Home > Panasonic > Digital Camera > Panasonic Dmc Fz40 Basic Operating Instructions Manual

Panasonic Dmc Fz40 Basic Operating Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Dmc Fz40 Basic Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							11(ENG) VQT2X16
    30 Speaker
    31 Lens barrel
    32 Release lever
    33 Tripod receptacle
    •When you use a tripod, make sure the tripod 
    is stable when the camera is attached to it.
    34 Card/Battery door 
    35 DC coupler cover
    •When using an AC adaptor, ensure that 
    the Panasonic DC coupler (DMW-DCC6; 
    optional) and AC adaptor (DMW-AC8PP; 
    optional) are used.
    •Always use a genuine Panasonic AC 
    adaptor (DMW-AC8PP; optional).
    •We recommend you use a battery with 
    sufficient battery power or the AC adaptor 
    when recording motion pictures.
    •If while recording motion pictures using the 
    AC adaptor and the power supply is cut off 
    due to a power outage or if the AC adaptor 
    is disconnected etc., the motion picture 
    being recorded will not be recorded.
    DMC-FZ45&40_P-VQT2X16_eng.book  11 ページ  2010年7月2日 金曜日 午後4時10分 
    						
    							VQT2X16 (ENG)12
    P reparationCharging the Battery
    ∫About batteries that you can use with this unitThe battery that can be used with this unit is DMW-BMB9PP.
    •Use the dedicated charger and battery.•The camera has a function for distinguishing batteries which can be used 
    safely. The dedicated battery (DMW-BMB9PP) supports this function. The 
    only batteries suitable for use with this unit are genuine Panasonic 
    products and batteries manufactured by other companies and certified by 
    Panasonic. (Batteries which do not support this function cannot be used). 
    Panasonic cannot in any way guarantee the quality, performance or safety 
    of batteries which have been manufactured by other companies and are 
    not genuine Panasonic products.
    ∫Charging
    •The battery is not charged when the camera is shipped. Charge the battery 
    before use.
    •Charge the battery with the charger indoors.•It is recommended to charge the  battery in a temperature between 
    10oC to 30oC (50oF to 86oF). (The battery temperature should also be the same.)
    It has been found that counterfeit battery packs which look very similar 
    to the genuine product are made available to purchase in some markets. 
    Some of these battery packs are not adequately protected with internal 
    protection to meet the requirements of appropriate safety standards. 
    There is a possibility that these battery packs may lead to fire or 
    explosion. Please be advised that we are not liable for any accident or 
    failure occurring as a result of use of a counterfeit battery pack. To 
    ensure that safe products are used we would recommend that a genuine 
    Panasonic battery pack is used.
    Attach the battery paying 
    attention to the direction of the 
    battery.
    DMC-FZ45&40_P-VQT2X16_eng.book  12 ページ  2010年7月2日 金曜日 午後4時10分 
    						
    							13(ENG) VQT2X16
    ∫ About the [CHARGE] indicator
    •
    When the [CHARGE] indicator flashes–The batt ery t emperature is too high or too low. It is recommended to charge the 
    battery again in an ambient temperature of  between 10 ºC to 30 ºC (50oF to 86oF).–The terminals of the charger or the battery are dirty. In this case, wipe them 
    with a dry cloth.
    Connect the charger to the 
    electrical outlet.
    •Disconnect the charger from the 
    electrical socket and detach the battery 
    after charging is completed.
    The [CHARGE] 
    indicator turns on: The [CHARGE] indicator A is turned on and charging 
    will start.
    The [CHARGE] 
    indicator turns off: The [CHARGE] indicator A of the charger will turn off 
    once the charging has completed without any problem.90°
    DMC-FZ45&40_P-VQT2X16_eng.book  13 ページ  2010年7月2日 金曜日 午後4時10分 
    						
