Panasonic Digital Video Cassette Recorder AG DV2000P Operating Instructions

Press(STOP) on this unit to stop
editing.
To monitor the mixed signal after Audio
Mixing
Press STEREO SELECT during playback and select
STEREO2.
Notes:
Audio Mixing is not possible in the following cases:
When the tape in the recording VCR (this unit) is:
Recorded in 16bit audio mode;
Recorded in LP mode;
Blank, or contains a blank portion in the middle.
When INPUT SELECT is set to DV IN.
In order to ensure that the editing operation is performed
properly, the editing points should be set at least 20...

Manual Copying
This function can be used to copy tapes between digital video equipments with practically no deterioration in quality.
This function can also copy a tape that was recorded in S-VHS (VHS) format onto a digital video tape.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Operations
Press EDIT MENU.
On Screen Display
Check that  Copying is selected and
press OK.
Press PLAYER,  and then press  JOG/
SHUTTLE.
The picture from the playback unit appears on the
screen....

On Screen Display
Press RECORDER, and then press
JOG/SHUTTLE.
Notes:
The picture from the recording VCR appears on the
screen.
Search for the edit start point on the
recording VCR.
Select Start Copying.
Press OK.
Editing begins.
Press EDIT MENU to stop editing.
Operation now returns to the screen which appears
in step 3. This makes it possible to continue with
editing or change the point at which editing is to
start.
Press EXIT.
The On Screen Display disappears.
If a digital video tape is copied without...

Manual Insert
This function is used to replace the picture and sound on a recorded tape.
Preparations
Complete necessary connections and settings.See pages 24-33.
Example: Video Insert
Operations
Press EDIT MENU.
Select  Video Insert,  and then Press  OK.
To insert picture: Select Video Insert.
To insert sound: Select Audio Insert.
To insert picture and sound: Select AV Insert.
Press PLAYER  and JOG/SHUTTLE.
The picture from the playback unit appears on the
screen.
On Screen Display
Note:
Video Insert...

Search for the edit start point on the
playback unit.
Press RECORDER and JOG/
SHUTTLE.
The picture from the recording VCR appears on
the screen.
Search for the edit start point
on the recording VCR.
Select Start Insert.
Press OK.
Editing begins.
Press EDIT MENU to stop editing.
Operation now returns to the screen which
appears in step 3. This makes it possible to
continue with editing or change the point at which
editing is to start.
Press EXIT.
The On Screen Display disappears.
Notes:
AV Insert is not...

Manual Audio Dubbing
This function is used to add new sound on the STEREO2 track of previously recorded tape.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Operations
Press EDIT MENU.
On Screen Display
Select  Audio Dubbing,  and then Press
OK.
Press PLAYER  and JOG/SHUTTLE.
The picture from the playback unit appears on the
screen.
Search for the edit start point on the
playback unit.
46 

Press RECORDER and JOG/
SHUTTLE.
The picture from the recording VCR appears on the
screen.
Search for the edit start point on the
recording VCR.
Select Start Dubbing.
Press OK.
Editing begins.
Press EDIT MENU to stop editing.
Operation now returns to the screen which appears
in step 3. This makes it possible to continue with
editing or change the point at which editing is to
start.
Press EXIT.
The On Screen Display disappears.
To monitor the edited audio after Audio
Dubbing
Press STEREO SELECT during...

Program Assemble
This function can be used to link together desired scenes on a tape.
This function can also be used to skip unnecessary scenes recorded on a tape and copy them onto a separate tape.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Operations
Press EDIT MENU.
On Screen Display
Select  Program Editing,  and then
Press OK.
Select Assemble,  and then Press  OK.
Notes:
Program Editing can be performed using either the tape
counter or Time code display, but the Time...

Press PLAYER and JOG/SHUTTLE.
The picture from the playback unit appears on the
screen.
Search for the edit start point on the
playback unit and press MARK IN.
Search for the edit end point on the
playback unit and press MARK OUT.
(Continued on next page)
Notes:
Although Assemble editing can be pet-formed in LP mode,
Insert, Audio Dubbing, and Audio Mixing cannot be
pet-formed with a tape recorded in LP mode. It is necessary
to first copy the tape in SP mode.
In order to ensure that the editing operation...

Program Assemble (continued)
Press RECORDER  and JOG/
SHUTTLE.
The picture from the recording VCR appears on the
screen.
On Screen Display
Search for the edit start
point on the recording
VCR and press  MARK IN.
Press OK.
“OK: done” is not displayed at the bottom
of the screen.
To check and 
change programs:
Select  Confirm/Change  and then press OK.
To confirm, change, insert or erase editing programs,
see pages 60-61.
Programs cannot be inserted or erased through the
recording unit.
To continue setting...