Panasonic Digital Imaging Systems For Copy And Function Parameters Dp 8060 Operating Instructions

							
71
Function Parameters
5
Set the desired Function
Parameter(s).
When selecting the Key
Operator Mode:
Password
(8 digits: alpha-numerical;
alphabet (case-sensitive),
numbers, symbols
(@, ., _, and SPACE))
Set the desired Function
Set the desired Function
Parameter(s).
46
546 
						

							
72
Function Parameters
■
■ ■
■
■  General Settings
Screen
No.
00 Power On Default Mode Selects mode. COPY
●COPY, PRINTER, SCANNER, FAX ∗
01 Manual Add Toner Adds toner manually. Off
● Off, On
02 Sort Memory Status Indicates the sorting memory status. Off
● Off, On
03 Departmental Counter Indicates the department counter. Consult with an authorized service
provider
04 Data Security Kit Info. Indicates the Data Security Kit version and Security setting of the machine, when the
Security Kit is installed.
09 Key Operator Mode Input the Key Operator Password.
Modes Function Initial
Setting
01/02
02/02
∗When the optional Fax Communication Board is installed.NOTE 
						

							
73
Function Parameters
■
■ ■
■
■  Copier Settings
Screen
No.
00 Margin Value Default Selects the margin shift value. 10 mm
●5 mm, 10 mm, 15 mm, 20 mm
01 Edge Value Default Selects the edge width. 5 mm
● 5 mm, 10 mm, 15 mm, 20 mm
02 Book Value Default Selects the book void width. 20 mm
● 15 mm, 20 mm, 25 mm, 30 mm
03 Margin Reduction Def. Selects the reduction ratio in margin mode. No
● No, Yes
04 2-Sided Mode Default Function sets the duplex priority mode. No
● No, 1 to 2, 2 to 2, B to 2 (B: Book)
05 Reduce N in 1 For Space Selects whether to disable edge deletion. No
● No, Yes
06 Digital Skyshot Mode Enables or disables the use of Skyshot mode. Freeshp
● No, Freeshp (Freeshape), Parallel
07 Manual Skyshot Mode Enables or disables the use of Manual Skyshot. Off
● Off / M1, On / M2, On / M1, M2, On
08 Auto Contrast Adjust Automatically adjusts the copy density for text Yes and photographic originals.
●No, Yes
09 N in 1 Default Mode Selects the N in 1 default mode. 2 in 1
● 2 in 1, 4 in 1, 6 in 1
11 Booklet Default Mag. Selects the booklet magnification. Reduce
● 100 %, Reduce
12 Sort Mode Def. ADF Copy Selects the sort mode. Sort ●Non-Sort, Sort, Stplsort (Staple-Sort),
Sftgroup (Shift-Group)
13 Sort Mode Def. FB Copy ∗
Selects the sort mode. Non-Sort
●Non-Sort, Sort, Stplsort (Staple-Sort),
Sftgroup (Shift-Group)
14 Staple Position Setting Selects the staple position. Portrait
● Landscap (Landscape), Portrait, Center
15 Stamping Default Mode Selects the stamping mode. Page
● Page, Date, Issue
16 Page Numbering Style Selects the page numbering style. -n-
● -n-, n/m
17 Hole Punch Default Enables the hole punch mode. Off
● Off, On
18 Img. Repeat Dotted Line Selects the dotted line. Print
● None, Print
19 Double Exposure Selects the double exposure. On
● Off, On
24 Key Operator Mode Input Key Operator Password. Modes Function
Initial
Setting
01/05
02/05
03/05
04/05
05/05
∗FB: PlatenNOTE 
						

							
74
Function Parameters
ScreenNo.
00 Original Mode Default Sets the original setting. T/P
●Text, T/P  (Text/Photo),  Photo
01 Compression Mode Def. Sets the default compression mode setting. MMR
● MH, MR, MMR, JBIG
02  Resolution  Default Sets the default resolution setting. 300dpi
●150dpi, 300dpi, 600dpi
03 Job Build And SADF Mode Sets the SADF mode setting. No
● No, Yes
04 Bind Edge 2-Side Orig. Sets the bind position, 2-Sided original setting. Long
● Long, Short
05 Add New Address Adds a new address. ∗
06 Edit Address Book Edits the address book. ∗
07 Delete Address Deletes an address.∗
08 Scanner Settings Print Prints scanner settings. Start
●
Stop, Start
09 XMF File Type Sets the default XMF File Type. PDF
● TIFF, PDF
Modes Function
Initial
Setting
01/02
02/02
■
■ ■
■
■  Scanner Settings
NOTE∗Address Book is not necessary to set in this function setting. Your PC can be registered with
Panasonic-DMS. 
						

