Panasonic Dmc Fz40 Operating Instructions Manual

							- 161 -
Advanced (Playback)
You can enlarge and then crop the important part of the recorded picture.
Select [CROPPING] on the [PLAYBACK] Mode menu. (P27)
Press [MENU/SET].
  [CROPPING]
Press  2/1 to select the picture, and then press 
[MENU/SET].
Use the zoom lever and 
press  3/4/ 2/1 to 
select the parts to be 
cropped.
Zoom lever (T): Enlargement
Zoom lever (W): Reduction
3 /4 /2 /1: Move Reduction
Enlargement
()
Move the position
()
WT 
						

							Advanced (Playback)
- 162 -
Press 3 to select [YES] and then press [MENU/
SET].
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Depending on the cut size, the picture size of the cropped picture may become smaller than 
that of the original picture.
•The picture quality of the cropped picture will deteriorate.•It may not be possible to crop pictures recorded with other equipment.•Motion pictures, pictures stamped with [TEXT STAMP] and pictures taken with [ ], [ ] or 
[ ] cannot be cropped.
•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [CROPPING]. 
						

							- 163 -
Advanced (Playback)
Minute tilting of the image can be adjusted.
Select [LEVELING] on the [PLAYBACK] Mode menu. (P27)
Press  2/1 to select the picture, and then press [MENU/SET].
Press  2/1 to adjust the tilting, and press [MENU/
SET].
1 : clockwise
2 : counter-clockwise
•
Up to 2 o can be adjusted.
Press  3 to select [YES] and then press [MENU/
SET].
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu.
Note
•Quality of image may become coarse when leveling is performed.•Recorded pixels may decrease compared to original image when leveling is performed.•Leveling may not be performed on images recorded with other equipment.•Motion pictures, pictures stamped with [TEXT STAMP] and pictures taken with the [QUALITY] 
set to [ ], [ ] or [ ] cannot be leveled.
•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [LEVELING].
  [LEVELING] 
						

							Advanced (Playback)
- 164 -
This mode allows you to automatically display pictures vertically if they were recorded 
holding the camera vertically.
Select [ROTATE DISP.] on the [PLAYBACK] Mode menu.  (P27)
Note
•When you play back pictures on a PC, they canno t be displayed in the rotated direction unless 
the OS or software is compatible with Exif. Exif  is a file format for still pictures which allows 
recording information etc. to be added. It was established by “JEITA (Japan Electronics and 
Information Technology Industries Association)”.
•It may not be possible to rotate pictures that have been recorded with other equipment.•The display is not rotated during Multi Playback  (P57).
 [ROTATE DISP.]
Press  4 to select [ON] and then press [MENU/
SET].
•The pictures are displayed without being rotated when you 
select [OFF].
Press [MENU/SET] to close the menu. 
						

							- 165 -
Advanced (Playback)
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
•
Play back only the pictures set as favorites. ([FAVORITE PLAY])•Play back the pictures set as favorites only as a slide show.•Delete all the pictures not set as favorites. ([ALL DELETE EXCEPT Ü])
Select [FAVORITE] on the [PLAYBACK] Mode menu.  (P27)
∫Canceling all the [FAVORITE] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set as a favorite.
Note
•You can set up to 999 pictures as favorites.•When printing pictures at a photo printing store, [ALL DELETE EXCEPT Ü] (P61)  is useful so 
only the pictures you want to be printed remain on the card.
•You may not be able to set pictures taken with other equipment as favorites.•The pictures that were taken with the [QUALITY] set to [ ] cannot be set to [FAVORITE].
  [FAVORITE]
Press  4 to select [ON] and then press [MENU/
SET].
•You cannot set pictures as favorites if [FAVORITE] is set to 
[OFF]. Also [ Ü] will not appear when [FAVORITE] is set to 
[OFF] even if it was previously set to [ON].
Press [MENU/SET] to close the menu.
Press  2/1 to select the picture and then press  4.
•Repeat the above procedure.•If 4 is pressed again, the favorite setting is canceled. 
						

							Advanced (Playback)
- 166 -
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to  print and whether or not to print the recording 
date on the pictures when using a DPOF compatible photo printer or photo printing store. 
For details, ask at your photo printing store.
When you want to use a photo printing store to print pictures recorded on the built-in 
memory, copy them to a card  (P170) and then set the print setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Select [PRINT SET] on the [PLAYBACK] Mode menu.  (P27)
Press  3/4 to set the number of prints, and then press [MENU/SET] 
to set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu.
 [PRINT SET]
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then 
press [MENU/SET].
[SINGLE] [MULTI]
Press  2/1 to select 
the picture. Press 
3/4 /2/ 1 to 
select the pictures. 
						

