Panasonic Dmp Bd70v Operating Instructions

							RQT9412
11
Video Connections (TV)
For audio output, refer to pages 12 and 13.
AConnecting to your TV, via HDMI AV OUT≥“HDMI Video Mode” and “HDMI Audio 
Output” should be set to “On”. ( >34)
≥ The HDMI connection supports VIERA 
Link “HDAVI Control” ( >28) when used 
with a compatible Panasonic TV.
≥ This cable provides both Video and Audio 
connections. 
B Connecting to your TV, via COMPONENT VIDEO OUT≥Connect terminals of the same color.
≥ Set the “Black Level Control” to “Darker”. 
(> 32)
≥ Using the COMPONENT VIDEO OUT 
terminal, while playing DVD-Video or 
VHS, the video output resolution is 
limited to “480p”.
≥ Be sure your TV supports at least 480p. 
Set “Component Video Resolution” to 
“480p”, “720p” or “1080i”. ( >34)
≥ If this unit is connected to an amplifier/
receiver, etc. via an HDMI cable with 
“HDMI Video Mode” set to “On” ( >34), 
the video will be fixed to 480i.
C Connecting to your TV, via VIDEO OUT≥Connect terminals of the same color.
LAN
10BASE-T/
100BASE-TX
AV OUT
AC IN
HDMI IN
HDMI AV OUT Television
HDMI cable
Back of the unit
VIDEO OUT
COMPONENT VIDEO OUTAUDIO OUTYL
RPB
PROPTICALDIGITAL AUDIO OUT (PCM/BITSTREAM )
COMPONENT
VIDEO IN
Back of the unit
Component Video cable Television
VIDEO OUT
COMPONENT VIDEO OUTAUDIO OUTYL
RPB
PROPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM )
AUDIO INR         LVIDEO INVIDEO IN
Television
Audio/Video cable 
(included)
VIDEO OUT Back of the unit
Getting started
DMP-BD70V-RQT9412_ENG.book  11 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
12
Connections
Digital Audio Connections
DConnecting to HDMI AV OUT terminal≥“HDMI Video Mode” and “HDMI Audio Output” 
should be set to “On”. ( >34)
≥ “Digital Audio Output” : Depending on the 
connected amplifier/receiver. ( >33)
≥ The HDMI connection supports VIERA Link 
“HDAVI Control” ( >28) when used with a 
compatible Panasonic TV.
≥ Enjoying High Bit rate Audio of BD-Video 
(> 8)
EConnecting to Digital Audio Output terminal≥Please set “Digital Audio Output” to the 
connection you will use for optical  digital. 
(> 33)
≥ When connecting a TV ( >11 ,   A) with HDMI 
AV OUT terminal, set “HDMI Audio Output” to 
“Off”. ( >34) 
(Otherwise, the sound may not be output with 
the desired audio.)
LAN
10BASE-T/
100BASE-TX
AV OUT
AC IN
HDMI IN Multi channel speakers
HDMI cable 
Amplifier/receiver
Back of the unitTelevision
HDMI IN
HDMI OUT
OPTICAL IN
VIDEO OUT
COMPONENT VIDEO OUTAUDIO OUTYL
RPB
PROPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM )
Back of the unit
Amplifier/receiver
Optical digital audio cable
DMP-BD70V-RQT9412_ENG.book  12 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
13
Analog Audio Connection
AC power connection
F Connecting to AUDIO OUT terminal ≥Using the two analog audio channels this 
connection provides, you will not be able to 
use any surround sound audio modes.
VIDEO OUT
COMPONENT VIDEO OUTAUDIO OUTY L
RPB
PROPTICALDIGITAL AUDIO OUT (PCM/BITSTREAM )
AUDIO IN
R         LVIDEO IN
AUDIO OUT
Television
Audio/Video cable 
(included)
Back of the unit Amplifier/receiver
AUDIO IN OR
≥
For best results this unit should be connected 
directly to an AC outlet.
