopier.
ENERGY SAVER Key
● Saves power while the copier is not in use.
INTERRUPT Key
● Interrupts other copy or print jobs while making copies.
FUNCTION Key
● Use when changing the paper size, initial function values (default values) and key operator settings.
RESET Key
● Resets all features to the initial power-on state.
CLEAR Key
● Clears the copy count in the display.
STOP Key
● Stops the copy run.
ALARM LED (RED)
● Lights when trouble occurs.∗∗
ACTIVE LED (GREEN)
● Lights when machine is active.
PRINT DATA LED (GREEN)
● Lights when receiving print data.
ORIGINAL
SIZE KeysCOPY SIZE
KeysTouch Panel
DisplayKeypad START
Key
∗∗When the machine detects a problem or an alarm status is activated, the  8  Alarm LED lights
or begins to flash.
LED Lights: Machine detected a trouble status
  •  No paper in the selected tray or toner has run out.
  •  Machine detected trouble, such as paper misfed or jammed.
LED Flashes: Machine detected an alarm status
  •  No paper in the Tray. (Tray not selected)
  •  Toner is getting low, etc.
●The Control Panel displayed above shows only copier functions. Please refer to the appropri-
ate operating instructions for other control panel functions.
∗Fax/Email ON LINE LED for optional Fax/Internet Fax functions
Print ON LINE LED for Printer function
No.
1
2
3
4
5
6
7
8
9
10
NOTE
Control Panel 
						

							20
Before Starting
Touch Panel Display
12345910
222423
12
15
16
20
21
17
18
28
27
26
25
29
13
14
118
67
19
NOTE●Use only soft finger pressure to activate the Touch Panel Display. DO NOT USE SHARP
OBJECTS such as pens, fingernails etc., as this may damage the panel.
●Touch Panel Display Brightness Adjustment:
To adjust the brightness of the Touch Panel display, press and while holding down the  C
(CLEAR) key, keep pressing the  ORIGINAL SIZE/LEDGER or the  COPY SIZE/LEDGER
keys until the desired brightness is achieved.
ORIGINAL SIZE/LEDGER : Dimmer
COPY SIZE/LEDGER        : BrighterJob Status Indicator
Ex.: Copying 3 sets.
The Indicator displays the progress of a job task as follows:
0/3 → 1/3 → 2/3 → 3/3