Panasonic Dmc Fh20 Operaing Instructions Manual

							- 61 -
Advanced (Recording pictures)
This allows you to take vivid pictures of the nightscape.Note
• The flash setting is fixed to [ Œ].
• The focus range is 5 m (16.4 feet) to  ¶.
• We recommend using a tripod and the self-timer for taking pictures.
• When the camera is set to [STABILIZER] and there is very little jitter, or if [STABILIZER] is set 
to [OFF], shutter speed may slow down up to 8 seconds.
• The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal 
processing. This is not a malfunction.
• Noise may become visible when you take pictures in dark places.
This mode allows you to take pictures of  food with a natural hue without being affected by 
the ambient light in restaurants etc.
Note
• The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to  ¶.
 [NIGHT SCENERY]
 [FOOD]  
						

							Advanced (Recording pictures)
- 62 -
Select this when you want to take pictures at a wedding reception, an indoor party etc. 
This allows you to take pictures of people and the background with near real-life 
brightness.
∫Technique for Party Mode
• Use the flash. (You can set to [ ] or [ ].)
• We recommend using a tripod and the self-timer for taking pictures.
• We recommend rotating the zoom lever to Wide (1 k) and being about 1.5 m (4.92 feet) from 
the subject when taking pictures.
Note• The initial setting for [AF MODE] is [ š].
This mode allows you to take pictures with a candle-lit atmosphere.
∫Technique for Candle Light Mode
• This is more effective when taking pictures without using the flash.
Note• The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to  ¶.
• We recommend using a tripod and the self-timer for taking pictures.
• When the camera is set to [STABILIZER] and there is very little jitter, or if [STABILIZER] is set  to [OFF], shutter speed may slow down up to 1 second.
• The initial setting for [AF MODE] is [
š].
  [PARTY]
 [CANDLE LIGHT] 
						

							- 63 -
Advanced (Recording pictures)
This takes pictures of a baby with a healthy complexion. When you use the flash, the light 
from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can 
select to have these appear at the time of playback, or have them stamped on the 
recorded image using [TEXT STAMP]  (P97).
∫ Birthday/Name setting
1Press  3/4  to select [AGE] or [NAME] and then press  1.2Press  3/4  to select [SET] and then press [MENU/SET].
3Enter the birthday or name.
Birthday:
2/1 : Select the items (year/month/day).
3 /4 :Set.
[MENU/SET]: Exit.
Name: For details on how to enter characters, refer to “Entering Text” on  P89.
• When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
• If [ON] is selected when the birthday or name has not been registered, the setting screen 
appears automatically.
4Press [MENU/SET] to finish.
∫ To cancel [AGE] and [NAME]
Select the [OFF] setting in step 
2 of the “Birthday/Name setting” procedure.
Note
• The age and name can be printed out using the “PHOTOfunSTUDIO” bundled software on the  CD-ROM (supplied).
• If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or  name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
• The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to  ¶.
• When the camera is set to [STABILIZER] and there is very little jitter, or if [STABILIZER] is set  to [OFF], shutter speed may slow down up to 1 second.
• [ ] in [SENSITIVITY] is activated, and maximum ISO sensitivity level becomes [ISO1600].
• If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the  lower left of the screen for about 5 seconds, along with the current date and time.
• If the age is not properly displayed, check the clock and birthday settings.
• The birthday setting and name setting can be reset with [RESET].
• The initial setting for [AF MODE] is [ š].
 [BABY1]/[BABY2] 
						

