Panasonic Dmp Bd755 Owners Manual

							Connections & Settings
11VQT3A92
The configuration of your network is about to begin.
Follow the on-screen instructions and make 
the settings with [3,4,2 ,1 ] and press 
[OK].
Network Easy Setting 
(Home Network Connection Check) Network Easy Setting (Internet Connection Check)
	≥
Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” 
in the Setup menu. ( >24)
≥ You can redo these settings individually using “Network Settings”. 
(> 24)
If you have more than one Panasonic player/recorder and 
the remote control operates both products at once, you will 
need to change the remote control code on one product to 
prevent this occurrence. ( >25, “Remote Control Code”)
Network Easy Setting
When you experience 
problems with settings
DisplayCheck the 
following
1. LAN cable connection Fail ≥Connection of 
the LAN 
cables ( >9)
2. IP address setting Fail
3. Connection to gateway Fail
1. LAN cable connection Pass
≥Connection 
and settings 
of the hub 
and router
≥ Settings of 
“IP Address/
DNS 
Settings” 
(> 24)
2. IP address setting Fail
3. Connection to gateway Fail
1. LAN cable connection Pass
2. IP address setting
Pass or 
Home 
network 
available
3. Connection to gateway Fail
OKRETURN
Network Easy Setting
The confirmation of a network connection and the
Internet functions (BD-Live etc.) accessibility is
conducted.
Is a LAN cable already connected ?
Please refer to the operating instructions for how
to connect to with a LAN cable.
A broadband Internet connection is necessary for
BD-Live.
Press [OK] to proceed.
OK
Network Easy Setting (Home Network Connection Check)
YesNo
Complete.
1. LAN cable connection         
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.
Fail
Fail
Fail
DisplayCheck the following
Cannot find the 
server.
(Error code: B019) ≥
“Primary DNS” and “Secondary 
DNS” settings of “IP Address/
DNS Settings” ( >24)
Failed to connect to 
the server.
(Error code: B020) ≥
The server may be busy or the 
service may have been 
suspended. Please wait a few 
moments, and then try again.
≥ Settings of “Proxy Server 
Settings” ( >24) and the router
Reprogramming the remote 
control
OK
Network Easy Setting (Internet Connection Check)Complete.
- Connection to the Internet          Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the owners manual for the cause of
the error and the solution for it.
Press [OK].
DMP-BD75_VQT3A92_eng.book  11 ページ  ２０１０年１２月１３日　月曜日　午前１０時１６分 
						

							12VQT3A92
Occasionally, Panasonic may release updated firmware for 
this unit that may add or improve the way a feature 
operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically 
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following 
message is displayed.
To update the firmware
Press [HOME] > select “Setup”  > select “Player 
Settings”  > select “Others”  > [OK]  > select “Firmware 
Update”  > [OK]  > select “Update Now”
DO NOT DISCONNECT the unit from the AC power or 
perform any operation while the update takes place.
After the firmware is installed, “FInISH” will be displayed on 
the unit’s display. Unit will restart and the following screen 
will be displayed.
	≥ If downloading on this unit fails or this unit is not connected to the 
Internet, then you can download the latest firmware from the 
following website and burn it to a CD-R to update the firmware .
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. ( >25, “System 
Information”)
≥ Downloading will require several minutes. It may take longer or 
may not work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set 
“Automatic Update Check” to “Off”. ( >25)
Firmware updates
New firmware is available.
Please update firmware in Setup.
The firmware was updated.Current Version: x.xx
RETURNOK
DMP-BD75_VQT3A92_eng.book  12 ページ  ２０１０年１２月９日　木曜日　午後９時０分 
						

							Connections & Settings
Playback
13VQT3A92
Playback
Inserting or removing 
media
≥When inserting a media item, ensure that it is facing the 
right way up.
≥ If you connect a Panasonic product with a USB 
connection cable, the setup screen may be displayed on 
the connected equipment. For details, refer to the 
instructions for the connected equipment.
HOME menu
Major functions of this unit can be operated from the HOME 
menu.
Preparation
Turn on the television and select the appropriate video input 
on the television.
1Press [ ÍPOWER] to turn on the unit.
2Press [OK] or [ 3,4 ,2 ,1] to select the 
item.
≥ When a media is inserted, contents selection screen 
for that media is displayed.
≥ If there are any other items, repeat this step.
≥ To return to HOME menu, select “HOME” or press 
[RETURN] several times.
To show the HOME menu
Press [HOME].
	≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when using a disc with 
both data files (MP3, JPEG, MKV) and Video. ( >22)
Videos/
Photos/
Music Disc
Play back the contents. 
(>
14, 17, 18)
≥ When multiple contents 
are recorded, select the 
types of contents or the 
title.
USB
Network Internet 
Content
Displays the home screen of 
Network Service (
>18)
DLNA Client
(> 19)
Setup Player 
Settings
(>
22)
USB 
Management
(> 16)
1
Music
Photos
Videos
NetworkBlu-ray Disc Player
HOME
Setup
DMP-BD75_VQT3A92_eng.book  13 ページ  ２０１０年１２月９日　木曜日　午後９時０分 
						