≥ This unit consumes a small amount of AC 
power (“Quick Start”: “Off”, less than 0.5 W) 
even when turned off. In the interest of power 
conservation, if you will not be using this unit 
for an extended period of time, it can be 
disconnected.
LAN
10BASE-T/
100BASE-TX
AV OUT
VIDEO OUT
COMPONENT VIDEO OUTAUDIO OUTYL
RPB
PROPTICALDIGITAL AUDIO OUT(PCM/BITSTREAM )
AC IN
Back of the unit
AC power supply cord (included)
To a household AC outlet
(AC 120 V, 60 Hz) Cooling fan
Getting started
DMP-BD70V-RQT9412_ENG.book  13 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							14
RQT9412
Remote control and unit reference guide
!Turn the unit on and off ( >15)
@ TV operation buttons ( >15)
You can operate the TV through the unit’s remote 
control.
[ Í TV POWER] : Turn the television on and off
[INPUT] : Input select
[ ij VOL] : Adjust the volume
[ WX CH] : Channel select
# Open or close the disc tray ( >19)
$ Select title numbers, etc./Enter numbers or 
characters ( >18, 20)
(The character buttons may be used when 
operating VIERA CAST contents. 
B 27)
[CANCEL] : Cancel/Reset the tape counter 
( > 17, 26)
% Basic playback control buttons ( >20, 21, 26)
^ Show status messages ( >21, 26)
& Show Pop-up menu ( >20)
* Show Top menu/Direct Navigator ( >20)
( Show sub menu ( >24)
AJ These buttons are used when:
≥Operating a BD-Video disc that includes Java
TM 
applications (BD-J). For more information about 
operating this kind of disc, please read the 
instructions that came with the disc.
≥
Displaying “Title View” and “Album View” screens. 
(Only the [R] and [G] buttons, 
B 24)
≥ Operating contents of VIERA CAST.  (> 27)
AA Show Setup menu ( >32)
AB Switch on/off Secondary Video (Picture-in-picture) 
(> 23)
AC Transmit the remote control signal
AD TRACKING/V-LOCK ( >26)
AE Select audio ( >21, 26)
AF Reproduce more natural audio ( >21)
AG Show FUNCTIONS menu ( >21)
AH Selection/OK, Frame-by-frame ( >21)
AI Show on-screen menu ( >30)
BJ Return to previous screen
BA Select drive (BD/DVD/CD, SD card, USB device, 
VHS) ( >20)
BB Displays the Home screen of the VIERA CAST 
(> 27)
1 Cassette eject button ( >19)
2 Cassette compartment ( >19)
3 Open or close the disc tray ( >19)
4 Disc tray ( >19)
5 SD Card LED
≥It is possible to set the LED to turn on/off. ( >33, SD Card LED 
Control)
6 POWER button (POWER  Í/I) (>15)
Press to switch the unit from on to standby mode or vice versa. In 
standby mode, the unit is still consuming a small amount of power.
7 Remote control signal sensor ( >5) 8
Display
The indicator and access lamp blink when reading data from a card, 
or USB device, or writing data to a card.
9 Stop  ( >20, 26)
: Pause ( >20, 26)
; Start play ( >20)
< USB port ( >19)
= SD card slot ( >19)
Rear panel terminals ( >10–13, 16)



 \b
SD CARDSD CARDPOWER
EJECT
OPEN/CLOSE
Pull to flip down the 
front panel.
Disc indicator SD card 
indicator Tape indicator USB access 
lamp
RQT9412~Body_mst.fm  14 ページ  ２００９年３月５日　木曜日　午前９時５０分 
						

							RQT9412
15
Setting
Easy Setting
After connecting your new player and pressing the power button, a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video input on the television.
Reprogramming the remote control for TV control
You can operate the TV using the unit’s remote control.
Point the remote control at the television.
