Panasonic Dmc Fz28 Operating Instructions Manual

							101VQT1S36
Advanced (Playback)
Press 3/4/ 2/1 to select text and then press 
[MENU/SET] to register.
Press [DISPLAY] to switch text between [A] (capitals), [a] (small 
case) and [&/1] (special characters and numbers).
The cursor at the entry position can be moved to the left with 
[ L ], and to the right with [ Z].
To enter a blank, move the cursor to [SPACE] or to delete an entered character, move 
the cursor to [DELETE], and press [MENU/SET].
To stop editing at any time during text entry, press [ ‚].A maximum of 30 characters can be entered.
Press  3/4/ 2/1 to move the cursor to [EXIT] and then press [MENU/
SET] to end text input.
Press [ ‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is selected.Press [MENU/SET] to close the menu.
∫ Delete the title 
[SINGLE] setting
1 In step 
4 when [SINGLE]  (P101) is selected, delete all the texts, select [EXIT], 
and press [MENU/SET].
2 Press [ ‚].
3 Press [MENU/SET] to close the menu.
[MULTI] setting
1 In step 
4, delete all the texts, select [EXIT], and press [MENU/SET].
2 Press [MENU/SET] to close the menu.
Note

Text can be scrolled if all of the registered text does not fit on the screen.The name setting of [BABY1]/[BABY2] or [PET] in scene mode or [LOCATION] in travel date 
can also be registered by using the operation in steps 4 and following.The name setting of [BABY1]/[BABY2] or [PET] in scene mode, [LOCATION] in travel date and 
[TITLE EDIT] cannot be registered at the same time.
You can print out texts (comments) using the “PHOTOfunSTUDIO-viewer-” bundled software 
on the CD-ROM (supplied).
You can set up to 50 pictures at one time with [MULTI].You cannot use titles edit for pictures taken with other equipment.
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictu res with a picture size larger than [ ] will be 
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] mode menu.  (P22)
 [TEXT STAMP]
DMC-FZ28P_PC.book  101 ページ  ２００８年７月２日　水曜日　午後１１時１４分 
						

							VQT1S36102
Advanced (Playback)
Press 3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Press  3/4/2/1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE] 
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[AGE]  (P68)
If this is set to [ON], [AGE] is stamped on the pictures.
[TRAVEL DATE]
If this is set to [ON], [TRAVEL DATE] is stamped on the pictures.
[TITLE]
Text is printed together with the image fo r pictures that have already been recorded 
with text in [BABY1]/[BABY2] or [PET] name settings in scene mode, [LOCATION] 
in travel date or [TITLE EDIT].
Press [MENU/SET].
If you set [TEXT STAMP] for a picture with  a picture size larger than [ ], the picture 
size will become smaller as shown below.
The picture becomes slightly rougher.
Press 3 to select [YES] and then press [MENU/
SET].
The message [SAVE NEW PICTURES?] appears if the picture 
was recorded with a picture size [ ] or less.
Select the picture, and then 
press [MENU/SET] to set.
[ ‘ ] appears on screen if the picture is 
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), 
and then press [MENU/SET] to set.

The setting is canceled when 
[DISPLAY] is pressed again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2/ 1 to 
select the pictures.
[W/OTIME] : Stamp the year, month and date.
[WITHTIME] : Stamp the year, month, day, hour and minutes.
Aspect ratio settingPicture size
X
 //> 
Y // > 
W // > 
DMC-FZ28P_PC.book  102 ページ  ２００８年７月２日　水曜日　午後１１時１４分 
						

							103VQT1S36
Advanced (Playback)
Press [‚] to return to the menu screen.¢
¢ The menu screen is automatically restored when [MULTI] is selected.Press [MENU/SET] to close the menu.
Note
When you print pictures stamped with text, the dat e will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
You can set up to 50 pictures at one time in [MULTI].Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
When text is stamped onto the [ ] pictures, it is difficult to read it.Text and dates cannot be stamped on the pictures taken with other equipment.
We recommend resizing to [ ] if you want to attach a picture to an e-mail or use it on a 
website. (Pictures set to the minimum number of pixels for [ASPECT RATIO] cannot be 
further reduced in size.)
Select [RESIZE] on the [PLAYBACK] mode menu.  (P22)
Q [RESIZE] Reducing the picture size (number of pixels)
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture and size.
[SINGLE] setting
1 Press  2/1 to select the picture, and 
then press [MENU/SET].
2 Press  2/1 to select the size
¢, and then 
press [MENU/SET].
¢ Only the sizes to which the pictures can be 
resized is displayed.
[SINGLE]
[MULTI] setting
1 Press  3/4 to select the size, and then 
press [MENU/SET].

When [DISPLAY] is pressed, an explanation 
of resizing is displayed.
2 Press  3/4/2 /1  to select the picture, 
and then press [DISPLAY].

