Panasonic Dmc G3 Owners Manual
Have a look at the manual Panasonic Dmc G3 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 19
- 19 -
Preparation
Charging the Battery
∫About batteries that you can use with this unit
•
Use the dedicated charger and battery.
•The battery is not charged when the camera is shipped. Charge the battery before use.•Charge the battery with the charger indoors.
∫ About the [CHARGE] indicator
On: It will light up while charging.
Off: It will turn off when it completes the charging normally.
•
When the [CHARGE] indicator flashes–The battery temperature is too high or too low. It is recommended to charge...](http://img.usermanuals.tech/thumb/58/65514/w64_dmc-g3_adv_en_om_d-18.png "Page 19
- 19 -
Preparation
Charging the Battery
∫About batteries that you can use with this unit
•
Use the dedicated charger and battery.
•The battery is not charged when the camera is shipped. Charge the battery before use.•Charge the battery with the charger indoors.
∫ About the [CHARGE] indicator
On: It will light up while charging.
Off: It will turn off when it completes the charging normally.
•
When the [CHARGE] indicator flashes–The battery temperature is too high or too low. It is recommended to charge...")
![Page 21
- 21 -
Preparation
∫Battery indication
The battery indication is displayed on the screen.
•
The indication turns red and blinks if the remaining battery power is exhausted. (The status
indicator also blinks) Recharge the battery or replace it with a fully charged battery.
∫ Recording still pictures (when using the LCD monitor/Viewfinder)
(By CIPA standard in Program AE Mode)
Recording conditions by CIPA standard
•
CIPA is an abbreviation of [Camera & Imaging Products Association].•Temperature: 23 oC...](http://img.usermanuals.tech/thumb/58/65514/w64_dmc-g3_adv_en_om_d-20.png "Page 21
- 21 -
Preparation
∫Battery indication
The battery indication is displayed on the screen.
•
The indication turns red and blinks if the remaining battery power is exhausted. (The status
indicator also blinks) Recharge the battery or replace it with a fully charged battery.
∫ Recording still pictures (when using the LCD monitor/Viewfinder)
(By CIPA standard in Program AE Mode)
Recording conditions by CIPA standard
•
CIPA is an abbreviation of [Camera & Imaging Products Association].•Temperature: 23 oC...")
![Page 22
Preparation
- 22 -
∫Recording motion pictures (when using the LCD monitor)
–[AVCHD] (Recording with picture quality set to [FSH])
–[MOTION JPEG] (Recording with picture quality set to [HD])
•These times are for an ambient temperature of 23 oC (73.4 oF) and a humidity of 50%RH.
Please be aware that these times are approximate.
•Actual recordable time is the time available for recording when repeating actions such as
switching the power supply [ON]/[OFF], starting/stopping recording etc.
•Motion picture...](http://img.usermanuals.tech/thumb/58/65514/w64_dmc-g3_adv_en_om_d-21.png "Page 22
Preparation
- 22 -
∫Recording motion pictures (when using the LCD monitor)
–[AVCHD] (Recording with picture quality set to [FSH])
–[MOTION JPEG] (Recording with picture quality set to [HD])
•These times are for an ambient temperature of 23 oC (73.4 oF) and a humidity of 50%RH.
Please be aware that these times are approximate.
•Actual recordable time is the time available for recording when repeating actions such as
switching the power supply [ON]/[OFF], starting/stopping recording etc.
•Motion picture...")
![Page 23
- 23 -
Preparation
∫Playback (when using the LCD monitor)
Note
•
The operating times and number of recordable pictures will differ according to the
environment and the operating conditions.
For example, in the following cases, the operating times shorten and the number of recordable
pictures is reduced.
–In low-temperature environments, such as on ski slopes.–Using the [AUTO] of [LCD MODE] or [MODE1] of [LCD MODE].– When flash is used repeatedly.•When the operating time of the camera become s extremely...](http://img.usermanuals.tech/thumb/58/65514/w64_dmc-g3_adv_en_om_d-22.png "Page 23
- 23 -
Preparation
∫Playback (when using the LCD monitor)
Note
•
The operating times and number of recordable pictures will differ according to the
environment and the operating conditions.
For example, in the following cases, the operating times shorten and the number of recordable
pictures is reduced.
–In low-temperature environments, such as on ski slopes.–Using the [AUTO] of [LCD MODE] or [MODE1] of [LCD MODE].– When flash is used repeatedly.•When the operating time of the camera become s extremely...")
![Page 26
Preparation
- 26 -
Note
•Write-Protect switch A provided (When this switch is set to the [LOCK] position,
no further data writing, deletion or formatting is possible. The ability to write, delete
and format data is restored when the switch is returned to its original position.)
•The data on the card may be damaged or lost due to electromagnetic waves, static
electricity or breakdown of the camera or the card. We recommend storing
important data on a PC etc.
•Do not format the card on your PC or other...](http://img.usermanuals.tech/thumb/58/65514/w64_dmc-g3_adv_en_om_d-25.png "Page 26
Preparation
- 26 -
Note
•Write-Protect switch A provided (When this switch is set to the [LOCK] position,
no further data writing, deletion or formatting is possible. The ability to write, delete
and format data is restored when the switch is returned to its original position.)