1Press [ ÍPOWER].
Setup screen appears.
≥If this unit is connected to a Panasonic TV (VIERA)  supporting HDAVI Control 2 or later via an HDMI cable, 
then the “On-screen Language” and “TV Aspect” setting 
information on the TV are captured from the TV.
2Follow the on-screen instructions and 
make the settings with [
3,4] and [OK].
“On-screen Language”, “TV Aspect” and “Quick Start” are 
set. ( >33, 34, 36)
≥You can perform this setup anytime by 
selecting “Easy Setting” in the Setup 
menu. ( >36)
≥ You can also change these settings 
individually. ( >33, 34, 36
)
OK
POWER
1 Input the 4-digit code with the numbered buttons while 
pressing [Í TV POWER].
e.g., 0001: [0]  B [0]  B [0]  B [1] 
2 Test by turning on the television.
≥If your television brand has more than 
one code listed, select the one that 
allows correct operation.
≥ If your television brand  is not listed or if 
the code listed for your television does 
not allow control of your television, this 
remote control is not compatible with 
your television. Use your television’s 
remote control.
BrandTV CodeBrandTV CodeBrandTV Code
Panasonic 0051/0055/0250/0650ADVENT0761/078 3/0815/0 817/0 842
AKAI 0030/0098/0672/0702/0 812
AMERICA ACTION01 80
AOC 0003/0019/0030/0052/0137/01 85
APEX DIGITAL0748/0765/0767/08 79/0890
AUD IOVOX 0003/0092/01
80/0451/0623/0 802/08 75/ 
1937
AXION1937
BANG & OLUFSEN 0620/1620
BROKSONIC0003/0236/0463
CASIO 0611/1205
DA EWOO0019/0039/0066/0067/0091/0092/0451/
0623/0661/0672/1661
EMERSON 0019/003
8/0039/0154/015 8/0171/0177/
0178 /0179/018 0/0181/018 2/0183/018 5/
0236/0270/02 80/02 82/0463/0623
ENVISION0030/08 13
EPSON 0 833/0 840
FISHER0154/0159
FUJITSU 0179/018 6/0683/0809/08 53
GE0021/0027/0029/0047/0051/0055/0135/
0138/0174/017 8/0251/0279/02 82/0451/
0747/1347/1447
GOLDSTAR 0019/0030/0032/0106/017
8/0317/0409/
0442/0457/0700/0 856/117 8/1265
GO VIDEO088 6
HAIER 076 8/1034
HANNSPREE134 8/1351/1352
HEWLETT 
PA C K A R D 10
88/10 89/1101/1494/1502
HISENSE074 8 HITACHI
0016/0032/003
8/0056/0095/0097/0145/
0151/0173/0227/0279/0409/0413/1145
INFOCUS0736/073 8/0741/0752/078 1/1164/1516
JVC 0036/0053/0069/0160/0169/01
82/0731/
1253
KLH0765/0767
LG 0019/0030/0032/0106/017
8/0317/0409/
0442/0457/0700/0 856/117 8/1265
LOEWE0136
MAGNAVOX 0020/0024/002
8/0030/0036/0054/0096/
0179/018 6/0187/0230/03 86/0706/08 02/
1254/1454
MARANTZ0030/0054/0444/0704/0 854/0 855/1154
MEMOREX 0016/0106/0150/0154/017 8/0179/0463
MITSUBISHI 0014/0019/0093/0098
/0150/0155/0178/
0331/035 8/0 836/0 868/1250
NORCENT 074 8/0 824/10 89
OPTOMA 088 7
ORION 0179/0236/0463/1463
PHILIPS 0054/0690/1154/1454
PHILIPS 
MAGNAVOX 0020/0024/002
8/0030/0036/0054/0096/
0179/01 86/01 87/0230/038 6/0690/0706/
0 802/1154/1254/1454
PIONEER 003 8/0166/0172/0679/0 866
POLAROID 0765/0
865/1262/1276/1314/1316/1326/
1327/1328 /1341/1498/1523
PROSCAN 0047/0747/1347/1447
PROVIEW 0 835/1401/1498
RCA 001
8/0019/0029/0038 /0047/0090/0135/
0174/0278 /0679/0747/1047/1147/1247/
1347/1447/1547
RUNCO 0017/0030/0251/0497/0603 SAMPO
0030/0032/0039/0052/0100/0110/1755
