Panasonic Dmc Fx90 Quick Start Guide

							4
 Touch [Yes].
A message will appear when the image has 
• 
been sent. Touch [OK].
Send still pictures or motion pictures from your camera to your smartpho\
ne 
1
  Turn the camera on and 
touch [ 
 ] to set Playback 
Mode.
2
 Touch  [ 
 ] to display the 
menu screen.
3
 Touch  [ 
 ] ([Wi-Fi Setup]).
1
 In Playback Mode, drag the 
screen horizontally and select 
an image.
Go to next image:  Drag from right to left
• 
Go to previous image: Drag from left to right
• 
2
  Press the [Wi-Fi] button.
3
 Touch  [ 
 ] ([Smartphone]).
A list of smartphones that can be connected  
• 
will appear. (This may take several minutes) 
Touch the destination name and touch 
[OK].
About the “LUMIX LINK”
 

“LUMIX LINK” is a smartphone application provided by Panasonic to \
receive still pictures or motion pictures sent from LUMIX models with Wi-Fi, or to stream 
live to WEB services. “LUMIX LINK” is required to connect this cam\
era and your smartphone.
Download “LUMIX LINK” (available free of charge) using the metho\
d below.
STEP
2
Compatible OSes (current as of August 2011)
• 
For Android:  Android2.1, Android2.2, Android2.3
For iPhone:  iOS3, iOS4
The service may not be able to be used properly depending on the type of\
 smartphone being used. For compatible devices, see the following support site.
• 
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
If you are downloading or transferring still pictures and motion picture\
s using your mobile network, you may be subject to high network usage fees under your contract.
• 
For Android:
Connect your Android device to the network.
1. 
Select “Android Market”.
2. 
Enter “LUMIX LINK” into the search box.
3. 
Select “LUMIX LINK” and install it.
4. 
The [ • 
 ] icon will be added to the menu.
For iPhone:
Connect the iPhone to the network.
1. 
Select “App Store”.
2. 
Enter “LUMIX LINK” into the search box.
3. 
Select “LUMIX LINK” and install it.
4. 
The [ • 
 ] icon will be added to the menu.
STEP
1
4
  Touch [Easy Setup].
5
 Touch  [ 
 ] ([Smartphone]).
6
 Touch [Next ].
The 
•  SSID and encryption key  of the camera are 
displayed. Enter the displayed details in the next .
1
  Set the Wi-Fi function to ON 
in the settings menu of the 
smartphone.
For further details, see the instructions of 
• 
your smartphone.
2
  Select the camera 
([FX90-XXXXXX]) from the 
displayed network name 
(SSID) in the Wi-Fi settings.
3
 Input  the encryption key 
displayed on the camera.
4
  Start the smartphone application “LUMIX LINK”.
If you are using the Wi-Fi function for the  fi rst timeEasy connection setup guide Connects*
1 .....................................
 
 Select still pictures or motion pictures, 
and send it*
2 ..................................................
Installation of the smartphone application “LUMIX LINK” is 
• 
required.
Still pictures or motion pictures can also be sent to the WEB 
• 
service via a smartphone. Refer to the “Owner’s Manual for 
advanced features (PDF format)” for details.
Images sent to smartphone
*1 During Playback Mode, select [Easy Setup] to change settings for the  fi rst time only.
*2 To send one still picture or motion picture at a time, select the still \
picture or motion picture during Playback Mode and  press the [Wi-Fi] button.
  To select multiple still pictures or motion pictures and send them, touc\
h [ 
 ] during Playback Mode.
*3 Name will differ depending on the manufacturer.
*4 Setting is only required the  fi rst time using a smartphone or a PC.Wireless access point 
(Broadband router)*
3
Images sent to WEB service
Images sent to PC Images sent to AV device
Easily send still 
pictures or motion 
pictures from your  camera
Digital CameraModel No
. DMC-FX90
VQC8577-1
 Smartphone operations 
 Smartphone operations 
Select [Easy Setup] on the camera
Connect your smartphone and camera
Connection
Setup
Send still pictures or motion pictures from your camera to your smartpho\
ne
Send
Indoors
Send your 
favorite still  pictures or 
motion pictures
Select still picture or motion picture and send one at a time
 

Outdoors
Send your 
favorite still  pictures or 
motion pictures  Connects*
1 ....................................
 
