Panasonic Dmc Fz150 Owners Manual

							- 131 -
Recording
Applicable modes: 
This prevents the recording of wind-noise automatically.
[OFF]/[AUTO]Note
•
Sound quality may be different than usual when [WIND CUT] is set.•It is fixed to [OFF] in the following cases.–In [MINIATURE EFFECT] in Creative Control Mode–In [HIGH SPEED VIDEO] in Scene Mode–When the [ZOOM MIC] is set to [ON]
Applicable modes: 
Coupled to the zoom operation, it will clearly record far sounds with tele, and surrounding 
sounds with wide.
[OFF]/[ON]
Note
•
When set to [ON] and performing zoom, the operation sound may be recorded enhanced in 
accordance with the surrounding sounds. Also, audio recording level will  be lower compared to 
when [OFF].
•The stereo effect of the audio is reduced when the picture is enlarged.•It is fixed to [OFF] in the following cases.–In [MINIATURE EFFECT] in Creative Control Mode–In [HIGH SPEED VIDEO] in Scene Mode
[WIND CUT]
[ZOOM MIC] 
						

							Playback/Editing
- 132 -
Playback/EditingPlaying Back Burst Pictures
∫About the burst picture group
Pictures taken with burst 
speed set to [ ] or [ ] are recorded as 
a single burst picture group.
The burst icon [
˜]  A  will be displayed for the burst picture group.
•
Deleting and editing in a group unit is possible. (For example, if you 
delete a burst picture group with [ ˜], all the pictures in that group are 
deleted.)
Note
•Burst pictures recorded after the number of burst pictures has exceeded 50000 will not be 
grouped.
•Burst pictures recorded on other cameras may not be recognized as a burst picture group. •Burst pictures will not be grouped if recorded without setting the clock.•If you delete all pictures except  one, that picture will be saved as a single picture instead of as 
a burst picture group.
A4060 
						

							- 133 -
Playback/Editing
Press 2/1  to select a picture with a burst icon [ ˜], and then press 3 .
∫ Operations when continuously playing back the burst picture group
The cursor displayed during playback is the same as  3/4 /2/ 1.
¢ These operations can be performed only in the Pause Mode.
1Select a picture with a burst icon [ ˜], and then press  4.2Press  2/1  to select the picture.
•Press 4 again to return to the normal playback screen.•The same playback controls used for normal pictures can be used for pictures within the 
burst picture group. (Such as Multi Playback, Playback Zoom and deleting images)
•The following editing menu can be used.–[UPLOAD SET]/[TITLE EDIT]/[TEXT STAMP]/[RESIZE]/[CROPPING]¢/[LEVELING]¢/
[ROTATE DISP.]/[FAVORITE]/[PRINT SET]/[PROTECT]/[COPY]
¢  Cannot be used for the entire burst picture group.
Continuously playing back burst pictures
3
Play/Pause
4Stop
2Fast rewind, Previous picture¢
1Fast forward, Next picture¢
Playing back each burst picture 
						

							Playback/Editing
- 134 -
Editing Burst Pictures
1Press [MENU/SET] during playback to display the [PLAYBACK] Mode menu. 
(P48)
2Press 3/4  to select item, and press  1.3Select [SINGLE] or [MULTI] and then press [MENU/SET].
4Select an image with burst icon [ ˜], and perform editing.
1Select a picture with a burst icon [ ˜], and then press  4.2Press [MENU/SET] to display the [PLAYBACK] Mode menu.3Press  3/4  to select item, and press  1.
4Select [SINGLE] or [MULTI] and then press [MENU/SET].5Select the picture, and perform editing.
∫ About display of [FAVORITE], [PRINT SET] and [PROTECT] icons during playback 
of burst picture groups
By setting [FAVORITE]  (P150), [PRINT SET]  (P151), or [PROTECT]  (P153) setting to a 
picture in the Burst Picture Group, number of settings (number of settings and total 
number when [PRINT SET] is set) is displayed on the icon for the first picture of each 
group.
Note
•
For details on the various ways of editing, refer to “Using the [PLAYBACK] Mode Menu”. (P140)•Pictures for which you have performed [TEXT STAMP], [RESIZE], [CROPPING] or 
[LEVELING] will be saved separately from burst pictures.
Editing in burst picture group units (All pictures in the burst picture group)
Editing single pictures within a burst picture group
Initial screen for burst  picture group 
(first burst picture)[FAVORITE][PRINT SET][PROTECT]
A Total number of all pictures stored within the burst picture group.
B Number of pictures in given burst picture group subject to a setting.
C Total number of prints set over all burst picture groups.
•For example, if 3 pictures are to be printed  from each of 2 burst pictures within the group, 
a 6 will appear here.
ABCBB 
						

							- 135 -
Playback/Editing
Various methods to play back
You can play back the recorded pictures in various methods.
Press [MENU/SET] during playback.
Press 1.
Press  3/4 to select the item and then press [MENU/SET].
•Following items can be selected.
¢ The playback method for the 3D pictures can be switched. This menu is only 
displayed during HDMI output. Refer to  P160 for details about the playback 
method.
 [2D/3D SETTINGS]¢ [MODE PLAY]  (P139)
 [NORMAL PLAY]  (P39)  [CATEGORY PLAY] (P139)
 [SLIDE SHOW]  (P136)  [FAVORITE PLAY] (P139) 
						

							Playback/Editing
- 136 -
You can play back the pictures you have taken in synchronisation with music, and you can 
do this in sequence while leaving a fixed interval between each of the pictures.
You can also put together a slide show co mposed of only still pictures, only motion 
pictures, only 3D pictures etc.
We recommend this feature when you view your  pictures by connecting the camera to a 
TV.
[SLIDE SHOW]
Select the group to play back by pressing  3/4, 
and then press [MENU/SET].
•Refer to  P160 for the method to play back [3D PLAY] pictures in 
3D.
•During [CATEGORY SELECTION], press  3/4/2/1 to select 
a category, and then press [MENU/SET]. Refer to  P139 for 
category details.
Press  3 to select [START] and then press [MENU/SET].
Press  4 to finish the slide show.
•Normal playback resumes after the slide show finishes. 
						

