Home
>
Panasonic
>
Projector
>
Panasonic DLP Based Projector PT-D5500U PT-D5500UL Operating Instructions
Panasonic DLP Based Projector PT-D5500U PT-D5500UL Operating Instructions
Here you can view all the pages of manual Panasonic DLP Based Projector PT-D5500U PT-D5500UL Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
51
Adjust clock page
Click [Network Setting], then [Adjust clock] to display the Adjust clock page.
Time zone selection Button to update time zone setting
Button to update time and date
settings
New date field
New time field
• If the time becomes incorrect immediately
after setting the correct time, then the
battery needs to be changed. Contact the
dealer where you bought the projector to
have the battery changed.Note
POP server setup page
Click [Network Setting], then [POP server set up] to display the...](http://img.usermanuals.tech/thumb/58/75761/w300_pt-d5500u_om_d-50.png "Page 51
51
Adjust clock page
Click [Network Setting], then [Adjust clock] to display the Adjust clock page.
Time zone selection Button to update time zone setting
Button to update time and date
settings
New date field
New time field
• If the time becomes incorrect immediately
after setting the correct time, then the
battery needs to be changed. Contact the
dealer where you bought the projector to
have the battery changed.Note
POP server setup page
Click [Network Setting], then [POP server set up] to display the...")
51 Adjust clock page Click [Network Setting], then [Adjust clock] to display the Adjust clock page. Time zone selection Button to update time zone setting Button to update time and date settings New date field New time field • If the time becomes incorrect immediately after setting the correct time, then the battery needs to be changed. Contact the dealer where you bought the projector to have the battery changed.Note POP server setup page Click [Network Setting], then [POP server set up] to display the...
Page 52
![Page 52
52
Using Web Browser Control
Password change page
Click [Change Password].
Old password input field
New password input field
New password input field
(re-enter for confirmation)
Button for executing password
change Button for erasing all
entered characters
Network status page
Click [Network Setting], then [Network status] to display the Network status page.
Network software version display
Set IP address display Set subnet mask display MAC address display
Network status display](http://img.usermanuals.tech/thumb/58/75761/w300_pt-d5500u_om_d-51.png "Page 52
52
Using Web Browser Control
Password change page
Click [Change Password].
Old password input field
New password input field
New password input field
(re-enter for confirmation)
Button for executing password
change Button for erasing all
entered characters
Network status page
Click [Network Setting], then [Network status] to display the Network status page.
Network software version display
Set IP address display Set subnet mask display MAC address display
Network status display")
52 Using Web Browser Control Password change page Click [Change Password]. Old password input field New password input field New password input field (re-enter for confirmation) Button for executing password change Button for erasing all entered characters Network status page Click [Network Setting], then [Network status] to display the Network status page. Network software version display Set IP address display Set subnet mask display MAC address display Network status display
Page 53
53 Before asking for service---Before asking for service, check the following points. SymptomsChecks • Is the power cord plug correctly plugged in? • Is the MAIN POWER turned on? • Is electricity running to the power outlet? • Is the temperature monitor (TEMP) indicator on the front of the unit flashing or turned on? (See page 41) • Is the lamp monitor (LAMP) indicator on the front of the unit flashing or turned on? (See page 41) • Is the lamp unit door installed correctly? • A wrong ID is set. (See...
Page 54
54 Specifications PT-D5500UPT-D5500UL Power supplyAC 120 V, 50 Hz/60 Hz Power consumption770 W (about 10 W in standby without fan running) DLPTMpanel Panel size Display system Number of pixels 0.7 inch (aspect ratio 4:3) DMDTMelement, DLP type 786 432 pixels (1 024 x 768 dots) Lens Powered zoom Powered focus control 1 to 1.36 F=1.7 to 2.0 f=25.6 to 33.8Option Projection lamp2 bulbs x 300 W UHM lamp Optical output5 000 lm1 Applicable scanning frequency For video signal (S-video included) For RGB signal...
Page 55
![Page 55
55
Interface ports
RGB2 input terminal
Video input/output terminal
S-video input terminal
Serial input/output terminal
Remote1 input/output terminal
Remote2 terminal
DVI-D terminal
LAN terminal
1 set of high-density, D-sub 15p (female)
[For YP
BPRinput]
Y: 1.0 V [p-p] synchronization signal included,
P
BPR: 0.7 V[p-p] 75 Ω
[For RGB input] 0.7 V[p-p] 75 ΩFor G-SYNC: 1.0 V[p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD:
TTL, high-impedance, positive/negative...](http://img.usermanuals.tech/thumb/58/75761/w300_pt-d5500u_om_d-54.png "Page 55
55
Interface ports
RGB2 input terminal
Video input/output terminal
S-video input terminal
Serial input/output terminal
Remote1 input/output terminal
Remote2 terminal
DVI-D terminal
LAN terminal
1 set of high-density, D-sub 15p (female)
[For YP
BPRinput]
Y: 1.0 V [p-p] synchronization signal included,
P
BPR: 0.7 V[p-p] 75 Ω
[For RGB input] 0.7 V[p-p] 75 ΩFor G-SYNC: 1.0 V[p-p] 75 Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity
automatically adjusted
VD:
TTL, high-impedance, positive/negative...")