							
75
Function Parameters
■
■ ■
■
■  Printer Settings
Screen
No.
00 Number Of Prints Sets the initial number of prints. 1
●1 ~ 999
01 Paper Size Sets the paper size setting. LETTER ●A3, B4, A4, B5, A5, LEDGER, LEGAL,
LETTER, INVOICE, 8 x 13, 8.5 x 13
02 Paper Tray Sets the Paper Tray setting. Auto ●Auto,  Bypass, Tray  1, Tray  2, Tray  3, Tray  4,
LCT
03 Print Direction Sets the print direction setting. Portrait
● Portrait, Landscap (Landscape)
04 Auto Tray Selection Sets the auto tray setting. On
● Off, On
05 2-Sided Print Sets the 2-sided print setting. Off
● Off, On
06 Bind Edge Sets the bind position. Long
● Long, Short
07 Resolution Sets the resolution setting. 600 x 600
● 1200 x 600, 600 x 600, 300 x 300
08 Font (PCL) Sets the PCL font. 0
● 0 ~ 99
09 Symbol Table (PCL) Sets PCL symbol table. 11
● 0 ~ 35
10 Pitch (PCL) Sets the PCL pitch. 10.00
● 0.44 - 99.99
11 Point Size (PCL) Sets PCL point size. 012.00
● 4.00 - 999.75
12 Lines/Page (PCL) Sets PCL lines/page. 60
● 5 - 123
13 Return Character (PCL) Sets PCL return character. CR
● CR, CR + LF
14 Mutual A4/LTR Converts A4 to Letter automatically. Off
● Off, On
15 Mailbox Memory Status Indicates the mailbox memory status.
16 Print Data Sets print data. Stop
● Stop, Start
19 Key Operator Mode Input the Key Operator Password.
Modes Function Initial
Setting
01/04
02/04
03/04
04/04
NOTE● Functions No. 08 to 13 are available when the optional Printer Controlle\
r Module (DA-PC800)
is installed. 
						

							
76
Function Parameters
For Key Operator
ScreenNo.
00 Paper Size Sets the paper size of each paper drawer. ∗
Consult with an
● Ledger, Legal, Letter, Letter-R, Invoice, A3, authorized service
B4, A4, A4-R, B5, B5-R, A5, 8 x 13, 8.5 x 13, dealer
AUTO ∗∗
01 Auto Reset Time Selects the Control Panel reset time. 1 min. ●None, 30 sec., 1 min., 2 min., 3 min.,
4 min.
02 Power Save Mode Timer Sets the Energy Saver mode and time. 15
● 1-240 minutes
03 Sleep/Shutdown Timer Sets the Sleep/Shutdown timer. 90 minutes ●None, 1-240  minutes (DP-8060/8045)
15 minutes
(DP-8035)
04  Language  Default Selects the message language of the display. English
●English, C.French, Spanish
05 Special Paper Tray 1 Sets the paper drawer for special paper None
( Ex. : coloured).
● None, Tray 1, Tray 2, Tray 3, Tray 4, LCT,
Bypass
06 Special Paper Tray 2 Sets the paper drawer for special paper None (Ex. : coloured).
● None, Tray 1, Tray 2, Tray 3, Tray 4, LCT,
Bypass
07 COPY Output Bin ∗∗∗
Sets the output bin. Upper
●Upper, Bottom
08 PRINTER Output Bin ∗∗∗
Sets the output bin. Bottom
●Upper, Bottom
09 FAX/EMAIL Output Bin ∗∗∗
Sets the output bin. Bottom
●Upper, Bottom
10 Auto Paper Out Rotate Copier will automatically rotate image and Off print when selected paper tray is empty.
●Off, On
11 TCH Panel Beep Sound Beep sounds when touching the panel. Soft
● Off, Soft, Loud
12 Original Set Beep Sound Beep sounds when original is set on the Platen. No
● No, Yes
13 Orig. Set In ADF Sound Beep sounds when original is set into the ADF. Yes
● No, Yes
14 Dept. Counter Mode Monitors copy usage of each department. Consult with an (1) Print usage of each department authorized service
(2) Print limit of each department dealer
(3) ID code of each department
Modes Function
Initial
Setting
01/13
02/13
03/13
NOTE● The Key Operator Password is required before any changes can be made to items on this
page.
∗Only 3 Paper Sizes (Letter, A4, B5) will be available when selecting Tray 1.
∗∗AUTO Paper Size can be selected for Tray 2.
∗∗∗Functions No. 07 to 09 are available when optional Finisher DA-FS600/FS6\
05 is installed.
■
■ ■
■
■  General Settings 
						