Repeat this step for each picture, and press 
[MENU/SET] to set.
[MULTI]
DMC-FZ28P_PC.book  103 ページ  ２００８年７月２日　水曜日　午後１１時１４分 
						

							VQT1S36104
Advanced (Playback)
Press 3 to select [YES] and then press [MENU/
SET].
Press [‚] to return to the menu screen.
¢
¢ The menu screen is automatically restored when [MULTI] is 
selected.
Press [MENU/SET] to close the menu.
Note
You can set up to 50 pictures at one time in [MULTI].The picture quality of the resized picture will deteriorate.It may not be possible to resize pictures recorded with other equipment.
You can enlarge and then clip the important part of the recorded picture.
Select [TRIMMING] on the [PLAYBACK] mode menu.  (P22)
Press [MENU/SET].
Press 3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
 [TRIMMING]
Press 2/ 1 to select the picture, and then press 
[MENU/SET].
Use the zoom lever and press 
3/ 4/2/1 to select the parts 
to be trimmed.
Zoom lever (T): Enlargement
Zoom lever (W): Reduction
3 /4 /2/ 1: Move Reduction Enlargement
()
Move the position
()
WT
DMC-FZ28P_PC.book  104 ページ  ２００８年７月２日　水曜日　午後１１時１４分 
						

							105VQT1S36
Advanced (Playback)
Note
Depending on the cut size, the picture size of the trimmed picture may become smaller than 
that of the original picture.
The picture quality of the trimmed picture will deteriorate.It may not be possible to trim pictures recorded with other equipment.
Minute tilting of the image can be adjusted.
Select [LEVELING] on the [PLAYBACK] mode menu.  (P22)
Press  2/1 to select the picture, and then press [MENU/SET].
Press  2/1 to adjust the tilting, and press [MENU/
SET].
1: clockwise
2: counterclockwise

Up to 2 o can be adjusted.
Press  3 to select [YES] and then press [MENU/
SET].
Press [ ‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
Note
Quality of image may become coar se when levelling is performed. Recorded pixels may decrease compared to original image when levelling is performed.Levelling may not be performed on images recorded with other equipment.
You can convert pictures taken with a [ W] aspect ratio to a [ Y] or a [ X] aspect ratio.
Select [ASPECT CONV.] on the [PLAYBACK] mode menu.  (P22)
 [LEVELING]
?  [ASPECT CONV.]
Press  3/4 to select [ Y] or [ X] and then press 
[MENU/SET].
Press  2/1 to select a picture taken with [ W] 
aspect ratio, and then press [MENU/SET].
DMC-FZ28P_PC.book  105 ページ  ２００８年７月２日　水曜日　午後１１時１４分 
						

							VQT1S36106
Advanced (Playback)
Press [‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
Note
After converting the aspect ratio, the picture size may become larger than that of the original 
picture.
You may not be able to convert pictures taken on other equipment.
This mode allows you to automatically display pictures vertically if they were recorded 
holding the camera vertically or rotate pictures manually in 90o steps.
Select [ROTATE] on the [PLAYBACK] mode menu.  (P22)
The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
Press 2/1 to select the picture and then press 
[MENU/SET].
Motion pictures and protected pictures cannot be rotated.
Press 3/ 4 to select the direction to rotate the 
picture and then press [MENU/SET].
Press [ ‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
Press 2/ 1 to determine the horizontal position, 
and press [MENU/SET] to set.
Use  3/4 to set the frame position for pictures rotated vertically.
Press 3 to select [YES] and then press [MENU/
SET].
N  [ROTATE]/ M [ROTATE DISP.]
Rotate (The picture is rotated manually)
: The picture rotates clockwise in steps of 90 o.
: The picture rotates counter-clockwise in steps of 90 o.
DMC-FZ28P_PC.book  106 ページ  ２００８年７月２日　水曜日　午後１１時１４分 
						

							107VQT1S36
Advanced (Playback)
Select [ROTATE DISP.] on the [PLAYBACK] mode menu. (P22)
Note
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless 
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows 
recording information etc. to be added. It was established by “JEITA (Japan Electronics and 
Information Technology Industries Association)”.
It may not be possible to rotate pictures that have been recorded with other equipment.
You can do the following if a mark has been added to pictures and they have been set as 
favorites.

Play back only the pictures set as favorites. ([FAVORITE PLAY])Play back the pictures set as favorites only as a slide show.Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT Ü])
Select [FAVORITE] on the [PLAYBACK] mode menu.  (P22)
∫Canceling all the [FAVORITE] settings
1 Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].
2 Press  3 to select [YES] and then press [MENU/SET].
3 Press [MENU/SET] to close the menu.

