Panasonic Dmc Fx75 Basic Operating Instructions Manual

							11(ENG) VQT2V46
9 Camera ON/OFF switch
10 Zoom lever
11 Motion picture button
12 Speaker
13 Microphone
14 Shutter button
15 Lens barrel
16 [HDMI] socket
17 [AV OUT/DIGITAL] socket
18 Tripod receptacle
•When you use a tripod, make sure 
the tripod is stable when the 
camera is attached to it.
19 Card/Battery door
20 Release lever
21 DC coupler cover
•When using an AC adaptor, ensure that 
the Panasonic DC coupler (DMW-DCC4; 
optional) and AC adaptor (DMW-AC5PP; 
optional) are used.
•Always use a genuine Panasonic AC 
adaptor (DMW-AC5PP; optional).
•We recommend you use a battery with 
sufficient battery power or the AC adaptor 
when recording motion pictures.
•If while recording motion pictures using the 
AC adaptor the power supply is cut off due 
to a power cut or if the AC adaptor is 
disconnected etc., the motion picture being 
recorded will not be recorded.
11
141213 10
9
16
17
15
1819
2021
DMC-FX70&FX75P-VQT2V46_eng.book  11 ページ  ２０１０年６月１４日　月曜日　午前９時２９分 
						

							VQT2V46 (ENG)12
How to Use the Touch Panel
This touch panel is a type that detects pressure.
Operation or settings are performed by directly touching the icons displayed on 
the LCD monitor (touch panel) or by moving while touching the touch panel 
(dragging) using your fingers or the supplied stylus pen.
Touch the screen
To touch and release the touch panel.DragA movement without releasing the touch 
panel.
Use this to perform tasks such as selecting 
icons or images displayed on the touch 
panel.
You can make settings by touching the 
items displayed on the screen.
You can exit without saving the settings 
by touching [CANCEL].
•It may not operate properly when 
multiple icons are touched 
simultaneously, so try to touch the 
center of the icon. This is used when performing tasks 
such as moving to the next image by 
dragging horizontally, or changing the 
range of the displayed image.
This can also be used to perform tasks 
such as switching the screen by 
oper ating the sli de bar.
•If you select wrong icon, you can 
drag to different icon, and it will 
select that icon by releasing the 
finger.
VQT2V46~Body1_eng.fm  12 ページ  ２０１０年６月１６日　水曜日　午後３時２３分 
						

							13(ENG) VQT2V46
Note
•
The touch panel does not operate when the LCD 
monitor is turned off.
•If you use a commercially available liquid crystal 
protection sheet, please follow the instructions that 
accompany the sheet. (Some liquid crystal 
protection sheets may impair visibility or operability.)
•Apply a little extra pressure when touching if you 
have a commercially available protection sheet 
affixed or if you feel it is not responding well.
•Touch panel will not operate properly when the hand holding this unit is pressing 
on the touch panel.
•Do not press using anything with a sharp tip or anything hard, except for the 
supplied stylus pen.•Do not operate with your fingernails.•Wipe the LCD monitor with dry soft cloth when it gets dirty with finger prints and 
others.
•Do not scratch or press the LCD monitor too hard.
∫ About the Stylus penIt is easier to use the stylus pen (supplied) for detailed 
operation or if it is hard to operate with your fingers.
•Do not place it where small children can reach.•Do not place the stylus pen on the LCD monitor 
when storing. LCD monitor may break when the 
stylus pen is pressed strongly against the LCD 
monitor.
VQT2V46~Body1_eng.fm  13 ページ  ２０１０年６月１６日　水曜日　午後２時１０分 
						

