Panasonic DLP Projector PT-DW740E PT-DW740EL PT-DX810E PT-DX810EL Operating Instructions

ENGLISH - 51
Chapter 4 Settings — Menu navigation
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector .
Navigating through the menu
Operating procedure
 button
1) 
Press the  button on the remote 
control or the control panel.
r
f The 
[MAIN MENU]  screen is displayed.
(17(5
0$,10(18
3,&785(
326,7,21
$9 $1&(0(18
,63/$ 

52 - ENGLISH
Chapter 4 Settings — Menu navigation
1) Press the  button on the remote 
control.

&2175$67
$-867
Note
r
f You cannot reset all the settings to the factory default at once.
r
f To reset all the settings adjusted in the sub-menu item to the factory default at a time, perform initialization from the [PROJECTOR SETUP] 
menu 
→ [INITIALIZE] (
x page 84).
r
f Some menu items cannot be reset by pressing the  button. Adjust each item manually.
r
f The triangular mark under the bar scale in the...

ENGLISH - 53
Chapter 4 Settings — Menu navigation
Sub-menu item Factory defaultPage
[SYSTEM DAYLIGHT VIEW] [OFF]
*57
[SHARPNESS] [6]58
[NOISE REDUCTION] [1]
*58
[AI] [ON]58
[SYSTEM SELECTOR] [YP
BPR]*59
* Depends on the signal input.
Note
r
f The factory default settings may vary depending on the picture mode.
[POSITION] 
Sub-menu item
Factory defaultPage
[SHIFT] ―60
[ASPECT] [DEFAULT]
*60
[ZOOM] ―61
[CLOCK PHASE] [16]62
[KEYSTONE] ―63
* Depends on the signal input.
[ADVANCED MENU] 
Sub-menu item Factory...

54 - ENGLISH
Chapter 4 Settings — Menu navigation
[PROJECTOR SETUP] 
Sub-menu item Factory defaultPage
[PROJECTOR ID] [ALL]75
[PROJECTION METHOD] [FRONT/FLOOR]75
[COOLING CONDITION] [FLOOR SETTING]76
[HIGH ALTITUDE MODE] [OFF]76
[LAMP SELECT] [DUAL]76
[LAMP RELAY] [OFF]77
[LAMP POWER] [NORMAL]77
[STANDBY MODE] [NORMAL]78
[SCHEDULE] [OFF]78
[STARTUP INPUT SELECT] [LAST USED]79
[RS-232C] ―80
[REMOTE2 MODE] [DEFAULT]81
[STATUS] ―81
[NO SIGNAL SHUT-OFF] [DISABLE]82
[FUNCTION BUTTON] ―82
[DATE AND TIME] ―83...

ENGLISH - 55
Chapter 4 Settings — [PICTURE] menu
[PICTURE] menu
Select [PICTURE] from the main menu, and select the item from the sub-me\
nu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f After selecting the item, press 
asqw to adjust.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source \
and the environment in which the projector is used.
1) Press as to select [PICTURE MODE].
2) Press qw or the  button.
r
f The...

56 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
3) Press qw to adjust the level.
r
r Operations and adjustment range
Operation
Adjustment Range
Press  w. Increases the brightness of the dark (black) parts of the 
screen.
-31 - +31
Press  q.
Reduces the brightness of the dark (black) parts of the screen.
[COLOR]
You can adjust the color saturation of the projected image.
1) Press as to select [COLOR].2) Press qw or the  button.
r
f The 
[COLOR]  individual adjustment screen is displayed.
3) Press qw to...

ENGLISH - 57
Chapter 4 Settings — [PICTURE] menu
6) Press the  button.
r
f The 
[WHITE BALANCE]  screen is displayed.
7) Press as to select [WHITE BALANCE HIGH] 
or [WHITE BALANCE LOW].
8) Press the  button.
r
f The 
[WHITE BALANCE HIGH]  screen or the [WHITE 
BALANCE LOW]  screen is displayed.
9) Press as to select [RED], [GREEN], or [BLUE].
10) Press qw to adjust the level.
r
r Adjustment details
Item
Operation Adjustment Range
[RED] Press 
w.
Deepens red.
[WHITE BALANCE HIGH]: 0 - +255 (factory...

58 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
2) Press qw or the  button.
r
f The 
[SYSTEM DAYLIGHT VIEW]  individual adjustment screen 
is displayed.
3) Press qw to switch [SYSTEM DAYLIGHT 
VIEW].
r
f The setting will change among [OFF], [1], [2] and [3] each time 
you press the button.
r
r [SYSTEM DAYLIGHT VIEW]
[OFF]
No correction.
[1] Corrects the image to weaken vividness.
[2] Corrects the image to medium vividness.
[3] Corrects the image to high vividness.
[SHARPNESS]
You can adjust the...

ENGLISH - 59
Chapter 4 Settings — [PICTURE] menu
[SYSTEM SELECTOR]
The projector will automatically detect the input signal, but you can se\
t the system method manually when an unstable signal is input. Set the 
system method matching the input signal.
1) Press as to select [SYSTEM SELECTOR].
2) Press the  button.
3) Press as to select a system format.
4) Press the  button.
r
r Available system formats
Terminals
System format
 terminal,
 terminal Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M],...

60 - ENGLISH
Chapter 4 Settings — [POSITION] menu
[POSITION] menu
Select [POSITION] from the main menu, and select the item from the sub-m\
enu.
Refer to “Navigating through the menu” (
x page 51) for the operation of the menu screen.
r
f After selecting the item, press 
asqw to adjust.
[SHIFT]
You can move the image position vertically or horizontally if the image p\
osition projected on the screen is shifted even when the relative 
position of the projector and the screen is installed correctly.
1)...