You cannot select [CANCEL] if not even one picture has been set as a favorite.
Note
You can set up to 999 pictures as favorites.
Rotate display (The picture is automatically rotated and displayed)
Press  4 to select [ON] and then press [MENU/SET].
The pictures are displayed without being rotated when you select 
[OFF].
Refer to P40  for information about how to play back pictures.
Press [MENU/SET] to close the menu.
Ü [FAVORITE]
Press  4 to select [ON] and then press [MENU/SET].
You cannot set pictures as favorites if [FAVORITE] is set to 
[OFF]. Also [ Ü] will not appear when [FAVORITE] is set to [OFF] 
even if it was previously set to [ON].
Press [MENU/SET] to close the menu.
Press  2/1 to select the picture and then press  4.
Repeat the above procedure.If 4  is pressed again, the favorite setting is canceled.
DMC-FZ28P_PC.book  107 ページ  ２００８年７月２日　水曜日　午後１１時１４分 
						

							VQT1S36108
Advanced (Playback)
When printing pictures at a photo printing store, [ALL DELETE EXCEPTÜ] (P43)  is useful so 
only the pictures you want to be printed remain on the card.
You may not be able to set pictures taken with other equipment as favorites.You can perform, check and cancel the settings of images as favorites using the “PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied).
DPOF “Digital Print Order Format” is a system t hat allows the user to select which pictures 
to print, how many copies of each picture to print and whether or not to print the recording 
date on the pictures when using a DPOF compat ible photo printer or photo printing store. 
For details, ask at your photo printing store.
When you want to use a photo printing store to print pictures recorded on the built-in 
memory, copy them to a card  (P110) and then set the DPOF setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Select [DPOF PRINT] on the [PLAYBACK] mode menu.  (P22)
Press 3/ 4 to set the number of prints, and then press [MENU/SET] 
to set.
When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
Press [ ‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
∫ Canceling all the [DPOF PRINT] settings
1 Select [CANCEL] on the screen shown in step 
2 and then press [MENU/SET].
2 Press  3 to select [YES] and then press [MENU/SET].
3 Press [MENU/SET] to close the menu.

You cannot select [CANCEL] if not even one picture has been set for DPOF printing.
O  [DPOF PRINT]
Press 3/ 4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then press 
[MENU/SET].
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/ 2/1 
to select the 
pictures.
DMC-FZ28P_PC.book  108 ページ  ２００８年７月２日　水曜日　午後１１時１４分 
						

							109VQT1S36
Advanced (Playback)
∫To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing 
[DISPLAY].

When you go to a photo printing store for digital printing, be sure to order the printing of the 
date additionally if required.
Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
The date cannot be printed on pictures stamped with text.
Note
The number of prints can be set from 0 to 999.With a printer supporting PictBridge, the date print settings of the printer may take precedence 
so check if this is the case.
It may not be possible to use the DPOF print settings with other equipment. In this case, cancel 
all the settings, and reset the settings.
If the file is not based on the DCF standard, the DPOF print setting cannot be set.
You can set protection for pictures y ou do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu.  (P22)
Press [ ‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
∫ Canceling all the [PROTECT] settings
1 Select [CANCEL] on the screen shown in step 
2 and then press [MENU/SET].
2 Press  3 to select [YES] and then press [MENU/SET].
3 Press [MENU/SET] to close the menu.

If you press [MENU/SET] while canceling protection, the canceling will stop halfway.
P  [PROTECT]
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then press 
[MENU/SET].
When [MULTI] has been selected
Repeat these steps for each picture.The settings are canceled when [MENU/
SET] is pressed again.
[SINGLE] [MULTI]
Press  2/1 to 
select the picture. Press 
3/4 /2 /1  
to select the 
pictures.
DMC-FZ28P_PC.book  109 ページ  ２００８年７月２日　水曜日　午後１１時１４分 
						

							VQT1S36110
Advanced (Playback)
Note
The protect setting may not be effective on other equipment.Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in 
memory or the card is formatted.
Even if you do not protect pictures on an SD  Memory Card or an SDHC Memory Card, they 
cannot be deleted when the card’s Write-Protect switch is set to [LOCK].
You can add the audio after taking a picture.
Select [AUDIO DUB.] on the [PLAYBACK] mode menu.  (P22)
Note
Audio dubbing may not work properly on pictures recorded by other equipment.
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] mode menu.  (P22)
Press  3/4 to select the copy destination and then 
press [MENU/SET].
B  [AUDIO DUB.]
Press 2/ 1 to select the picture and then press 
[MENU/SET] to start audio recording.
The message [OVERWRITE AUDIO DATA?] screen appears 
when audio has already been recorded. Press  3 to select [YES] 
and then press [MENU/SET] to start audio recording. (The 
original audio is overwritten.)
Audio is recorded from the built-in microphone on the camera.If you press [ ‚], the audio dubbing is canceled.
Press [MENU/SET] to stop recording.
It will automatically stop after recording about 10 seconds without 
pressing [MENU/SET].
Press [ ‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
S  [COPY]
: All the picture data in the built-in memory are copied 
onto the card at one time.  > step 4.
: One picture at a time is copied from the card to the  built-in memory.  > step 
3.
DMC-FZ28P_PC.book  110 ページ  ２００８年７月２日　水曜日　午後１１時１４分