Home > Panasonic > Projector > Panasonic DLP Based Projector PT CW230 Operating Instructions

Panasonic DLP Based Projector PT CW230 Operating Instructions

Here you can view all the pages of manual Panasonic DLP Based Projector PT CW230 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 41

ENGLISH - 41
Settings
Manual PC adjust
Select [PC adjust] from the Main Menu (see 
“Navigating through the menu” on page 35), 
then select the item from the sub-menu.
Remote ControlControl Panel
Some computers employ special signal formats 
which may not be tuned by Multi-scan system of this 
projector.  Manual PC adjustment enables you to 
precisely adjust several parameters to match those 
signal formats. The projector has 10 independent 
memory areas to store those parameters manually 
adjusted. It...

Page 42

Manual PC adjust
42 - ENGLISH
Settings
Current mode
Press ▲▼ to select [Current mode].1 ) 
Press ► or the  button 2 ) 
to enter the next submenu to show 
H-sync freq. and V-sync freq. of the 
connected computer.
Clamp
Press ▲▼ to select [Clamp].1 ) 
Press the  button to display 2 ) 
the adjustment dialog box.
Press ◄► to adjust the clamp level.3 ) 
When the image has dark bars, try this  z
adjustment.
Reset
To reset the adjusted data, all adjustments will return 
to their previous figures.
Press ▲▼ to...

Page 43

ENGLISH - 43
Settings
Image select 
Select [Image select] from the Main Menu (see 
“Navigating through the menu” on page 35), 
then select the item from the sub-menu.
Remote ControlControl Panel
Dynamic
For viewing pictures in a bright room.
Press ▲▼ to select [Dynamic] and then 
press the  button.
Standard
Normal picture mode preset on the projector.
Press ▲▼ to select [Standard] and then 
press the  button.
Real
Picture mode with improved halftone for graphics. 
Press ▲▼ to select [Real] and then press...

Page 44

44 - ENGLISH
Settings
Image adjust
Select [Image adjust] from the Main Menu (see 
“Navigating through the menu” on page 35), 
then select the item from the sub-menu.
Remote ControlControl Panel
Note
Make sure you selected [Store] after adjusting settings.  z
Some settings can not be stored if not registered with 
[Store] function.
Contrast
Press ▲▼ to select [Contrast].1 ) 
Press the  button to display 2 ) 
the adjustment dialog box.
Press ◄► to adjust the setting value.3 ) 
OperationAdjustmentAdjustment...

Page 45

Image adjust
ENGLISH - 45
Settings
Red 
Press ▲▼ to select [Red].1 ) 
Press the  button to display 2 ) 
the adjustment dialog box.
Press ◄► to adjust the setting value.3 ) 
OperationAdjustmentAdjustment 
range
Press ►.deepen red toneMaximum 
value 63
Press ◄.lighten red toneMinimum 
value 0
Green
Press ▲▼ to select [Green].1 ) 
Press the  button to display 2 ) 
the adjustment dialog box.
Press ◄► to adjust the setting value.3 ) 
OperationAdjustmentAdjustment 
range
Press ►.deepen green 
tone
Maximum...

Page 46

Image adjust
46 - ENGLISH
Settings
Progressive
Press ▲▼ to select [Progressive].1 ) 
Press the  button to display 2 ) 
the dialog box.
Press ◄► to select the desired item.3 ) 
An interlaced video signal can be displayed in  z
progressive mode. Select one of the following 
options.
OffDisabled
L 1For an active picture
L 2For a still picture
FilmFor watching a film
Note
When input video signal to the projector, [Progressive]  z
will become available.
[Progressive] cannot be selected when [480p],  z
[576p],...

Page 47

ENGLISH - 47
Settings
Screen 
Select [Screen] from the Main Menu (see 
“Navigating through the menu” on page 35), 
then select the item from the sub-menu.
Remote ControlControl Panel
Normal
Provide the image to fit the screen size while 
maintaining the aspect ratio of the input signal.
Press ▲▼ to select [Normal] and then 
press the  button.
Full 
Provide the full screen image.
Press ▲▼ to select [Full] and then press 
the  button.
Wide(16:9)
Provide the image at the 16:9 wide screen ratio.
Press ▲▼ to...

Page 48

48 - ENGLISH
Settings
Screen 
The following items are the 
submenu of [Store].
Custom adj.
Adjust the screen scale and position manually with 
this function.
Press ▲▼ to select [Custom adj.].1 ) 
Press ► or the  button to 2 ) 
enter the next submenu.
Press ▲▼ to choose the item you 3 ) 
want to adjust.
You can choose one from the items as below: z
Scale H/VAdjust the Horizontal/Vertical screen 
scale.
H&VWhen set to [On], the aspect ratio is 
fixed.
Position H/VAdjust the Horizontal/Vertical screen...

Page 49

ENGLISH - 49
Settings
Screen 
Ceiling
This function is used to project the image from a 
ceiling-mounted projector.
Press ▲▼ to select [Ceiling] and then 1 ) 
press the  button.
Press ▲▼ to change the image.2 ) 
When this function is set to [On], the picture will  z
be top/bottom and left/right reversed.
Rear
This function is used to project the image from rear of 
the screen.
Press ▲▼ to select [Rear] and then 1 ) 
press the  button.
Press ▲▼ to change the image.2 ) 
When this function is set to [On],...

Page 50

50 - ENGLISH
Settings
Sound
Select [Sound] from the Main Menu (see 
“Navigating through the menu” on page 35), 
then select the item from the sub-menu.
Remote ControlControl Panel
Volume
Press ▲▼ to select [Volume] and then 1 ) 
press the  button.
Press ◄► to adjust the volume.2 ) 
Press  button to set the volume. z
OperationAdjustmentAdjustment 
range
Press ►.turn up the 
volume
Maximum 
value 63
Press ◄.turn down the 
volume
Minimum 
value 0
You can also press  buttons on  z
the remote control or...

Start reading Panasonic DLP Based Projector PT CW230 Operating Instructions

Related Manuals for Panasonic DLP Based Projector PT CW230 Operating Instructions

All Panasonic manuals