Panasonic DLP Projector PT-DZ21K2 PT-DS20K2 PT-DW17K2 PT-DZ16K2 Operating Instructions

Chapter 2 Getting Started — Attaching/removing the projection lens (optional)
ENGLISH - 51
Removing the projection lens
Remove the projection lens using the following procedure.
(i)
(i)
(i)
(i)
(ii)
Lens release buttonFig. 2
Fig. 1 Lens mount cover
1) Remove the lens mount cover
. (Fig. 1)
 fRemove the lens mount cover by pulling it towards you while holding the \
left and right buttons from both the 
upper and lower side.
2)

 
Remove the lens fixing screw
 .
 fUse a Phillips screwdriver to remove the...

Chapter 2 Getting Started — Connecting
52 - ENGLISH
Connecting
Before connecting
 fBefore connecting, carefully read the operating instructions for the external device to be connected.
 fT

urn off the power of all devices before connecting cables.
 fT

ake note of the following points before connecting the cables. Failure to do so may result in malfunctions.
 g When connecting a cable to a device connected to the projector or the pr\
ojector itself, touch any nearby 
metallic objects to eliminate static...

Chapter 2 Getting Started — Connecting
ENGLISH - 53
 terminal pin assignments and signal names
Outside viewPin No.Signal name Pin No.Signal name
(17)
(24)
(16)
(9)
(1)
(8)
(1) T.M.D.S data 2-(13) ―
(2) T.M.D.S data 2+ (14)+5
  V
(3) T.M.D.S data 2/4 shield (15)GND
(4) ―(16)Hot plug detection
(5) ―(17)T.M.D.S data 0
-
(6) DDC clock (18)T.M.D.S data 0+
(7) DDC data (19)T.M.D.S data 0/5 shield
(8) ―(20) ―
(9) T.M.D.S data 1
-(21) ―
(10) T.M.D.S data 1+ (22)T.M.D.S clock shield
(11) T.M.D.S data 1/3 shield...

Chapter 2 Getting Started — Connecting
54 - ENGLISH
For / terminals (PT-DZ21K2, PT- DS20K2),  terminal (PT- DZ16K2)
The connection example is for PT-DZ21K2 and PT- DS20K2.
SD-SDI signal, HD-SDI signal, or 3G-SDI 
signal
Digital VCR for commercial use
Note
 f
Use the [PICTURE] menu  → [SYSTEM SELECTOR] to switch the input format. fSome external devices to be connected require the [DISPLA
Y OPTION] menu → [SDI IN] to be set.
 fUse a 5CFB or higher (such as 5CFB, or 7CFB) or a Belden 1694A

 or higher...

Chapter 2 Getting Started — Connecting
ENGLISH - 55
Connecting example using DIGITAL LINK
Twisted-pair-cable transmitters based on the communication standard HDBaseTTM such as the optional DIGITAL 
LINK output supported device (Model No.: ET
-

YFB100G, ET
-

YFB200G) use the twisted pair cable to transmit 
input images, Ethernet, and serial control signals, and the projector can input these digital signals to the  terminal.
Blu-ray disc player HDMI cable
(commercially available)
Control computer*1...

Chapter 2 Getting Started — Connecting
56 - ENGLISH
 fFor twisted-pair-cable transmitters of other manufacturers of which the operation has been verified with the projector , visit the Panasonic 
website (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made for the items set 
by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused by the devices of 
other manufacturers, contact the...

ENGLISH - 57
Chapter 3 Basic Operations
This chapter describes basic operations to start with. 

Chapter 3 Basic Operations — Switching on/off the projector
58 - ENGLISH
Switching on/off the projector
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being 
removed easily.
Confirm that the  switch is on the  side before connecting the power cord.
For details of power cord handling, refer to “Read this first!” (x page 5).
How to attach the power cord
1) Check the shapes of the  terminal on the side of the projector and the...

Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 59
Note
 fWhile the power indicator  lights in orange, the fan is running to cool the projector. fFor about 150 seconds after the projector is switched of
f and the luminous lamp cooling is started, the lamp indicators do not light up even if 
the power is switched on. After the power indicator  lights in red, turn on the power again.
 f The projector consumes power even in standby mode (power indicator  lit in red). Refer to “Power...

Chapter 3 Basic Operations — Switching on/off the projector
60 - ENGLISH
When the initial setting screen is displayed
When the projector is switched on for the first time after purchase, as well as when [ALL USER DATA] is executed 
from the [PROJECTOR SETUP] menu → [INITIALIZE], the focus adjustment screen is displayed after projection 
starts, then the [INITIAL SETTING]  screen is displayed. Set them according to the circumstances.
In other occasions, you can change the settings by menu operations.
If...