 Register to “LUMIX CLUB”*
1 .........................
-  WEB service user registration*
4 ....................................
 Select still pictures or motion pictures, 
and send it*
2 ..................................................
 Connects*
1 ....................................
 
 Select still pictures or motion pictures, and send it*
2 ..................................................
 Connects*
1 ....................................
 
 Select still pictures or motion pictures, and send it*
2 ..................................................
See the back page
See the back page
See the back page
Send images to services such as Facebook or YouTube.
Send images to Panasonic AV device in your home.
LUMIX LINK
LUMIX LINK
 Camera operations Camera operations
 Smartphone operations 
PASSWORD
Connetion waiting...
LUMIX LINK
Sending multiple still pictures or 
motion picturesTouch [ 
 ].
Refer to 
• 
 on the back page for 
details.
The screen returns to step 
3.
If the screen is not displayed during the sending, reconnect your 
• 
smartphone.
Go to 
.
If still pictures or motion pictures cannot be sent, check “Message 
• 
Display” and “Troubleshooting” on pages 28 to 31 of the “Bas\
ic Owner’s 
Manual”.
Setting is 
only required 
the fi  rst time.
The camera cannot be used to connect to a public wireless LAN 
connection.
The “PHOTOfunSTUDIO 6.4 HD Lite Edition with Wi-Fi” 
• 
software on the CD-ROM (supplied) must be installed.
Download and install the smartphone application “LUMIX LINK”
Preparation
If entering the encryption key takes longer than approximately 4 minutes\
, the 
• 
camera will return to the screen in 
 Step 
5.
A message is displayed on the camera when the connection is complete. To\
uch [OK] twice.
• Exit the menu after it is set. (Touch [ 
• 
 ] several times.)
 Camera operations
4JNQMZ@0QFSBUJPO@9@1@FOHJOEE



4JNQMZ@0QFSBUJPO@9@1@FOHJOEE


 






 
						

							1
 In Playback Mode, touch 
[ 
 ].
2
  Touch the image you want to 
send (repeat).
Touch the same image again to cancel the 
• 
selection.
The page can be changed by touching 
• 
[ 
 ]/[ 
 ].
3
 Touch  [Set].
Still pictures or motion pictures can also be 
• 
sent by dragging selected items upward.
3
  Register your email address.
A registration confi rmation email will be sent to 
• 
the registered email address. Click the URL link 
included within the email.
4
  Select the WEB service you wish to use and register it.
Follow the on-screen instructions to carry out the registration.
• 
Check the “FAQ/Contact us” on the following site for compatible WE\
B services. 
• 
http://lumixclub.panasonic.net/eng/c/
1
  Connect to the “LUMIX CLUB” site.
http://lumixclub.panasonic.net/eng/c/
• 
2
 Enter  the login ID  and 
password you acquired using 
.
Enter the login ID using only numbers.
• 
3
 Check  the login ID , and touch 
[OK].
A message will appear when the connection has 
• 
fi nished. Touch [OK].
Exit the menu after it is set. 
• 
(Touch [ 
 ] several times.)
1
  Read through the “LUMIX CLUB” terms of use and touch [Agree].
You can change the page by dragging the screen left or right.
• 
2
 Enter  a password and touch 
[Set].
Enter any combination of 8 to 16 characters 
• 
and numbers for the password.
2
  Press and hold down the 
WPS button until the wireless 
access point (broadband 
router) goes into WPS mode.
For further details, see the instructions of the 
• 
wireless access point (broadband router).
A message will be displayed on the camera 
• 
when registration of the wireless access 
point (broadband router) is complete.
Touch [OK] or [Next].
Exit the menu after it is set. 
• 
(Touch [ 
 ] several times.)
1
  Touch [WPS (Push-Button)].
If you are using a wireless access point (broadband router) that suppo\
rts the WPS (Wi-Fi Protected Setup) (PUSH button function)*
 