							
77
Function Parameters
■
■ ■
■
■  General Settings
Screen
No.
15 Fold Position (A3/LDR) ●-4.0 - +4.0 mm 0.0 mm
16 Fold Position (B4) ●-4.0 - +4.0 mm 0.0 mm
17 Fold Position (A4/LTR-R) ●-4.0 - +4.0 mm 0.0 mm
19 Language Sel. Priority Selects the display message language. Off
●Off, On
20 Date Time Setting Sets date time registered.
● Month, Day, Year, Time
21 Weekly Timer Sets the weekly On/Off timer. Off
22 DHCP Default Sets the DHCP. ∗
Ye s
●No, Yes
23 TCP/IP Address Sets user IP address. ∗
●
3 digits x 4
24 TCP/IP Subnet Mask Sets the subnet mask. ∗
●
3 digits x 4
25 TCP/IP Default Gateway Sets the gateway address. ∗
●
3 digits x 4
26 DNS Server Address Sets the DNS server. ∗
Ye s
●No, Yes
27 Hard Disk Initialize Selects the HDD format/deletion. Format (Stop) ●Format, Deletion

For Format : No, Yes
For Deletion: Stop, Medium, High
For Medium/High: No, Yes
When disk initialization is performed, the
completion time varies depending on the amount
of data accumulated on the hard disk.
The approximate Maximum time to initialize the
HDD, depends on the data Deletion security level
setting below:
Medium = 2  hours
High = 3 hours
28 Hard Disk Error Check Selects the hard disk error check.
●Stop, Start
Modes Function
Initial
Setting
04/13
06/13
NOTE● The Key Operator Password is required before any changes can be made to items on this
page.
∗When Functions No. 22 to 26 are set, cycle the power by turning the Power Switch on the
Left side of the machine OFF and ON.
05/13 
						

							
78
Function Parameters
For Key Operator
■
■ ■
■
■  General Settings
Screen
No.
30 Sleep/Shutdown Select Selects the  Sleep/Shutdown mode. Sleep
●Sleep, Shutdown
31  Print General Settings Print out the General Function parameters list.
● Stop, Start
32  Corona Wire Cleaning Sets the corona wire cleaning.
● Off, On
33  MAC Address Indicates the MAC address.
34  Address Book Group ID Inputs group ID for address book. ∗
0
●0 ~ 99
35  Tandem User Parameter Inputs parameter of user machine. ∗
36  Community Name (1) Selects to change the SNMP of Community
Name (1).∗
●
Enables read only.
37  Community Name (2) Selects to change the SNMP of Community Name (2).∗
●
Enables read/write.
38  Device Name Inputs the device name when necessary. ∗
(For Status Monitor/EtherTalk Machine Name)
39  Device Location Inputs the device location when necessary. ∗
(For Status Monitor)
40  Daylight Time Set the daylight time according to your local MAR 2nd regulations.∗∗∗
●
No, MAR 2nd, APR 1st
41  Routing Menu Function Selects  the  Document  Distribution  function. ∗∗
No
●No, Yes
42  Doc. Dist Server Name Inputs the Document Distribution System
routing server name. ∗∗
43    Doc  Dist  Server  IP Inputs  the  Document  Distribution  System 0.  0.  0.  0. routing server IP address.∗∗
●
3 digits x 4
45 Special Paper Tray 3 Sets the Paper Tray for special paper None (Ex. : colored).
●None, Tray 1, Tray 2, Tray 3, Tray 4, LCT, Bypass
46 Special Paper Tray 4 Sets the Paper Tray for special paper None
(Ex. : colored).
●None, Tray 1, Tray 2, Tray 3, Tray 4, LCT, Bypass
47 Special Paper Tray 5 Sets the Paper Tray for special paper None
(Ex. : colored).
●None, Tray 1, Tray 2, Tray 3, Tray 4, LCT, Bypass
Modes Function Initial
Setting
07/13
09/13 08/13
NOTE∗When Functions No. 34 to 39 are set, cycle the power by turning the Power Switch on the
Left side of the machine OFF and ON.
∗∗When the optional Document Distribution System (DA-WR10) is installed.\
∗∗∗MAR 2nd: From 2:00 AM 2nd Sunday of March to 2:00 AM 1st Sunday of November.
APR 1st: From 2:00 AM 1st Sunday of April to 2:00 AM Last Sunday October.
●
This setting is applied from March 2007. If you select “MAR 2nd” b\
efore March 2007, the
daylight time will automatically set to “APR 1st”.
10/13 
						