•The data on the card may be damaged or lost due to electromagnetic waves, static
electricity or breakdown of the camera or the card. We recommend storing
important data on a PC etc.
•Do not format the card on your PC or other...")
- 21 - Preparation ∫Battery indication The battery indication is displayed on the screen. • The indication turns red and blinks if the remaining battery power is exhausted. (The status indicator also blinks) Recharge the battery or replace it with a fully charged battery. ∫ Recording still pictures (when using the LCD monitor/Viewfinder) (By CIPA standard in Program AE Mode) Recording conditions by CIPA standard • CIPA is an abbreviation of [Camera & Imaging Products Association].•Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when LCD monitor is on.•Using a Panasonic SD Memory Card (2 GB).•Using the supplied battery.•Starting recording 30 seconds after the camera is turned on.•Recording once every 30 seconds with full flash every second recording.•Turning the camera off every 10 recordings and leaving it until the temperature of the battery decreases. The number of recordable pictures varies depending on the recording interval time. If the recording interval time becomes longer, the number of recordable pictures decreases. [For example, if you were to take one picture every two minutes, then the number of pictures would be reduced to approximately one-quarter of the number of pictures given above (based upon one picture taken every 30 seconds).] Approximate operating time and number of recordable pictures When the interchangeable lens (H-FS014042) is used Number of recordable pictures Approx. 270 pictures Recording timeApprox. 135 min When the interchangeable lens (H-FS045200) is used Number of recordable pictures Approx. 250 pictures Recording timeApprox. 125 min
Preparation - 22 - ∫Recording motion pictures (when using the LCD monitor) –[AVCHD] (Recording with picture quality set to [FSH]) –[MOTION JPEG] (Recording with picture quality set to [HD]) •These times are for an ambient temperature of 23 oC (73.4 oF) and a humidity of 50%RH. Please be aware that these times are approximate. •Actual recordable time is the time available for recording when repeating actions such as switching the power supply [ON]/[OFF], starting/stopping recording etc. •Motion picture recorded continuously in [MOTION JPEG] is up to 2 GB. Only the maximum recordable time for 2 GB is displayed on the screen. When the interchangeable lens (H-FS014042) is used Recordable time Approx. 110 min Actual recordable time Approx. 55 min When the interchangeable lens (H-FS045200) is used Recordable timeApprox. 100 min Actual recordable time Approx. 50 min When the interchangeable lens (H-FS014042) is used Recordable timeApprox. 120 min Actual recordable time Approx. 60 min When the interchangeable lens (H-FS045200) is used Recordable timeApprox. 110 min Actual recordable time Approx. 55 min
- 23 - Preparation ∫Playback (when using the LCD monitor) Note • The operating times and number of recordable pictures will differ according to the environment and the operating conditions. For example, in the following cases, the operating times shorten and the number of recordable pictures is reduced. –In low-temperature environments, such as on ski slopes.–Using the [AUTO] of [LCD MODE] or [MODE1] of [LCD MODE].– When flash is used repeatedly.•When the operating time of the camera become s extremely short even after properly charging the battery, the life of the battery may have expired. Buy a new battery. When the interchangeable lens (H-FS014042) is used Playback time Approx. 210 min When the interchangeable lens (H-FS045200) is used Playback timeApprox. 190 min
Preparation - 24 - Inserting and Removing the Card (optional)/the Battery •Check that this unit is turned off.•We recommend using a Panasonic card. Slide the release lever in the direction of the arrow and open the card/battery door. •Always use genuine Panasonic batteries.•If you use other batteries, we cannot guarantee the quality of this product. Battery: Being careful about the battery orientation, insert all the way until you hear a locking sound and then check that it is locked by lever A. Pull the lever A in the direction of the arrow to remove the battery. Card: Push it securely all the way until you hear a “click” while being careful about the direction in which you insert it. To remove the card, push the card until it clicks, then pull the card out upright. B : Do not touch the connection terminals of the card. 1:Close the card/battery door. 2:Slide the release lever in the direction of the arrow. Note •Remove the battery after use.•The battery will be exhaus ted if left for a long period of time after being charged.•The battery becomes warm after using it and during and after charging. The camera also becomes warm during use. This is not a malfunction. •Before removing the card or battery, turn the camera off, and wait until the status indicator has gone off completely. (Otherwise, this unit may no longer operate normally and the card itself may be damaged or the recorded pictures may be lost.)