SAMSUNG0019/0030/0032/0056/0060/0178/0329/
0408/0427/05 87/0702/0766/08 12/0814/
1060
SANSUI 0463
SANYO0088/0107/0146/0154/0159/0232/04 84/
0799/0 893
SHARP 0039/0093/0153/0157/0165/0220/0281/
03
86/039 8/0491/0688 /0818 /0 851
SONY0000/0011/00 80/0111/0273/0353/08 10/
0 834/0 867/1100
SVA 0587/074 8/076 8/0865/0 870/08 71/0872
SYLVANIA0020/002 8/0030/0054/0065/0096/0171/
03 81
SYMPHONIC 0171/018 0
SYNTAX-BRILLIAN1007/1144/1240/1255/1257/1258/1331
TATUNG 0003/0049/0055/0396/1101/1756
THOMSON0209/0210/0047
TOSHI BA 0036/0060/0149/0154/0156/0650/08
32/
0 845/1156/1164/1256/1265/1356/1656/
1704
ULTRA0391
VIEWSONIC 0 857/0864/0 885/1755
WESTINGHOUSE088 5/0 889/08 90/12 82/1577
YAMAHA 0019/0030/0769/0833/0 839
ZENITH0016/0017/0092/0178 /0463/1265
Getting started
DMP-BD70V-RQT9412_ENG.book  15 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
16
Broadband network connection
The following services can be used when this unit is connected to the 
Internet via a broadband connection.
≥ Firmware can be updated
 (B right)
≥ You can enjoy the BD-Live ( >23)
≥ You can enjoy the VIERA CAST ( >27)
≥ Use shielded LAN cables when c onnecting to peripheral devices.
≥ With installation where your broadband modem is connected 
directly to your PC, a router must be installed.
≥Use a router that supports 10BASE-T/100BASE-TX.
≥ In case all available connection  on your router is being used, a hub 
or switch can be installed to provide additional connections.
≥ When operating the VIERA CAST, us e high-speed Internet service 
no less than 1.5 Mbps for SD (Standard Definition) and 6 Mbps for 
HD (High Definition) picture quality by your local broadband 
company.
– If using slow Internet connection, the video may not be displayed  correctly.
≥ After physically connecting this unit to your broadband connection, 
some configuration is required. ( >17)
≥ Inserting any cable other than a LAN cable in the LAN terminal can 
damage the unit.
LAN
10BASE-T/
100BASE-TX
AV OUT
VIDEO OUT
COMPONENT VIDEO OYOPTICALDIGITAL AUDIO OUT (PCM/BITSTREAM )
AC IN
Telecommunications 
equipment (modem, etc.)Straight LAN cable 
(not included)
Broadband router, etc. Back of the unit
Internet
Firmware updates
Occasionally, Panasonic releases firmware updates for this BD 
Player. Firmware is embedded software that controls this unit’s 
microprocessor. These updates may ad
d or improve a feature of this 
unit. Firmware updates may also be released to correct operating 
irregularities that are discovered  with certain movies. These updates 
are available at no charge. 
Automatically check the firmware
This unit is capable of auto firmware check if it is connected to the 
Internet via a broadband connection.
When latest firmware version is available, the following screen is 
displayed.
Select “Yes” or “No”.
≥ If “Yes” is selected, then follow the on-screen instructions.
≥ If “No” is selected, then manually update the firmware later. 
(B below)
After the latest firmware is downloaded, the system will be restarted 
and the firmware will be updated.