							Advanced (Recording pictures)
- 64 -
Select this when you want to take pictures of a pet such as a dog or a cat.
You can set your pet’s birthday and name. You can select to have these appear at the time 
of playback, or have them stamped on the recorded image using [TEXT STAMP] (P97).
For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P63 .
Note
• The initial setting for the AF Assist Lamp is [OFF].
• The initial setting for [AF MODE] is [ Ø].
• Refer to [BABY1]/[BABY2] for other information about this mode.
Select this when you want to take pictures of a sunset view. This allows you to take vivid 
pictures of the red color of the sun.
Note
• The flash setting is fixed to [ Œ].
• ISO sensitivity is fixed to [ISO80].
This mode minimizes the jitter of the subjects , and enables you to take pictures of these 
subjects in dimly lit rooms. (Select this fo r high-sensitivity processing. The Sensitivity 
automatically switches to between [ISO1600] and [ISO6400].)
∫ Picture Size
1Press  3/4  to select the Picture Size and then press [MENU/SET] to set.• 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the Picture Size.2Take pictures.
Note
• You can take pictures suitable for 4 qk6q/10 k15 cm printing.
• The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to  ¶.
 [PET]
 [SUNSET]
  [HIGH SENS.] 
						

							- 65 -
Advanced (Recording pictures)
This is a convenient mode for shooting rapid movement or a decisive moment.
∫Picture Size
1Press  3/4  to select the Picture Size and then press [MENU/SET] to set.• 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the Picture Size.2Take pictures.• Still pictures are taken continuously while the shutter button is pressed fully.
• The burst speed changes according to the recording conditions.
• The number of burst recording pictures are limited by the picture-taking conditions and the type  and/or status of the card used.
• The number of burst recording pictures increase immediately after formatting.
Note• The flash setting is fixed to [ Œ].
• You can take pictures suitable for 4 qk6q/10 k15 cm printing.
• The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to  ¶.
• The focus, zoom, exposure, white balance, shutter speed and ISO sensitivity are fixed to the  settings for the first picture.
• The ISO sensitivity automatically switches to between [ISO500] and [ISO800]. However, the  ISO sensitivity is increased to make the shutter speed become high-speed.
• Depending on the operating conditions, it may take time to take the next picture.
 [HI-SPEED BURST]
Maximum Burst 
speed approx. 4.6 pictures/second (DMC-FH20/DMC-FH3)
approx. 5.5 pictures/second (DMC-FH1)
Number of 
recordable picturesapprox. 15 (built-in memory)/approx. 15 to 100
¢ (card) (DMC-FH20/
DMC-FH3)
approx. 10 (built-in memory)/approx. 10 to 100
¢ (card) (DMC-FH1)
¢ the maximum is 100. 
						

							Advanced (Recording pictures)
- 66 -
Still pictures are taken continuously with flash. It is convenient to take continuous still 
pictures in dark places.
∫Picture Size
1Press  3/4  to select the Picture Size and then press [MENU/SET] to set.• 3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the Picture Size.2Take pictures.• Still pictures are taken continuously while the shutter button is pressed fully.
Note• You can take pictures suitable for 4 qk6q/10 k15 cm printing.
• The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to  ¶.
• The focus, zoom, exposure, shutter speed, ISO sensitivity, and flash level are fixed to the  settings for the first picture.
• The shutter speed becomes 1/30th of a second to 1/1600th of a second.
• [ ] in [SENSITIVITY] is activated, and maximum ISO sensitivity level becomes [ISO3200].
• See the Note on  P51 when using the flash.
 [FLASH BURST]
Number of recordable 
pictures max. 5 pictures 
						

							- 67 -
Advanced (Recording pictures)
This allows you to take vivid pictures of a starry sky or a dark subject.
∫ Setting the shutter speed
Select a shutter speed of [15 SEC.], [30 SEC.] or [60 SEC.].
1Press  3/4  to select the number of seconds and then press [MENU/SET].• It is also possible to change the number of seconds using the quick menu.  (P23)2Take pictures.• Press the shutter button fully to display the countdown screen. Do 
not move the camera after this screen is displayed. When 
countdown finishes, [PLEASE WAIT...] is displayed for the same 
length of time as the set shutter speed for signal processing.
• Press [MENU/SET] to stop taking the picture while the countdown 
screen is displayed.
∫ Technique for Starry Sky Mode• The shutter opens for 15, 30 or 60 seconds. Be sure to use a tripod. We also recommend 
taking pictures with the self-timer.
Note• The flash setting is fixed to [ Œ].
• The Optical Image Stabilizer function is fixed to [OFF].
• ISO sensitivity is fixed to [ISO80].
  [STARRY SKY] 
						

