Panasonic Disk Recorder Management Software Wv As65 Operating Instructions

Live image
SD memory recording/SD
memory data Alarm notification with
Panasonic Alarm Protocol
ND300
FTP Send by Alarm 
Alarm logThe WJ-ND300 or WJ-ND200 recorder sends a notification to the PC when an
alarm has occurred or an error has arisen.
The alarm information is added to the alarm log. The alarm images with a time
length preset by the Pre/Post time will be downloaded. (Alarm download) Error
information is added to the error log.
It is possible to update an alarm log by referring to information of...

12
Restrictions when operating MPEG-4 images
There are following restrictions when MPEG-4 images are used with this software.
1. When displaying live images
qBlack screen may be displayed for the first few seconds (
*) when the following operations are performed while
displaying live images.
•When MPEG-4 live images are displayed (by switching camera channel, etc.)
•When MPEG-4 image is enlarged
wIt may take several seconds (
*) for refresh interval of MPEG-4 image depending on the configuration of the...

13
yWhen playing MPEG-4 image by designating time and date, playback may start from a point several seconds
after the designated time and date or from the first frame of the next record.
uEven when the mouse pointer is moved onto the image display area (page 26), information supposed to be dis-
played as described on page 26 will not be displayed when displaying MPEG-4 live images.
3. When playing recorded images (Local mode)
qDisplayed playback time may be fast for several seconds (
*) when the...

14
6. When using the Panasonic alarm protocol function
Duration of images to be downloaded when Panasonic alarm protocol is received may not be exactly same as the
duration set for Duration-Pre and Duration-Post. Set Duration-Pre and Duration-Post longer than the refresh
interval set on the camera.
Important:
*: Time (seconds) and intervals differ depending on the refresh interval set on the camera (1 – 5 seconds). To
shorten time lag, set the refresh interval on the camera shorter. Refer to the...

15
Error Code
Installation / Uninstallation
Install this software to a PC
The settings information previously configured for the
use of a WV-AS60 can be reused for a WV-AS65.
Important:
•Avoid installing both WV-AS60 and WV-AS65 on a
PC. The software on the PC will not work. First
uninstall the WV-AS60, then install the WV-AS65.
•When reinstallation is necessary, uninstall the
existing software before starting the reinstallation.
An overwrite installation may cause unstable oper-
ations.
Step 1
Insert...

16
Uninstalling this software
Note:
The files downloaded from the recorder will not be
deleted.
Close the downloader before uninstalling. Refer to
Exit the downloader on page 113.
For Windows XP
Step 1
Open Add or Remove Programs in Control Panel.
Step 2
Select WV-AS65 (the program to be deleted) from
the presently installed programs and click the [Change/
Remove] button.
The uninstall program will be launched and the wizard
will be displayed.
Step 3
Uninstall the program by following the instructions...

17
Connecting with the Recorder
Connect the recorder with PC and perform the network settings. Refer to the operating instructions of the recorder in
use.
Performing the network settings
With the following network environment, it is not necessary to perform network settings.
Step 1
On the task bar, click Start and then click the Control
Panel.
The control panel will be displayed.
Important:
Log in to the PC as an administrator. 
Step 2
Click the Network and Internet Connections icon.
The Network and...

18
Step 3
Click Network Connections.
The Network Connections window will be displayed.
Step 4
Double click Local Area Connection.
The Local Area Connection Status window will be
displayed.
Step 5
Click the [Properties] button.
The Properties window of Local Area Connection
will be displayed.
Step 6
Click Internet Protocol (TCP/IP)and then click the
[Properties] button.
The Properties window of Internet Protocol
(TCP/IP) will be displayed.
Step 7
Click Use the following IP address and enter the IP
address...

19
Registration of the recorder
It is necessary to register the recorder to play or down-
load recorded images from the recorder. Refer to page
122 for descriptions of how to register the recorder.
Note:
It is necessary to perform the connection test to
complete the recorder registration. The connection
test checks whether the recorder is connected and
located in the registered IP address or the host
name. If the connection test fails, registration of the
recorder cannot be completed. 

20
Main Application
Start the main application (open the operation window)
Step 1
Select WV-AS65 from the Start menu (Start - All
Programs - Panasonic - Disk Recorder
Management Software - WV-AS65).
The login window will be displayed after the startup
splash image is displayed.
Step 2
Enter a user name and password.
When this software is installed, only the administrator
(ADMIN) is registered. When logging into the main
application just after the installation, enter ADMIN for
the user name and 12345 for...