    							VQT2X16 (ENG)14
    ∫Charging
    ∫ Recording still pictures (When using the LCD monitor/Viewfinder)
    Recording conditions by CIPA standard•CIPA is an abbreviation of [Camera & Imaging Products Association].•Temperature: 23 oC (73.4oF)/Humidity: 50%RH when LCD monitor is on.•Using a Panasonic SD Memory Card (32 MB).•Using the supplied battery.•Starting recording 30 seconds after the camera is turned on. (When the Optical 
    Image Stabilizer Function is set to [AUTO].)
    •Recording once every 30 seconds  with full flash every second recording.•Rotating the zoom lever from Tele to Wide or vice versa in every recording.•Turning the camera off every 10 recordings and leaving it until the temperature 
    of the battery decreases.
    ∫Playback (When using the LCD monitor/Viewfinder)
    Charging time Approx. 155 min
    Number of recordable 
    pictures Approx. 580 pictures
    (By CIPA standard in 
    Program AE Mode)
    Recording time Approx. 290 min
    Playback time Approx. 540 min
    DMC-FZ45&40_P-VQT2X16_eng.book  14 ページ  2010年7月2日 金曜日 午後4時10分 
    						
    							15(ENG) VQT2X16
    About the Built-in Memory/the Card
    •Memory size: Approx. 40 MB•The built-in memory can be used as a temporary storage device when the card 
    being used becomes full.
    •The access time for the built-in memory may be longer than the access time for 
    a card.
    The following cards which conform to the SD video standard can be used with this 
    unit.
    (These cards are indicated as card  in the text.)
    •Only cards bearing the SDHC logo (indicating that the card conforms to SD 
    video standards) may be used as 4 GB to 32 GB cards.
    •Only cards bearing the SDXC logo (indicating that the card conforms to SD 
    video standards) may be used as 48 GB, 64 GB cards.
    •Use a card with SD Speed Class¢ with “Class 4” or higher when recording 
    motion pictures in [AVCHD Lite]. Also, use a card with SD Speed Class with 
    “Class 6” or higher when recording motion pictures in [MOTION JPEG].
    ¢ SD Speed Class is the speed standard regarding continuous writing.
    •Please confirm the latest information on the following website.
    http://panasonic.jp/support/global/cs/dsc/
    (This Site is English only.)
    Note
    •Keep the Memory Card out of reach of children to prevent swallowing.
    Built-in Memory
    Card
    Type of card which can be  used with this unitRemarks
    SD Memory Card 
    (8 MB to 2 GB)•SDHC Memory Card can be used with SDHC 
    Memory Card or SDXC Memory Card 
    compatible equipment.
    •SDXC Memory Card can only be used with 
    SDXC Memory Card compatible equipment.
    •Check that the PC and other equipment are 
    compatible when using the SDXC Memory 
    Cards.
    http://panasonic.net/avc/sdcard/
    information/SDXC.h tml
    SDHC Memory Card 
    (4 GB to 32 GB)
    SDXC Memory Card 
    (48 GB, 64 GB)
    DMC-FZ45&40_P-VQT2X16_eng.book  15 ページ  2010年7月2日 金曜日 午後4時10分 
    						
    							VQT2X16 (ENG)16
    Inserting and Removing the Card 
    (optional)/the Battery
    •Turn the power switch to [OFF] and confirm that the lens barrel is retracted.•Close the flash.•We recommend using a Panasonic card.
    Slide the release lever in the 
    direction of the arrow and open 
    the card/battery door.
    •Always use genuine Panasonic 
    batteries (DMW-BMB9PP).
    •If you use other batteries, we cannot 
    guarantee the quality of this product.
    Battery: Insert until it is locked by 
    the lever A being careful about 
    the direction you insert it. Pull the 
    lever A in the direction of the 
    arrow to remove the battery.
    Card: Push it fully until it clicks 
    being careful about the direction 
    you insert it. To remove the card, 
    push the card until it clicks, then 
    pull the card out upright.
    B : Do not touch the connection terminals of 
    the card.
    •The card may be damaged if it is not fully 
    inserted.
    1 :Close the card/battery door.
    2 :Slide the release lever in the 
    direction of the arrow.
    LOCKOPEN
    B
    LOCKOPEN
    DMC-FZ45&40_P-VQT2X16_eng.book  16 ページ  2010年7月2日 金曜日 午後4時10分 
    						