When the system is restarted, the screen 
display disappears and “START” is displayed 
on the unit’s display.
After the firmware is updated and the system is restarted, the 
following screen indicates that the firmware update has been 
completed.
≥ During the update process, no other operations can be performed. 
Serious damage may occur if you turn the power off and/or press 
any buttons.
≥Downloading will require several minutes. It may take longer or the 
Internet may not be connected depending on the connection 
environment. It is required that you use a broadband connection.
≥ When the unit is connected to the Internet, communication charges 
may be generated.
≥ If you do not want to check for the latest firmware version when the 
unit is turned on, set “Automatic Update Check” to “Off”. ( >36)
Manually updating the firmware
If the firmware update is not carried out when the unit is turned on, a 
message is displayed when displaying the FUNCTIONS menu.
1) Press [SETUP].
2) Press [ 3,4 ] to select “Others” and press [OK].
3) Press [ 3,4 ] to select “Firmware Update” and press [OK].
4) Press [ 3,4 ] to select “Update Now” and press [OK].
5) Press [ 2,1 ] to select “Yes” and press [OK].
If downloading on this unit fails or this unit is not connected to 
the Internet, then you can download the latest firmware from 
the following website and burn it to a CD-R to update the 
firmware.
http://panasonic.net/support/
(This site is in English only.)
Firmware Update
The latest firmware is available.
  Latest Online Version: x.x  Current Installed Version: x.xDo you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Ye s No
The firmware was updated.Current Installed Version: x.x
RETURNOK
The latest firmware is available.
Please update firmware in Setup.
DMP-BD70V-RQT9412_ENG.book  16 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
17
Network settings
These settings are used if you will connect this unit to the Internet. 
≥
The connection to the Internet may take time or the Internet may not be 
connected depending on the connection environment. (
>35)
It is required that y ou use a broadband connection.
Preparation≥Connect to a broadband network. ( >16)
Testing of “IP Address/DNS Settings”
Always test the connection when a LAN cable is connected.
1 Press [SETUP].
2 Press [ 3,4] to select “Network” 
and press [OK].
3 Press [ 3,4] to select “IP Address/
DNS Settings” and press [OK].
4 Press [ 3,4] to select “Connection 
Test” and press [OK].
“Testing”: The test is in progress.
“Pass”: The connection is completed. Press [RETURN] to exit.
“Fail”:
Please check the connection and settings. (>38)
≥ Please perform the “Connection Test” when any changes are made 
to the “IP Address/DNS Settings”.
≥If the connection test fails, it may be necessary to set the MAC 
address of this unit at the rout er side. The MAC address can be 
displayed by pressing [SETUP] and selecting “Network”.
Setting the IP address
In most cases, default settings can normally be used without 
making any changes.
Set the IP address only when the router has no DHCP server 
functions or when the router’s DHCP server function is disabled.
After performing steps  1–3 ( Dleft)
4 Press [ 3,4] to select “IP Address 
Auto Configuration (DHCP)” and 
press [ 2,1] to select “Off”.
5 Press [ 3,4] to select “IP Address”, 
“Subnet Mask” or “Default 
Gateway” and press [OK].
6 Enter numbers with the numbered 
buttons and press [OK].
7 Press [ 2,1] to select “Yes” and 
press [OK].
≥ After checking the specifications  for your broadband router, enter 
each number. If the number is unknown, then check the number of 
other devices such as personal  computers connected via a LAN 
cable. Assign a different number from those of other devices for the 
“IP Address” and the same number for others.
≥ If a wrong number is entered, then press [CANCEL].
≥ The numeric input range is between 0 and 255.
Setting the DNS-IP
In most cases, default settings can normally be used without 
making any changes.
When setting an assigned DNS server from your Internet service 
provider, perform the following settings. 