							- 137 -
Playback/Editing
∫Operations performed during slide show
The cursor displayed during playback is the same as  3/4 /2/ 1.
¢ These operations can be performed only in the Pause Mode, during Motion Picture and 
Burst Picture Group playback.
3Play/Pause
4Stop
2Back to previous picture¢
1Ahead to next picture¢
[W]Reduce volume level
[T]Increase volume levelWT 
						

							Playback/Editing
- 138 -
∫Changing the slide show settings
You can change the settings for slide show playback by selecting [EFFECT] or [SETUP] 
on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects when switching from one picture to the next.
[NATURAL], [SLOW], [SWING], [URBAN], [OFF], [AUTO]
•
When [URBAN] has been selected, the picture may appear in black and white as a screen 
effect.
•[AUTO] can be used only when [CATEGORY SELECTION] has been selected. The pictures 
are played back with the recommended effects in each category.
•[EFFECT] is fixed to [OFF] during the [VIDEO ON LY] slide show, or during a slide show of 
[ ] in [CATEGORY SELECTION].
•Even if [EFFECT] is set, it does not work during a slide show of burst picture group.•Some [EFFECT] will not operate when playing back pictures displayed vertically.
[SETUP]
[DURATION] or [REPEAT] can be set.
•
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.•Even if [DURATION] is set, it does not work du ring a slide show of motion pictures or slide 
show of burst picture group.
•[OUTPUT] will only appear when set to HDMI output and [3D PLAYBACK]  (P60) is set to [ ].
ItemSettings
[DURATION] [1 SEC.]/[2 SEC.]/[3 SEC.]/[5 SEC.]
[REPEAT] [OFF]/[ON]
[SOUND] [OFF]: There will be no sound.
[AUTO]: Music is played when the still pictures are played 
back, and audio is played when the motion pictures 
are played back.
[MUSIC]: Music is played back.
[AUDIO]: Audio (only for motion pictures) is played back.
[OUTPUT] [ ]: The slide show is output in normal format.
[ ]: The slide show is output in 3D. 
						

							- 139 -
Playback/Editing
Pictures are classified into only still pictures, only motion pictures, or only 3D pictures, and 
played back.
Press  3/4 to select the item and then press [MENU/
SET].
•Refer to P160 for the method to play back [3D PLAY] pictures in 3D.
This mode allows you to search images by  Scene Mode or other categories (such as 
[PORTRAIT], [SCENERY] or [NIGHT SCENERY]) and sort the pictures into each of the 
categories. You can then play back the pictures in each category.
Press  3/4/2/ 1 to select the category and then press 
[MENU/SET] to set.
•If a picture is found in a category, the category icon turns blue.•Pictures are sorted into the categories shown below.
¢ Press  3/4 /2/ 1 to select the person to play back and then press [MENU/SET].
The whole group with pictures taken with burst settings [ ] and [ ] will be treated as 
face recognition pictures.
You can play back the pictures you have set as [FAVORITE]  (P150).
[MODE PLAY]
[CATEGORY PLAY]
Recording information e.g. Scene Modes
[FACE RECOG.]¢
*[PORTRAIT] Mode, [i-PORTRAIT], [NIGHT PORTRAIT], [i-NIGHT PORTRAIT], 
[BABY1]/[BABY2], [i-BABY]
,[SCENERY] Mode, [i-SCENERY], [SUNSET], [i-SUNSET], [AERIAL PHOTO]
.[NIGHT PORTRAIT] Mode, [i-NIGHT PORTRAIT], [i-NIGHT SCENERY], 
[iHANDHELD NITE], [STARRY SKY]
[SPORTS] Mode, [PARTY], [CANDLE LIGHT], [PANNING], [FIREWORKS], [BEACH], 
[SNOW], [AERIAL PHOTO]
Î[BABY1]/[BABY2], [i-BABY]
í[PET]
1[FOOD]
[TRAVEL DATE]
Pictures taken with burst speed set to [ ] or [ ]
[FAVORITE PLAY]
4060
4060 
						

							Playback/Editing
- 140 -
Using the [PLAYBACK] Mode Menu
You can setup pictures to be uploaded to image sharing sites and perform editing like 
cropping recorded pictures, as well as set up the protection of recorded images, etc.
•
With [TEXT STAMP], [RESIZE], [CROPPING] or [L EVELING], a new edited picture is created. 
A new picture cannot be created if there is no free space on the built-in memory or the card so 
we recommend checking that there is free space and then editing the picture.
You can display pictures by recording date.
Note
•
The recording date of the picture selected in the playback screen becomes the date selected 
when the calendar screen is first displayed.
•If there are multiple pictures with the same recording date, the first picture recorded on that day 
is displayed.
•You can display the calendar between January 2000 and December 2099.•If the date is not set in the camera, the recording date is set as January 1st, 2011.•If you take pictures after setting the travel destination in [WORLD TIME], the pictures are 
displayed by the dates at the travel destination in calendar playback.
[CALENDAR]
Select [CALENDAR] on the [PLAYBACK] Mode menu.  (P48)
Press  3/4/2/ 1 to select the date to be played 
back.
•If there were no pictures recorded during a month, the month is 
not displayed.
Press [MENU/SET] to display the pictures that 
were recorded on the selected date.
•Press [ ‚] to return to the calendar screen.