							- 167 -
Advanced (Playback)
∫Canceling all the [PRINT SET] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set for printing.
∫ To print the date
After setting the number of prints, set/cancel  printing with the recording date by pressing 
[DISPLAY].
•
When you go to a photo printing store for digital printing, be sure to order the printing of the 
date additionally if required.
•Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
•The date cannot be printed on pictures stamped with text.
Note
•The number of prints can be set from 0 to 999.•With a printer supporting PictBridge, the date print settings of the printer may take precedence 
so check if this is the case.
•It may not be possible to use the print settings  with other equipment. In this case, cancel all the 
settings, and reset the settings.
•[PRINT SET] cannot be set for motion pictures and pictures that were taken with the 
[QUALITY] set to [ ].
•If the file is not based on the DCF standard, the DPOF print setting cannot be set. 
						

							Advanced (Playback)
- 168 -
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] Mode menu.  (P27)
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu.
∫Canceling all the [PROTECT] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].2Press  3 to select [YES] and then press [MENU/SET].3Press [MENU/SET] to close the menu.
•If you press [MENU/SET] while canceling protection, the canceling will stop halfway.
Note
•The protect setting may not be effective on other equipment.•Even if you protect pictures in the built-in memo ry or a card, they will be deleted if the built-in 
memory or the card is formatted.
•Even if you do not protect pictures on a card, they cannot be deleted when the card’s 
Write-Protect switch is set to [LOCK].
  [PROTECT]
Press  3/4 to select [SINGLE] or [MULTI] and then 
press [MENU/SET].
Select the picture, and then 
press [MENU/SET] to set.
When [MULTI] has been selected
•Repeat these steps for each picture.•The settings are canceled when 
[MENU/SET] is pressed again.
[SINGLE] [MULTI]
Press  2/1 to select 
the picture. Press 
3/4 /2/ 1 to 
select the pictures. 
						

							- 169 -
Advanced (Playback)
You can delete or change the information relating to Face Recognition for the selected 
picture.
Select [FACE REC EDIT] on the [PLAYBACK] Mode menu. (P27)
Note
•Cleared information regarding the [FACE RECOG.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be 
categorised using Face Recognition in [CATEGORY PLAY].
•You cannot edit the Face Recognition information of protected pictures.
  [FACE REC EDIT]
Press  3/4 to select [REPLACE] or [DELETE] and 
then press [MENU/SET].
Press  2/1 to select the picture and then press 
[MENU/SET].
•You cannot select pictures for which Face Recognition 
information has not been registered.
Press  2/1 to select the person and then press 
[MENU/SET].
•[DELETE]  > step6.•You cannot select a person who has not been registered.
Press  3/4/2/ 1 to select the person to replace 
and then press [MENU/SET].
Press  3 to select [YES] and then press [MENU/
SET].
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu. 
						

							Advanced (Playback)
- 170 -
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] Mode menu. (P27)
Press  3/4 to select the copy destination and 
then press [MENU/SET].
Press  2/1 to select the picture and then press [MENU/SET].
Press  3 to select [YES], and then press [MENU/
SET].
•Pressing [MENU/SET] during  copying will cancel the copy 
partway through.
•Do not turn the camera off at any point during the copying 
process.
Press [‚ ] to return to the menu screen.
•Press [MENU/SET] to close the menu.•If you copy from the built-in memory to a card, all the pictures are copied and then the 
screen automatically returns to the playback screen.
Note
•Image data can be copied only partway when there is not enough space in the card when 
[ ] is selected. We recommend using a card which has more free space than the built-in 
memory (about 40 MB). 
•If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, a new  folder is created and the picture is copied. 
If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, that picture is not copied.  (P201)
•It may take time to copy the picture data.•Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a Panasonic digital camera, you may not be able to 
copy them if they were edited with a PC.)
•[PRINT SET], [PROTECT] or [FAVORITE] settings will not be copied. Perform the settings 
again after copying is finished.
•Motion picture recorded in [AVCHD Lite] cannot be copied.
 [COPY]
: All the picture data in the built-in memory are copied 
onto the card at one time.  > step 4.
: One picture at a time is copied from the card to the  built-in memory.  > step 
3.