After performing steps  1–3 ( Dleft)
4 Press [ 3,4] to select “DNS Auto 
Configuration (DHCP)” and press 
[2, 1] to select “Off”.
5 Press [ 3,4] to select “Primary 
DNS” or “Secondary DNS”and 
press [OK].
6 Enter numbers with the numbered 
buttons and press [OK].
7 Press [ 2,1] to select “Yes” and 
press [OK].
≥ Follow the instructions given by your Internet service provider and 
enter the numbers. If the number is unknown, then check the 
number of other devices such as personal computers connected via 
a LAN cable and assign the same number.
≥ If a wrong number is entered, then press [CANCEL].
≥ The numeric input range is between 0 and 255.
IP Address/DNS Setting s
Connection Test
OnOn
OnOn
OnOn
:„:„:„:…:w:„:„:„:…:w:„:„:„:…:w:„:„:„:w:
						

							18
RQT9412
Network settings
Setting the connection speed
When the connection test results in “Fail” after the IP and DNS-IP 
addresses are assigned, perform the following settings.
After performing steps 1–3 ( >17)
4 Press [ 3,4] to select “Auto Detect 
Connection Speed” and press 
[2, 1] to select “Off”.
5 Press [ 3,4] to select “Connection 
Speed Setting” and press [ 2,1] to 
select a connection speed.
≥ Select a connection speed in accordance with the environment of 
the network connected.
≥ When the settings are changed, the network connection may be 
disabled depending on the device.
Testing of “Proxy Server Settings”
Always test the connection when new “Proxy Server Settings” have 
been made.
1 Press [SETUP].
2 Press [ 3,4] to select “Network” 
and press [OK].
3 Press [ 3,4] to select “Proxy 
Server Settings” and press [OK].
4 Press [ 3,4] to select “Connection 
Test” and press [OK].
“Testing”: The test is in progress.
“Pass”: The connection is completed. Press [RETURN] to exit.
“Fail”: Please check the connection and settings. 
Setting the proxy server
In most cases, default settings can normally be used without 
making any changes. 
Please use this setting when instructed to by your Internet 
service provider.
After performing steps  1–3 ( Dabove)
4 Press [ 3,4] to select “Proxy 
Address” and press [OK]. 5
Press [ 3,4,2, 1] to select a 
character and press [OK].
Text field : shows the text you have entered
Using the numbered buttons to enter characterse.g., entering the letter “F”
1) Press [3] to move to the 3rd row.
2) Press [3] twice to highlight “F”.
3) Press [OK].
Repeat this step to enter other characters.
≥Press [ ;] to delete.
6 Press [ ∫] when you complete the 
entry.
7 Press [ 3,4] to select “Proxy Port 
Number” and press [OK].
8 Enter numbers with the numbered 
buttons and press [OK].
9 Press [ 2,1] to select “Yes” and 
press [OK].
≥ The specified ports may be blocked and not be able to be used 
depending on the network environment.
In order to restore the default settings
After performing steps  1–3
1) Press [ 3,4 ] to select “Reset to factory preset” and press [OK].
2) Press [ 2,1 ] to select “Yes” and press [OK].
RETURN
Proxy Server Settings
Reset to factory preset
Proxy Address
Proxy Port Number
OK
0
Connection Test
_Proxy Address
Space
FinishDelete
OK
RETURN
1234567890
12345678 90ABC
DEFabc
def
ghi
jkl /=
%
+-*
#$&
@
mno []_
pqrs ()
tuv {}
 Iwxyz
“’:;` ^
.,?!
JKL
MNO PQRS
TUV
WXY Z
0  --  9    
GH I
~


  

#$
% &

( )
*

0
Proxy Port Number
Please input Proxy Server Port Number and 
press [OK]. Press [CANCEL] to delete the 
selected character. The number will be set to 
0 if all characters are deleted and [OK] is 
pressed.