							VQT2V46 (ENG)14
Charging the Battery
∫About batteries that you can use with this unitThe battery that can be used with this unit is DMW-BCF10PP.
•Use the dedicated charger and battery.•The camera has a function for distinguishing batteries which can be used 
safely. The dedicated battery (DMW-BCF10PP) supports this function. The 
only batteries suitable for use with this unit are genuine Panasonic 
products and batteries manufactured by other companies and certified by 
Panasonic. (Batteries which do not support this function cannot be used). 
Panasonic cannot in any way guarantee the quality, performance or safety 
of batteries which have been manufactured by other companies and are 
not genuine Panasonic products.
∫Charging
•The battery is not charged when the camera is shipped. Charge the battery 
before use.
•Charge the battery with the charger indoors.•It is recommended to charge the battery in a temperature between 10 oC to 
30 oC (50 oF to 86 oF). (The battery temperature should also be the same.)
It has been found that counterfeit battery packs which look very similar 
to the genuine product are made available to purchase in some markets. 
Some of these battery packs are not adequately protected with internal 
protection to meet the requirements of appropriate safety standards. 
There is a possibility that these battery packs may lead to fire or 
explosion. Please be advised that we are not liable for any accident or 
failure occurring as a result of use of a counterfeit battery pack. To 
ensure that safe products are used we would recommend that a genuine 
Panasonic battery pack is used.
Attach the battery paying 
attention to the direction of the 
battery.
VQT2V46~Body1_eng.fm  14 ページ  ２０１０年６月１４日　月曜日　午前１１時１１分 
						

							15(ENG) VQT2V46
∫ About the [CHARGE] indicator
•
When the [CHARGE] indicator flashes–The battery temperature is too high or too low. It is recommended to charge the 
battery again in an ambient temperature of between 10oC to 30oC (50oF to 86oF).–The terminals of the charger or the battery are dirty. In this case, wipe them 
with a dry cloth.
∫ Charging time
∫ Approximate operating time and number of recordable pictures
Recording conditions by CIPA standard•CIPA is an abbreviation of [Camera & Imaging Products Association].•Normal Picture Mode•Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when LCD monitor is on.•Using a Panasonic SD Memory Card (32 MB).•Using the supplied battery.•Starting recording 30 seconds after the camera is turned on. (When the Optical 
Image Stabilizer function is set to [AUTO].)
•Recording once every 30 seconds  with full flash every second recording.•Rotating the zoom lever from Tele to Wide or vice versa in every recording.•Turning the camera off every 10 recordings and leaving it until the temperature 
of the battery decreases.
Connect the charger to the 
electrical outlet.
•Disconnect the charger from the 
electrical socket and detach the battery 
after charging is completed.
The [CHARGE] 
indicator turns on:
The [ CHARGE] indicator A is turned on and charging will start.
The [CHARGE] 
indicator turns off: T he [CHARGE] indicator  A of the charger will turn off once 
the charging has completed without any problem.
Charging time Approx. 130 min
Number of recordable pictures Approx. 360 pictures
Recording timeApprox. 180 min
Playback timeApprox. 350 min
90
DMC-FX70&FX75P-VQT2V46_eng.book  15 ページ  ２０１０年６月１４日　月曜日　午前９時２９分 
						

							VQT2V46 (ENG)16
About the Built-in Memory/the Card
•Memory size: Approx. 40 MB•The built-in memory can be used as a temporary storage device when the card 
being used becomes full.
•The access time for the built-in memory may be longer than the access time for 
a card.
The following cards which conform to the SD video standard can be used with this 
unit.
(These cards are indicated as card  in the text.)
•Only cards bearing the SDHC logo (indicating that the card conforms to SD 
video standards) may be used as 4 GB to 32 GB cards.
•Only cards bearing the SDXC logo (indicating that the card conforms to SD 
video standards) may be used as 48 GB, 64 GB cards.
•Use a card with SD Speed Class¢ with “Class 4” or higher when recording 
motion pictures in [AVCHD Lite]. Also, use a card with SD Speed Class with 
“Class 6” or higher when recording motion pictures in [MOTION JPEG].
¢ SD Speed Class is the speed standard regarding continuous writing.
•Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Note
•Keep the Memory Card out of reach of children to prevent swallowing.
Built-in Memory
Card
Type of card which can  be used with this unitRemarks
SD Memory Card (8 MB 
to 2 GB)•SDHC Memory Card can be used with SDHC 
Memory Card or SDXC Memory Card compatible 
equipment.
•SDXC Memory Card can only be used with SDXC 
Memory Card compatible equipment.
•Check that the PC and other equipment are 
compatible when using the SDXC Memory Cards.
http://panasonic.net/avc/sdcard/information/
SDXC.html
SDHC Memory Card 
(4 GB to 32 GB)
SDXC Memory Card 
(48 GB, 64 GB)
DMC-FX70&FX75P-VQT2V46_eng.book  16 ページ  ２０１０年６月７日　月曜日　午後９時４５分 
						