55 Interface ports RGB2 input terminal Video input/output terminal S-video input terminal Serial input/output terminal Remote1 input/output terminal Remote2 terminal DVI-D terminal LAN terminal 1 set of high-density, D-sub 15p (female) [For YP BPRinput] Y: 1.0 V [p-p] synchronization signal included, P BPR: 0.7 V[p-p] 75 Ω [For RGB input] 0.7 V[p-p] 75 ΩFor G-SYNC: 1.0 V[p-p] 75 Ω HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted VD: TTL, high-impedance, positive/negative...
Page 56
56 Compatible Signal List NTSC/NTSC4.43/ PAL-M/PAL60 PAL/PAL-N/SECAM 480i 576i 480p 576p 1080/60i 1080/50i 720/60p VGA400 VGA480 SVGA MAC16 XGA MXGA MAC21 MSXGA SXGA UXGA720 720 720 720 720 720 1 920 1 920 1 280 640 640 640 640 640 640 640 800 800 800 800 800 832 1 024 1 024 1 024 1 024 1 024 1 152 1 152 1 152 1 152 1 280 1 280 1 280 1 280 1 400 1 600X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X480i 576i 480i 576i 483 576 1 080i 1 080i 720 400...
Page 57
![Page 57
57
Projection distances by projection lens
The table below shows the projection distances of optional projection lenses.
For the projection distance of the standard lens provided with the PT-D5500U (equipped with lens), refer to page 17.
For instructions on how to install the lenses, refer to page 21.
1.27
(50)
1.52
(60)
1.78
(70)
2.03
(80)
2.29
(90)
2.54
(100)
3.05
(120)
3.81
(150)
5.08
(200)
6.35
(250)
7.62
(300)
8.89
(350)
10.16
(400)
12.70
(500)
15.24
(600)
Diagonal
length
(SD)
0.76
[25]...](http://img.usermanuals.tech/thumb/58/75761/w300_pt-d5500u_om_d-56.png "Page 57
57
Projection distances by projection lens
The table below shows the projection distances of optional projection lenses.
For the projection distance of the standard lens provided with the PT-D5500U (equipped with lens), refer to page 17.
For instructions on how to install the lenses, refer to page 21.
1.27
(50)
1.52
(60)
1.78
(70)
2.03
(80)
2.29
(90)
2.54
(100)
3.05
(120)
3.81
(150)
5.08
(200)
6.35
(250)
7.62
(300)
8.89
(350)
10.16
(400)
12.70
(500)
15.24
(600)
Diagonal
length
(SD)
0.76
[25]...")
57 Projection distances by projection lens The table below shows the projection distances of optional projection lenses. For the projection distance of the standard lens provided with the PT-D5500U (equipped with lens), refer to page 17. For instructions on how to install the lenses, refer to page 21. 1.27 (50) 1.52 (60) 1.78 (70) 2.03 (80) 2.29 (90) 2.54 (100) 3.05 (120) 3.81 (150) 5.08 (200) 6.35 (250) 7.62 (300) 8.89 (350) 10.16 (400) 12.70 (500) 15.24 (600) Diagonal length (SD) 0.76 [25]...
Page 58
58 Dimensions LAMP1LAMP2POWERTEMP D LP>PC< TBMU448 RGB 2 IN VDSYNC/HDB/PBG/YRR/P SERIALREMOTE 1REMOTE 2 IN INOUTLANDVI-D INRGB 1 INVIDEO INS-VIDEO ININ OUT 86.5 (3 13/32) 167 (6 12/64) 157 (6 3/16) 530 (20 55/64) 436 (17 11/64) 368 (14 31/64) 425 (16 47/64) 441 (17 23/64) 4 (5/32) 12 (15/32) R30 478.5 (18 27/32) unit : mm ( ) : inch
Page 59
59 Trademark acknowledgments Note: Purchase of this equipment includes the rights to use this software (the built-in microcomputer and information recorded on ROMs) but does not grant copyrights. Do not reverse engineer, change or modify the software. The guarantee will not be valid for any malfunctions caused by such actions. Trademark Acknowledgement • Digital Light Processing, DLP, and Digital Micromirror Device, DMD are registered trademarks of the Texas Instruments. • VGA and XGA are trademarks of...
Page 60
60 NOTES IMPORTANTES CONCERNANT LA SÉCURITÉ AVERTISSEMENT: POUR RÉDUIRE LES RISQUES DE FEU OU DE CHOC ÉLECTRIQUE, NE PAS EXPOSER CE PRODUIT À L’EAU OU À L’HUMIDITÉ WARNING RISK OF ELECTRIC SHOCK. DO NOT OPEN MISE EN GARDE- WARNUNG- RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR. ZUR VERMEIDUNG EINES ELEKTRISCHEN SCHLAGES GERÄT NICHT ÖFFNEN. Le symbole de la flèche en forme d’éclair, dans un triangle, avertit l’usager de la présence de “tensions dangereuses” à l’intérieur du produit qui peuvent être de force...