- 25 - Preparation About the Card The following cards which conform to the SD video standard can be used with this unit. (These cards are indicated as card in the text.) ¢SD Speed Class is the speed standard regarding continuous writing. Check via the label on the card, etc. Access to the card The access indication lights red when pictures are being recorded on the card. • Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor (optional) when the access indication is lit (when pictures are being written, read or deleted, or the card is being formatted). Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally. If operation fails due to vibration, impact or static electricity, perform the operation again. •Please confirm the latest information on the following website.http://panasonic.jp/support/global/cs/dsc/(This Site is English only.) About cards that can be used with this unit Remarks SD Memory Card (8 MB to 2 GB)•Use a card with SD Speed Class¢ with “Class 4” or higher when recording motion pictures in [AVCHD]. Also, use a card with SD Speed Class with “Class 6” or higher when recording motion pictures in [MOTION JPEG]. •SDHC Memory Card can be us ed with SDHC Memory Card or SDXC Memory Card compatible equipment. •SDXC Memory Card can only be used with SDXC Memory Card compatible equipment. •Check that the PC and other equipment are compatible when using the SDXC Memory Cards. http://panasonic.net/avc/sdcard/information/SDXC.html •Only the cards with capacity listed left can be used. SDHC Memory Card (4 GB to 32 GB) SDXC Memory Card (48 GB, 64 GB) e.g.:
Preparation - 26 - Note •Write-Protect switch A provided (When this switch is set to the [LOCK] position, no further data writing, deletion or formatting is possible. The ability to write, delete and format data is restored when the switch is returned to its original position.) •The data on the card may be damaged or lost due to electromagnetic waves, static electricity or breakdown of the camera or the card. We recommend storing important data on a PC etc. •Do not format the card on your PC or other equipment. Format it on the camera only to ensure proper operation. (P68) •Keep the Memory Card out of reach of children to prevent swallowing. 2 A
- 27 - Preparation ∫About the display of the number of recordable pictures and available recording time • Switching between the display of number of recordable pictures and available recording time can be performed in the [REMAINING DISP.] (P141) in the [CUSTOM] menu. A Number of recordable pictures B Available recording time ∫Number of recordable pictures •[9999 i] is displayed if there are more than 10000 pictures remaining. •Aspect ratio [ X], Quality [ A] •Aspect ratio [ X], Quality [ ] ∫Available recording time (when recording motion pictures) •“h” is an abbreviation for hour, “m” for minute and “s” for second. •[AVCHD] •[MOTION JPEG] •The number of recordable pictures and the available recording time are an approximation. (These vary depending on the recording conditions and the type of card.) •The number of recordable pictures and the available recording time varies depending on the subjects. •Maximum time to record motion pictures continuously with [AVCHD] is 13 hours 3 minutes 20 seconds. Screen will only display up to 13 hours 3 minutes 20 seconds. However, the recording may stop before that depending on the remaining battery level. (P21) •Motion picture recorded continuously in [MOTION JPEG] is up to 2 GB. Only the maximum recordable time for 2 GB is displayed on the screen. Approximate number of recordable pictures and available recording time [PICTURE SIZE]2GB8GB32 GB64 GB L (16M)220 900 3640 7260 M (8M)410 1650 6690 13000 S (4M)700 2840 11500 22460 [PICTURE SIZE]2GB8GB32 GB64 GB L (16M) 69270 1120 2250 M (8M) 80320 1310 2610 S (4M) 87350 1420 2850 [REC QUALITY]2GB8GB32 GB64 GB FSH 13m00s 1h00m 4h9m 8h25m SH13m00s 1h00m 4h9m 8h25m [REC QUALITY]2GB8GB32GB64 GB HD 7m20s 32m10s 2h12m 4h29m VGA 19m20s 1h23m 5h45m 11h39m QVGA 53m50s 3h52m 15h55m 32h17m
Preparation - 28 - Setting Date/Time (Clock Set) •The clock is not set when the camera is shipped. Turn the camera on. •The status indicator 1 lights when you turn this unit on.•If the language select screen is not displayed, proceed to step4. Touch [LANGUAGE SET]. Select the language. Touch [CLOCK SET]. Touch the items you wish to set (Year/Month/ Day/Hours/Minutes), and set using [ 3]/[4]. •You can continue to switch the settings by continuously touching [ 3]/[4]. •Touch [CANCEL] to cancel the date and time settings without setting a date and time. To set the display order and the time display format. •Touch [STYLE] to display the settings screen for setting display order/time display format. Clock can be set with touch operation only at the time of purchase. To change the clock settings, refer to [CLOCK SET] in the [SETUP] menu (P61). ON OFF
- 29 - Preparation Touch [SET] to set. Touch [SET] in the confirmation screen. Note •The clock setting is maintained for 3 months using the built-in clock battery even without the battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.) •If the clock is not set, the correct date cannot be printed when you stamp the date on the pictures with [TEXT STAMP] (P152) or order a photo studio to print the pictures. •Be sure to set the correct date and time, otherwise the date stamp will be incorrect when the picture is printed.
Basic - 30 - BasicSelecting the Recording Mode ∫To select a Recording Mode with the mode dial Switching the mode by rotating the mode dial. Align a desired mode with part A. • Rotate the mode dial slowly and surely to adjust to each mode. ∫ To select Intelligent Auto Mode Press [¦ ]. •[¦] button will light up when it is switched to Intelligent Auto Mode.•The Recording Mode selected by the mode dial is disabled while the [¦] button is lit.