							17(ENG) VQT2V46
Inserting and Removing the Card 
(optional)/the Battery
•Check that this unit is turned off.•We recommend using a Panasonic card.
Slide the release lever in the 
direction of the arrow and open 
the card/battery door.
•Always use genuine Panasonic 
batteries (DMW-BCF10PP).
•If you use other batteries, we cannot 
guarantee the quality of this product.
Battery: Insert until it is locked by 
the lever A being careful about 
the direction you insert it. Pull the 
lever A in the direction of the 
arrow to remove the battery.
Card: Push it fully until it clicks 
being careful about the direction 
you insert it. To remove the card, 
push the card until it clicks, then 
pull the card out upright.
B : Do not touch the connection terminals of the card.•The card may be damaged if it is not fully inserted.
1:Close the card/battery door.
2 :Slide the release lever in the 
direction of the arrow.
DMC-FX70&FX75P-VQT2V46_eng.book  17 ページ  ２０１０年６月７日　月曜日　午後９時４５分 
						

							VQT2V46 (ENG)18
Setting Date/Time (Clock Set)
•The clock is not set when the camera is shipped.
Touch [CLOCK SET].
Touch the items you wish to set (Year/
Month/Day/Hours/Minutes), and set 
using [3]/[4].
•Touch [CANCEL] to cancel the date and time 
settings without setting a date and time.
Touch [SET]  to set.
Touch [SET].
•Touch [CANCEL] to return to the settings 
screen.
Select [CLOCK SET] in the [REC] or [SETUP] menu.
•It can be changed in steps 3 and 4 to set the clock.
Turn the camera on.
Changing the Clock Setting
VQT2V46~Body1_eng.fm  18 ページ  ２０１０年６月１６日　水曜日　午前１１時１３分 
						

							19(ENG) VQT2V46
Setting the Menu
This section describes how to select the [REC] Mode menu settings, and the 
same setting can be used for the [MOTION PICTURE] Mode menu, [PLAYBACK] 
Mode menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [
Ø] to [š] in the Normal Picture Mode
Press [MENU] to display the menu.
Touch [AF MODE].
Touch [š].
•Depending on the item, its setting may not 
appear or it may be displayed in a different 
way.
Touch [EXIT] to close the menu.
Switching to other menus
e.g.: Switching to the [SETUP] menu
Touch the [SETUP] menu icon [ ].
•Select a menu item next and set it.
DMC-FX70&FX75P-VQT2V46_eng.book  19 ページ  ２０１０年６月１４日　月曜日　午前９時２９分 
						

							VQT2V46 (ENG)20
Mode switching
Selecting the [REC] Mode
∫List of [REC] Modes
Turn the camera on.
A [REC]/[PLAYBACK] selector switch
B [MODE] button
Slide the [REC]/[PLAYBACK] selector 
switch to [ !], and then press 
[MODE].
Touch the mode.
¦[INTELLIGENT AUTO]
The subjects are recorded using settings automatically selected by the 
camera.
![NORMAL PICTURE]
The subjects are recorded using your own settings.
[COSMETIC MODE]
Takes a picture adjusting the skin texture.
Û[SCENE MODE]
This allows you to take pictures that match the scene being recorded.
DMC-FX70&FX75P-VQT2V46_eng.book  20 ページ  ２０１０年６月７日　月曜日　午後９時４５分