Panasonic Dmc Fx700 Operating Instructions Manual

							- 91 -
Advanced (Recording pictures)
Still pictures can be recorded even while recording a motion picture. It is also possible to 
record with burst.
∫Taking a still picture while recording a motion picture
During motion picture recording, press the shutter 
button fully to record a still picture.
∫ Burst during motion picture recording
1Setup burst before starting motion picture recording.2Hold down the shutter button fully while recording motion pictures.
•When set to [ ] or [ ], settings will automatically be [ ].
When set to [ ] or [ ], focus will be fixed to the settings for the first picture.
Note
•Recordable pixels and recordable number of pictures are displayed by pressing the shutter 
button halfway.
•Recording of motion picture will continue after taking the still picture.•Recording is performed by the electronic shutter, so the recorded picture may appear warped. 
(P195)
•Simultaneously recorded still pictures will be recorded in an aspect ratio of [ W], and picture 
size of [3.5M]. The picture quality may be different from [3.5M] of standard pictures.
•You can also take pictures using the Touch Shutter function  (P43).•Up to 40 still pictures can be recorded during recording of the motion picture.•The flash setting is fixed to [ Œ].•Zooming may stop when a picture is recorded while zooming.•Simultaneous recording is not possible when set to [AVCHD(720p)].•Simultaneous recording is not possible when [ ] or [ ] is set in [MOTION JPEG].•Operation sound of the shutter button may be recorded when a picture is taken during motion 
picture recording.
Taking pictures or taking pictures with Burst while recording Motion Pictures
406010 
						

							Advanced (Recording pictures)
- 92 -
•When Intelligent Auto Mode is selected in step 2 on page 88, motion picture recording 
matching to the subject or recording situation can be performed.
∫ Scene Detection
When the camera identifies the optimum scene, the icon of the scene concerned is 
displayed in blue for 2 seconds, after which its color changes to the usual red.
•
[¦] is set if none of the scenes are applicable, and the standard settings are set.•When [ ] is selected, the camera automatically detects a person’s face, and it will adjust the 
focus and exposure.  (Face Detection) (P117)
Note
•Refer to P37  for settings in Intelligent Auto Mode.•Due to conditions such as the ones below, a different scene may be identified for the same 
subject.
–Subject conditions: When the face is bright or dark, the size of the subject, the color of the 
subject, the distance to the subject, the contrast of the subject, when the subject is moving
–Recording conditions: Sunset, sunrise, under low brightness conditions, when the camera is 
shaken, when zoom is used
•To take pictures in an intended scene, it is recommended that you take pictures in the 
appropriate Recording Mode.
When set to Intelligent Auto Mode
¦
>[i-PORTRAIT]
[i-SCENERY]
[i-LOW LIGHT]
[i-MACRO] 
						

							- 93 -
Advanced (Recording pictures)
Select the item and then touch [SET].
¢The SD Speed Class Rating is the speed standard for successive writes.
Touch [REC QUALITY].
Changing [REC MODE] and [REC QUALITY]
Touch [REC MODE] on the 
[MOTION PICTURE] Mode menu.  (P23)
Recording formatFeatures
[AVCHD(1080i)]
[AVCHD(720p)]
•Select this format to record HD (high definition) video for 
playback on your HDTV using an HDMI connection.
•It can be played back as is by inserting the card into a device 
compatible with AVCHD. Refer to the instructions of the 
device used for details on compatibility.
•Use a card with SD Speed Class¢ with “Class 4” or higher.•[AVCHD(1080i)] can record motion pictures with even higher 
definition and picture quality than [AVCHD(720p)].
[MOTION JPEG]
•Select this format to record standard definition video for 
playback on your PC. It can be recorded using less storage 
when there is not much space left on the memory card or 
when you want to attach the motion picture to an e-mail.
•Use a card with SD Speed Class¢ with “Class 6” or higher. 
						

							Advanced (Recording pictures)
- 94 -
To u c h  t h e  i t e m .
When [AVCHD(1080i)] is selected in step 2
When [AVCHD(720p)] is selected in step 2
¢1What is bit rate
This is the volume of data for a definite period of time, and the quality becomes 
higher when the number gets bigger. This unit is using the “VBR” recording method. 
“VBR” is an abbreviation of “Variable Bit Rate”, and the bit rate (volume of data for 
definite period of time) is changed automatically depending on the subject to record. 
Therefore, the recording time is shortened when a subject with fast movement is 
recorded.
¢ 2What is Mbps
This is an abbreviation of “Megabit Per Second”, and it represents the speed of 
transmission.
•
The following functions are not available when set to [AVCHD(720p)].–Tracking AF–Burst, or still picture recording during motion picture recording•In the following Scene Modes, it will automatica lly switch to [AVCHD(1080i)] when set to 
[AVCHD(720p)]. (When [SH], it will switch to [FSH], and when [H], it will switch to [FH])
–[TRANSFORM]/[NIGHT PORTRAIT]/[NIGHT SCENERY]/[HANDHELD NIGHT 
SHOT]/[HIGH SENS.]/[STARRY SKY]/[PIN HOLE]/[FILM GRAIN]/[HIGH DYNAMIC]
ItemQuality (bit rate)¢ 1fpsAspect 
ratio 
High 
quality
Longer  time([FSH]) 1920k
1080 pixels 
Approx. 17 Mbps¢ 2
Full high 
definition 60i
(Sensor 
output is  30 fps) 16:9
([FH]) 1920k
1080 pixels 
Approx. 13 Mbps
¢ 2
ItemQuality (bit rate)¢1fpsAspect 
ratio 
High 
quality
Longer  time([SH]) 1280k
720 pixels 
Approx. 17 Mbps¢ 2
High 
definition 60p
(Sensor 
output is 
60 fps) 16:9
([H]) 1280k
720 pixels 
Approx. 13 Mbps
¢ 2
4)
) 
						