							Advanced (Recording pictures)
- 68 -
This mode allows you to take beautiful pictures of fireworks exploding in the night sky.
∫Technique for Fireworks Mode
• Since the shutter speed becomes slower, we recommend using a tripod.
Note• The flash setting is fixed to [ Œ].
• This mode is most effective when the subject is 10 m (32.8 feet) or more away.
• The shutter speed changes accordingly: – When [OFF] is set on the Optical Image  Stabilizer function:Fixed to 2 seconds
– When [AUTO], [MODE1] or [MODE2] is set on the Optical Image Stabilizer function: 1/4th of a  second or 2 seconds (The shutter speed becomes 2 seconds only when the camera has 
determined that there is little jitter such as when using a tripod etc.)
– You can change the shutter speed by compensating the exposure.
• The AF area is not displayed.
• ISO sensitivity is fixed to [ISO80].
This allows you to take even more vivid pictures of the blue color of the sea, sky etc. It also 
prevents underexposure of people  under strong sunlight.
Note
• The initial setting for [AF MODE] is [ š].
• Do not touch the camera with wet hands.
• Sand or seawater will cause the camera to malfun ction. Make sure that sand or seawater does 
not get onto the lens or in the terminals.
• Problems caused by sand, seawater and fresh water are not covered by the product warranty.
This allows you to take pictures that show t he snow as white as possible at a ski resort or 
a snow-covered mountain.
  [FIREWORKS]
  [BEACH]
 [SNOW] 
						

							- 69 -
Advanced (Recording pictures)
This mode allows you to take pictures through an airplane window.
∫Technique for Aerial Photo Mode
• We recommend using this technique if it is difficult to focus when taking pictures of clouds etc. 
Aim the camera at something with high contrast, press the shutter button halfway to fix the 
focus and then aim the camera at the subject and press the shutter button fully to take the 
picture.
Note• The flash setting is fixed to [ Œ].
• The focus range is 5 m (16.4 feet) to  ¶.
• Turn the camera off when taking off or landing.
• When using the camera, follow all instructions from the cabin crew.
• Be careful about the reflection from the window.
Picture is taken with a grainy texture as though blasted with sand.
Note
• ISO sensitivity is fixed to [ISO1600].
• The focus range is 5 cm (0.17 feet) (Wide)/1 m (3.28 feet) (Tele) to  ¶.
Record the image with a frame around it.
∫ Setting the frame
1Press  2/1  to select the frame to use, and then press [MENU/SET].• The number of pixels is fixed to 2M (4:3).2Take pictures.
Note
• [AUTO REVIEW] is fixed to [2SEC.].
• The color of the frame displayed on the screen and the color of the frame around the actual  image may differ, but this is not a malfunction.
 [AERIAL PHOTO]
 [FILM GRAIN]
 [PHOTO FRAME] 
						

							Advanced (Recording pictures)
- 70 -
[REC] Mode: n
Advanced (Recording pictures)Motion Picture Mode
Slide the [REC]/[PLAYBACK] selector switch to [!], and then press 
[MODE].
Press  3/4 to select [MOTION PICTURE], and then press [MENU/
SET].
Press the shutter button halfway to focus 
and then press it fully to start recording.
A Audio recording
• The available recording time  B is displayed on the top 
right and the elapsed recording time  C is displayed on 
the bottom right of the screen.
• After pressing the shutter button fully, release it straight 
away.
• When the subject is focused, the focus indication  lights.
• The focus and zoom are fixed to the setting when  recording starts (the first frame).
• The audio is also recorded simultaneously from the 
built-in microphone on this unit. (Motion pictures 
cannot be recorded without audio.)
Press the shutter button fully to stop recording.
• If the built-in memory or the card becomes full in the middle of recording, the camera stops recording automatically.
C
AB