*  WPS is a function that allows connection and security related settings t\
o be changed easily on wireless LAN devices. See the instructions of the wireless access point (broadband router) being use\
d to check if it is 
compatible or not. If you are using a wireless access point (broadband \
router) that does not support WPS (PUSH button function), read through the “Owner’s Manual for advanced features (PDF for\
mat)”.
Connect the camera to a wireless access 
point (broadband router)Acquire a “LUMIX CLUB” login ID and 
password with the camera
Register as a member of the “LUMIX CLUB” (free of charge). Regis\
tration allows still pictures or motion pictures to be sent to multiple WEB services via “LUMIX CLUB”.
Refer to the “Owner’s Manual for advanced features (PDF format)”\
 for details.
Create an account to use in the WEB service (Facebook/YouTube etc.), s\
et aside your login information.
• 
Registering the WEB services being used with LUMIX CLUB means still pict\
ures or motion pictures can be sent to multiple WEB services at once.
When sending images to a [PC]Refer to the “Basic Owner’s Manual” (P27) for further informa\
tion on operating environments or installation. Refer to 
• 
the operating instructions of “PHOTOfunSTUDIO 6.4 HD Lite Edition wit\
h Wi-Fi” (PDF) for further information on the 
save destination of still pictures or motion pictures sent to computers.\
Turn the computer power ON.
• 
Connection
Select multiple still pictures or motion pictures and send them
 
Images saved on the built-in memory cannot be sent. Copy the pictures to\
 a card 
• 
before sending.
Send still pictures or motion pictures from 
your camera to WEB services, AV device or a computer 
 
 
1
  Turn the camera on and 
touch [ 
 ] to set Playback 
Mode.
2
 Touch  [ 
 ] to display the 
menu screen.
3
 Touch  [ 
 ] ([Wi-Fi Setup]).
STEP
1
4
 Touch [Easy Setup].
5
 Touch the icon for the 
destination of the image.
Touch [ • 
 ] ([Web Service]), [ 
 ] ([AV 
device]), or [ 
 ] ([PC]).
When selecting [AV device ], touch [Home].
• 
6
 Touch  [Next].
Follow the on-screen instructions and make 
• 
the settings.
Select [Easy Setup]
Setup
Setup
 Camera operations Camera operations Camera operations
When connecting with [Search Wireless AP]
Touch [Search Wireless AP].
1. 
Touch the wireless access point you are 
2. 
connecting to.
Enter the encryption key and touch [Set].
3. A message is displayed when the wireless access point (broadband router\
) 
• 
has been saved.
Refer to the “Owner’s Manual for advanced features (PDF format)”\
 for details.
• 
When [WEB service] is selected
((
[[
]]
))
You will need your login ID and password to reset. Please be sure to tak\
e a 
• 
note of them.Login ID
PasswordTo ensure reliable connection settings, it is 
• 
recommended to avoid covering the Wi-Fi transmitter 
with your hand, and change settings near the wireless 
access point (broadband router).
WEB service user registration
Register
When [WEB service] is selected
PreparationPreparation Smartphone or 
 PC operations
Login ID
PasswordXXXXXXXXXXXX●●●●●●●●●●●●
XXXXXX@XXXXXemail address
Select still pictures or motion pictures and send them 
from your camera
Send
 Camera operations
4
 
Touch [Send now over Wi-Fi].
5
 Touch the picture destination 
icon and move it to the front.
6
 Touch  [List].
Equipment that can be connected and a 
• 
WEB service list will be displayed.
 When selecting [AV device], touch [Home].
• 
7
  Touch the destination name 
and touch [OK].
When [WEB Service] is selected, multiple 
• 
names can be selected. The selection will be 
cleared by touching the name again.
A message will appear when the image has 
• 
been sent. Touch [OK].
Save the selected pictures you plan to send. Select 
this function to send pictures later, or to use the upload 
tool (LUMIX Image Uploader) to send pictures to WEB 
services.
Setting is 
only required 
the fi  rst time.Setting is 
only required 
the fi rst time.
Setting is 
only required 
the fi rst time.
Wi-Fi Transmitter
Setting is 
only required 
the fi rst time.
Install “PHOTOfunSTUDIO 6.4 HD Lite Edition with Wi-Fi” on the CD-\
ROM (supplied). 
The name of the send 
destination of this computer is 
“Pfs-XXXXXX”.
Send still pictures or motion pictures directly from the camera to compu\
ters without using a 
wireless access point (broadband router)
Select [Manual Setup] in the [Wi-Fi Setup] menu.
1. 
Touch [ 
2. 
 ] ([Smartphone connection]).
Touch [Wireless AP Info].
3. 
Enter the encryption key of this camera into your PC.
4. 
A message is displayed when the connection is complete. Touch [OK].
• 
4JNQMZ@0QFSBUJPO@9@1@FOHJOEE


 4JNQMZ@0QFSBUJPO@9@1@FOHJOEE