    							17(ENG) VQT2X16
    Setting Date/Time (Clock Set)
    •The clock is not set when the camera is shipped.
    Turn the camera on.
    A[MENU/SET] button
    B Cursor buttons
    •The lens barrel extends.
    Press [MENU/SET].
    Press  2/1 to select the items 
    (year, month, day, hour, minute, 
    display sequence or time display 
    format), and press  3/4 to set.
    •You can cancel without setting the clock by pressing [ ‚].
    Press [MENU/SET] to set.
    Press [MENU/SET].
    •Press [‚] to return to the settings screen.
    Select [CLOCK SET] in the [REC] or [SETUP] menu, and press  1.
    •It can be changed in steps 3 and 4 to set the clock.
    Changing the clock setting
    VQT2X16~Body1_eng.fm  17 ページ  2010年7月7日 水曜日 午後4時47分 
    						
    							VQT2X16 (ENG)18
    Setting the Menu
    This section describes how to select the Program AE Mode settings, and the 
    same setting can be used for the [MOTION PICTURE] menu, [PLAYBACK] menu 
    and [SETUP] menu as well.
    Example: Setting [AF MODE] from [Ø] to [ š] in the Program AE Mode.
    Press [MENU/SET] to close the menu. Press [MENU/SET] to display the menu.
    Press  3
    /4 to select [AF MODE], and then 
    press  1.
    •Depending on the item, its setting may not appear or 
    it may be displayed in a different way.
    Press  3/4 to select [ š] and then press 
    [MENU/SET] to set.
    Switching to other menus
    e.g.: Switching to the [SETUP] menu
    1Press [MENU/SET] to display the menu.2Press  2.
    3Press 4 to select the [SETUP] menu icon 
    [].
    4Press  1.
    •Select a menu item next and set it.
    DMC-FZ45&40_P-VQT2X16_eng.book  18 ページ  2010年7月2日 金曜日 午後4時10分 
    						
    							19(ENG) VQT2X16
    Mode switching
    B asicSelecting the [REC] Mode
    Turn the camera on.
    •The power lamp 2 lights when you turn this 
    unit on  1.
    Switching the mode by rotating the 
    mode dial.
    Align a desired mode with part  A.•Rotate the mode dial slowly and surely to 
    adjust to each mode. (The mode dial 
    rotates 360 o)
    ∫Basic
    Intelligent Auto Mode
    The subjects are recorded using settings automatically selected by the 
    camera.
    Program AE Mode
    The subjects are recorded using your own settings.
    CUSTM
    CUSTM
    DMC-FZ45&40_P-VQT2X16_eng.book  19 ページ  2010年7月2日 金曜日 午後4時10分 
    						
    							VQT2X16 (ENG)20
    ∫Advanced
    ∫ Advanced Scene Mode
    Aperture-Priority AE Mode
    The shutter speed is automatically determined by the aperture value you set.
    Shutter-Priority AE Mode
    The aperture value is automatically determined by the shutter speed you set.
    Manual Exposure Mode
    The exposure is adjusted by the aperture value and the shutter speed which 
    are manually adjusted.
    Creative Motion Picture Mode
    Record motion picture with manual settings.
    Custom Mode
    Use this mode to take pictures with previously registered settings.
    Scene Mode
    This allows you to take pictures that match the scene being recorded.
    My Color Mode
    Use this mode to check coloring effects, select a color mode from among 
    twelve color modes, and then take pictures.
    Portrait Mode
    Use this mode to take pictures of people.
    Scenery Mode
    Use this mode to take pictures of scenery.
    Sports Mode
    Use this mode to take pictures of sporting events, etc.
    Close-up Mode
    Use this mode to take close-up pictures of a subject.
    Night Portrait Mode
    Use this mode to take pictures of night scenes and people against night time 
    scenery.
    DMC-FZ45&40_P-VQT2X16_eng.book  20 ページ  2010年7月8日 木曜日 午後8時10分 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Dmc Fz40 Basic Operating Instructions Manual