							
79
Function Parameters
NOTE●The Key Operator Password is required before any changes can be made to items on this page.
■
■ ■
■
■  General Settings
Screen
No. Modes Function Initial
Setting
48 Data Deletion Of HD Selects the deletion level of hard disk data in Basic every copy/scan/print job.
●Basic, Medium, High
Every copy/print job data is automatically
deleted after each job is completed.
Select one of the 3 available Data deletion
security levels (Basic, Medium and High).
For higher security select Medium and High, however,
the deletion time increases with the increase in
security level, and may take longer to erase the data.
49 Copy Bin Home Position Sets t he copy bin to return to its home position. Off
●Off, On
50 Key Operator  Password Input the Key Operator Password. 00000000
51 HD Drive Lock Settings Sets or releases the Drive Lock, or changes
the password for the Drive Lock.
●Set Drive Lock
● Change Password
●Release Drive Lock
55 User Authentication
Enables or disables the user authentication for eachOff
function. (copying, faxing, scanning, and printing)(For each function)
● Copy, Fax, Scanner, Printer
●Time Zone Depends on Country code.
56 Authentication Method* Selects t he authentication method to use by NTLM
the User Authentication function.
● Clear Text, NTLM
57 Administrator NameInputs the system administrator name and password.
58 ID Timeout* Selects the valid period of authentication. Auto Reset Time
●Auto Reset Time, After Every Job
59 Logon Attempts* Sets the permitted number of logon attempts. 0
● 0 ~ 9
60 Lockout Time* Sets the time period for the system lockout 5 when the permitted number of logon attempts
is exceeded during the user authentication.
●1 ~ 60
61 User Auth. Domain Sets the NetBIOS domain and DNS suffix to use for user authentication.
●00 ~ 09
10/13
13/13
■
■ ■
■
■  Copier Settings
Screen
No.
00 Paper Size Priority Selects paper size priority. LETTER ●LEDGER, LEGAL, LETTER, LETTER-R,
INVOICE, A3, B4, A4, A4-R, B5, B5-R, A5,
8 x 13, 8.5 x 13
01 Original Mode Default Selects original setting. T/P
● Text, T/P  (Text/Photo),  Photo
Modes Function
Initial
Setting
01/05 11/13
12/13
* No. 56, 58, 59, 60 are only available when No.55 setting is set to On. 
						

							
80
Function Parameters
For Key Operator
■
■ ■
■
■  Copier Settings
Screen
No.
02 Text  Contrast Selects  contrast  for Text  mode. 4
●1 ~ 7
03 T/P Contrast Selects contrast for Text/Photo mode. 4
● 1 ~ 7
04 Photo Contrast Selects contrast for Photo mode. 4
● 1 ~ 7
06 Interleaving Default Selects OHP interleaving paper. Blank
● Blank, Copy
07 Page Insertion Default Selects page insertion. Blank
● Blank, Copy
08 Cover Mode Default Selects cover paper. F, Blank ●F, Blank, F, Copy
FB, Blank, FB, Copy (F: Front, FB: Front + Back)
09 Job Build And SADF Mode Enables or disables the use of SADF function. Yes
●No, Yes
10 Maximum Copy Setting Determines whether to limit number of copies 0
(0-99). (No limit)
12 M1, Size Inputs a size in job memory 1 for frequently 70 x 160 mm used size. (X)    (Y)
●X: 5~432/Y: 5~297 mm
(See pages 62-63)
13 M2, Size
Inputs a size in job memory 2 for frequently used size.95 x 220 mm
● X: 5~432/Y: 5~297 mm (X)    (Y)
(See pages 62-63)
16 Memory Overflow Warning Selects the  task to perform when memory Print
overflow occurs.
● Print, Cancel
17  Toner Save Mode (T) Selects the toner save in Text mode. None
● None, Level 1, Level 2 ∗
18 Toner Save Mode (T/P) Selects the toner save in Photo/Text mode. None
● None, Level 1, Level 2 ∗
19 Toner Save Mode (P) Selects the toner save in Photo mode. None
● None, Level 1, Level 2 ∗
20 Add New Tandem Desti. Inputs a new destination to split the copy job.
21 Edit Tandem Destination Edits the split copy job destination.
22 Delete Tandem Desti. Deletes the split copy job destination.
23 Copier Settings Print Prints the copier settings.
● Stop, Start
Modes Function
Initial
Setting
04/05
05/05
NOTE● The Key Operator Password is required before any changes can be made to items on this page.
∗“Level 1 or 2” setting consumes less Toner than “None” setting, however, the copy quality will
diminish slightly.
Toner saving is based on the Panasonic 6 % density Test Chart (N910653):
Level 1: Uses approximately 10 % less Toner than None setting.
Level 2: Uses approximately 20 % less Toner than None setting.
03/05 01/05
02/05