Number0  -  9    
DMP-BD70V-RQT9412_ENG.book  18 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
19
Inserting or removing media
Inserting or removing a disc
1Press [ 
						

							RQT9412
20
Play back
Basic play (Playing video contents)
Instructions for operations are generally described using the remote 
control in these operating instructions.
PreparationTurn on the television and select the appropriate video input on the 
television.
1Press [ÍPOWER] to turn on the unit.
2Insert the media (>19).
Play starts.
≥If play does not start, press [ 1](PLAY).
≥ If a media  with data in different file formats is 
inserted, the file selection  men u is displayed. 
Press  [3 ,4 ] to select the desired file format and press  [OK].
≥ If the menu is displayed, press [ 3,4 ,2, 1] to select the item and 
press [OK].
≥ If the screen prompting you to  use the color buttons appears, 
continue to operate with the color buttons on the remote control.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE 
DISPLAYED. Press [ ∫] when you finish to preserve the unit’s motor 
and your television screen.
≥ The producers of the disc can control how discs are played. So you 
may not always be able to control play as described in these 
operating instructions. Read the disc’s instructions carefully.
≥ When playing a set of two or more BD-Video discs, the menu 
screen may continue to display even if the disc has been ejected.
To switch drives
Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD card”, “USB 
device” or “VHS”.
≥If a media is inserted while the unit is stopped, the drive switches 
automatically depending on the inserted media.
To display menus
[BD-V] [AVCHD] [DVD-VR] [DVD-V] 
Press [TOP MENU/DIRECT NAVIGATOR].
To show Pop-up menu [BD-V]
The Pop-up menu is a special feature available with some BD-Video 
discs. This menu may vary with discs. For the operating method, 
refer to the instructions for the disc. 1) Press [POP-UP MENU].
2) Press [ 3,4, 2,1] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [SUB MENU] and selecting 
“Pop-up Menu”.
≥ Press [POP-UP MENU] to exit the screen.
Other operations during play
(These functions may not work depending on the media.)
About the Video cassette  D 26, “Playing a video cassette  [VHS]”
Stop
The stopped position is memorized.
Resume play function Press [ 1] (PLAY) to restart from this position.
≥ The position is cleared if the tray is opened or you press [ ∫] several 
times to display “STOP” on unit’s display.
≥ [BD-V] : On BD-Video discs including BD-J ( >50), the resume 
play function does not work.
≥ [CD]  [MP3]  [MPEG2] : The position is cleared if the unit is turned off.
Pause
≥Press [ ;] again or [ 1] (PLAY) to restart play. 
Search/Slow-motion
The speed increases up to 5 steps.
≥Press [ 1] (PLAY) to revert to normal playback speed.
≥ For some discs, the speed may not change.
SearchWhile playing, press [ 6] or [ 5].
≥ [BD-V] [AVCHD]  [DVD-VR]  [DVD-V] :
Audio is heard during first level of forward search.
≥ [MPEG2] : Audio is not heard during all levels of search.
≥ [CD]  [MP3] : The speed is fixed to a single step.
Slow-motionWhile paused, press [ 6] or [5 ].
≥ [BD-V] [AVCHD] : Forward direction [ 5] only.
≥ [DVD-VR] : If continued for approx. 5 minutes, slow-motion play 
pauses automatically.
Skip
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
Direct Play
During playback, you can access  specific recordings or scenes 
through direct entry of the numbered buttons. 
Play starts from the selected title or chapter.
≥ While stopped (the image on the right is 
displayed on the screen), the title is designated. 
While playing, the chapter is designated.


e.g.,
[BD-V] [AVCHD]
e.g., 5: [0]  B [0]  B [5]
15: [0]  B [1]  B [5] [DVD-V]
e.g., 5: [0] 
B [5]
15: [1]  B [5]
STOP
PA U S E
SLOW/SEARCH
DMP-BD70V-RQT9412_ENG.book  20 ページ  ２００９年２月２７日　金曜日　午後７時２３分