							- 95 -
Advanced (Recording pictures)
When [MOTION JPEG] is selected in step 2
¢1This item cannot be set in the Intelligent Auto Mode.
•With the [AVCHD] or [ ] for [MOTION JPEG], high quality motion picture can be 
enjoyed on the TV by using the HDMI mini cable (optional). For details, see “Playing 
back on the TV with HDMI socket” on  P162 .•It cannot be recorded to built-in memory except for the [ ].
Touch [EXIT] to close the menu.
•You can also press the shutter button halfway to close the menu.
Note
•The motion picture recording may stop in the middle when any of the following cards are used.–Cards on which recording and deleting have been repeated many times–Cards which have been formatted using a PC or other equipment
Before taking pictures, format  (P31) the card in the unit. Because formatting will delete all data 
recorded on the card, save important data beforehand on the computer.
•You may not be able to record for a short while after turning the power [ON] when using a large 
capacity card.
•Motion pictures recorded in [AVCHD] or [MOTION JPEG] may be played back with poor 
picture or sound quality or playback may not be possible even when played back with 
equipment compatible with these formats. Also, the recording information may not be 
displayed properly. In this case, use this unit.
For details on AVCHD compatible devices, refer to the support sites below.
http://panasonic.jp/support/global/cs/dsc/(This Site is English only.)•Motion picture recorded in [AVCHD] does not comp ly with the “DCF/Exif”, so some information 
will not display while playback.
•The sound recording specifications on this model have been changed to improve audio 
quality. For this reason, some motion pictures recorded in [MOTION JPEG] may not be 
played back with Panasonic digital cameras (LUMIX)
¢ 2.
(Motion pictures recorded with a Panasonic digital camera (LUMIX) can be played back 
on this model.)
¢ 2 Models launched before December 2008, and some models launched in 2009 (FS, LS 
series).
•To play back AVCHD motion pictures recorded with this unit on Panasonic Blu-ray Disc Players 
(DMP-BD30/DMP-BD31/DMP-BD50) it is necessary  to update the firmware of the Blu-ray Disc 
Player.
You can download the latest firmware version from the following website.
http://panasonic.net/support/
ItemPicture sizefpsAspect  ratio
High 
quality
Longer  time([HD]) 1280k720 pixels
3016:9
¢
1([WVGA])848 k480 pixels
([VGA]) 640 k480 pixels
4:3
([QVGA]) 320 k240 pixels 
						

							Advanced (Recording pictures)
- 96 -
[REC] Mode: 
Taking a Picture with Face Recognition Function
Face Recognition is a function which finds a face resembling a registered face and 
prioritizes focus and exposure automatically.  Even if the person is located towards the 
back or on the end of a line in a group photo, the camera can still take a clear picture.
•
The following functions will also work with the Face Recognition 
function.
In Recording Mode
–Display of corresponding name when camera detects a registered 
face¢ (if name has been set for the registered face)–The camera will remember the face that has been photographed 
many times and display the registration screen automatically 
(if [AUTO REGISTRATION] is set to [ON])
In Playback
 Mode
–Display of name and age (if information has been registered)–Selective playback of pictures chosen from pictures registered with Face Recognition 
([CATEGORY PLAY]  (P138))
¢ Names of up to 3 people are displayed. Precedence for the names displayed when taking 
pictures is determined according to the order of registration.
Note
•[AF MODE] is fixed to [ š].•During the Burst Mode, [FACE RECOG.] picture information can be attached to only the first 
picture.
•After pressing the shutter halfway down, a different person’s picture information may be added 
when the camera is turned to a different subject to photograph.
•[FACE RECOG.] can be used in the following Scene Modes.–[PORTRAIT]/[SOFT SKIN]/[SELF PORTRAIT]¢/[SCENERY]/[SPORTS]/
[NIGHT PORTRAIT]/[PARTY]/[CANDLE LIGHT]/[BABY1]/[BABY2]/[PET]/[SUNSET]/
[HIGH SENS.]/[BEACH]/[SNOW]/[PIN HOLE ]/[HIGH DYNAMIC]/[PHOTO FRAME]
¢ [AUTO REGISTRATION] is fixed to [OFF].
•[FACE RECOG.] will find a face similar to the registered face, and does not guarantee secure 
recognition of a person.
•Face Recognition may take more time to select and recognize distinctive facial features than 
regular Face Detection.
•Even when Face Recognition information has been registered, pictures taken with [NAME] set 
to [OFF] will not be categorized by Face Recognition in [CATEGORY PLAY].
•Even when Face Recognition information is changed (P100) , Face Recognition 
information for the pictures already taken will not be changed.
For instance, if the name is changed, pictures recorded before the change will not be 
categorized by Face Recognition in [CATEGORY PLAY].
•To change the name information of the pictures taken, perform the [REPLACE] in 
[FACE REC EDIT]  (P159).
[FACE RECOG.] is initially set to [OFF] on the camera.
[FACE RECOG.] will turn [ON] automatically when the face image is registered. 
						

							- 97 -
Advanced (Recording pictures)
You can register information such as names and birthdays for face images of up to 6 
people.
Registration can be facilitated by taking multiple face images of each person. (up to 3 
pictures/registration)
Face Settings
∫ Point of recording when registering the face images
•
Face front with eyes open and mouth closed, making sure the 
outline of the face, the eyes, or the eyebrows are not covered 
with the hair when registering.
•Make sure there is no extreme shading on the face when 
registering. (Flash will not flash during registration.)
(Good example for  registering)
∫ When it is not recognising during recording
•
Register the face of same person indoors and outdoors, or with different expressions or 
angles.  (P100)
•Additionally register at the location of recording.•Changing the [SENSITIVITY] setting.  (P101)•When a person who is registered is not recognized, correct by re-registering.
Example of faces that are hard to recognize
Face Recognition may not be possible or may not recognize 
faces correctly even for registered faces in the following 
instances, depending on the facial expression and environment.
•Hair is covering the eyes or the eyebrows ( A)•The face is dark/the light is at an angle (B)•The face is facing on angle or sideways•The face is facing upward/downward•The eyes are closed•When the face is extremely bright or dark•Hidden by sunglasses, glasses reflecting light, hair, hat, etc.•When the face appears small on the screen•The entire face is not in the screen•When distinctive facial features have changed with age•When parents and children or siblings closely resemble one 
another
•Facial expression is very different•When there is little contrast on the faces•When there is rapid movement•When the camera is shaking•When Digital Zoom is used
A
B 
						

							Advanced (Recording pictures)
- 98 -
Select [FACE RECOG.] on the [REC] Mode menu. (P23)
Touch [MEMORY].
Touch [NEW].
•[NEW] will not display if there are 6 people already 
registered. Delete a person already registered to 
register a new person.
Take the picture adjusting the face with 
the guide.
•The faces of subjects other than people (pets, etc.) 
cannot be registered.
•When recognition fails, a message will appear and 
the display will return to the recording screen. In this 
case, try taking the picture again.
Touch [YES].
Registering face image of new person 
						

							- 99 -
Advanced (Recording pictures)
Touch item to edit.
•You can register up to 3 face images.
Press the shutter button halfway to close the menu.
∫About the information 
•Information about face registration recording is displayed when [ ] on the recording screen in 
step4 on page  98 is touched. (Touch [CANCEL] to return to the recording screen.)
ItemDescription of settings
[NAME]
It is possible to register names.1Touch [SET].2Enter the name.
•For details on how to enter characters, refer to “Entering Text” 
section on  P128.
[AGE]
It is possible to register the birthday.1Touch [SET].
2Set the Year/Month/Day by touching [ 3]/[4] for each 
item, and touch [SET].
[FOCUS ICON]Change the displayed focus icon when the subject is focused.
Select and touch the focus icon.
[ADD IMAGES]
To add additional face images.
(Add Images)
1Touch [ADD].2Perform steps 4 and 5 in “Registering face image of new 
person”.
3Touch [CANCEL].
To delete one of the face images.
(Delete)
1Touch the face image to delete.2Touch [YES].3Touch [CANCEL].
•If there is only one image registered, it cannot be deleted. 
						

							Advanced (Recording pictures)
- 100 -
You can modify the pictures or information of an already registered person. You can also 
delete the information of the registered person.
1Select [FACE RECOG.] from the [REC] Mode menu. (P23)2Touch [MEMORY].3Touch the face image to edit or delete.
4Touch the item.
5Press the shutter button halfway to close the menu.
Change or delete the information for a registered person
ItemDescription of settings
[INFO EDIT]
Changing the information of an already registered person.
Perform step 6 in “Registering face image of new person”.
[PRIORITY]
The focus and exposure are preferentially adjusted for 
higher-priority faces.
Touch the position you wish to change in the order of 
registration.
Touch [SET].
[DELETE]Deleting information of a registered person.
Touch [YES].