							14VQT3A92
Playing video contents
1Insert the media.
If the menu is displayed, press [3,4 ,2, 1] to select 
the item. ( >13)
2Press [ 3,4] to select the title and press 
[OK].
∫ To show menus
You can show Top Menu, Direct Navigator or Pop-up Menu.
Press [POP-UP MENU/TOP MENU].
≥Press [ 3,4,2,1] to select the item and press [OK].
∫To show the status messages
While playing, press [STATUS].
The status messages give you information about what is 
currently being played. Each time you press [STATUS], the 
display information may change or will disappear from the 
screen.
	≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. 
Press [ ∫STOP] when you have finished playback to protect the unit’s 
motor, your television screen and so on.
≥ Depending on media and contents, the display may change or may not 
appear.
≥ MKV : Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have 　
been dragged and dropped, copied and pasted to the media.
≥ To save on electricity, the power is turned off automatically if there is no 
button operation for about 30 minutes when not playing back (such as 
when paused, displaying the menu, displaying still pictures, etc.). 
(Compatible with ENERGY STAR)
These functions may not work depending on the media and 
contents.
Press [ ∫STOP].
The stopped position is memorized.
Resume play function
Press [ 1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press 
[∫ STOP] several times to display “StOP” on the unit’s 
display.
≥ On BD-Video discs including BD-J, the resume play 
function does not work.
Press [ ;PA U S E ] .
≥Press [ ;PAUSE] again or [ 1PLAY] to restart play.
Search
While playing, press [SEARCH 6] or 
[SEARCH 5].
≥Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [SEARCH 5].
The speed increases up to 5 steps.
≥Press [ 1PLAY] to revert to normal playback speed.
While playing or paused, press [ :] or 
[ 9 ].
Skip to the title, chapter or track you want to play.
≥Each press increases the number of skips.
While paused, press [ 1] (;1 ).
≥Press and hold to change in succession forward.
≥ Press [ 1PLAY] to revert to normal playback speed.
Press [AUDIO].
You can change the audio channel number or soundtrack 
language, etc.
BDDVDCDUSB
PlayBD (Video) T1     C1     0:05.140:20.52
e.g.BD-Video
Total time
Elapsed time in the title
Current position
T: Title, C: Chapter, PL: Playlist
Other operations during play
Stop
Pause
Search/Slow-motion
Skip
Frame-by-frame
Changing audio
VQT3A92~Body_eng.fm  14 ページ  ２０１０年１２月２２日　水曜日　午前１０時４４分 
						

							Playback
15VQT3A92
1Press [SUB MENU].
2Select an item, then press [OK].
While Direct Navigator screen is displayed
While playing
	≥Depending on the media and contents, displayed items are different.
∫ Displaying subtitle text
You can display subtitle text on the MKV video disc with this 
unit. The operation might be different or it may not operate 
properly depending on the way the file was made or the 
state of this unit (playing, stopped, etc.).
Set “Subtitle” in “Disc” ( >21)
	≥MKV  video files that do not display “Text” do not contain subtitle text.
≥ If the subtitle text is not displayed correctly, try changing the language 
settings. ( >22)
Useful functions
Vi ew 
PlaylistsTo play playlists.
View TitlesTo select the title.
Select 
FolderTo switch to another folder.
Top MenuTo display Top Menu.
Pop-up 
MenuTo display Pop-up Menu.
MenuTo  d i s p l a y  M e n u .
DMP-BD75_VQT3A92_eng.book  15 ページ  ２０１０年１２月９日　木曜日　午後９時０分 
						

							16VQT3A92
BD-Live allows you to enjoy more functions such as 
subtitles, exclusive images and online games by connecting 
this unit to the Internet. Since most of the BD-Live 
compatible discs are played back using the BD-Live 
function, additional contents are required to be downloaded 
into the external memory (local storage).
≥This unit is using a USB device as a local storage device. 
BD-Live function cannot be used when there is no USB 
device inserted.
1Perform network connection and 
settings. ( >9, 11)
2Insert a USB memory with 1 GB or more 
free space.
3Insert the disc.
∫Deleting data on the USB device
If you no longer need data recorded on the USB device, you 
can delete data with the following operation.
1 Insert a USB device.
2 Press [HOME].
3 Press [OK] to select “Setup”.
4 Press [ 1] to select “USB Management”.
5 Press [OK].
6 Press [ 2,1] to select “Yes” and press [OK].
7 Press [ 2,1] to select “Start” and press [OK]. To turn on/off secondary video
Press [PIP].
To turn on/off secondary audio
[DISPLAY] > select “Disc” > [
1 ] > select 
“Signal Type” > [OK] > set “Soundtrack” in 
“Secondary Video” to “On” or “Off”
	≥ The usable functions and the operating method may vary with each 
disc, please refer to the instructions on the disc and/or visit their 
website.
≥ Some BD-Live content available on the Blu-ray discs may require an 
Internet account to be created in order to access the BD-Live content. 
Follow the screen display or instruction manual of the disc for 
information on acquiring an account.
≥ “BD-Live Internet Access” may need to be changed for certain discs 
(> 22).
≥ When discs supporting BD-Live are played back, the player or disc IDs 
may be sent to the content provider via the Internet.
≥ During search/slow-motion or frame-by-frame, only the primary video is 
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to 
“Off”, secondary audio will not be played ( >23).
Enjoying BD-Live or 
picture-in-picture in BD-Video
Enjoying BD-Live discs with 
Internet
No. of Files    1
Free space    1844 MB
USB device
BD-Video Data Erase
OKRETURN
USB Management
Playing picture-in-picture
Secondary video
Primary video
VQT3A92~Body_eng.fm  16 ページ  ２０１０年１２月１５日　水曜日　午後７時３２分 
						

							Playback
17VQT3A92
Playing still pictures
(BD-RE, DVD-R/-R DL, CD-R/RW, USB device)
1Insert the media.
If the menu is displayed, press [3,4,2,1] to select 
the item. ( >13)
2Press [ 3,4 ,2 ,1 ] to select the still 
picture and press [OK].
Press [ 2,1] to display the previous or next still picture.
To exit the screen
Press [POP-UP MENU/TOP MENU].
∫ To show the still picture properties
While playing, press [STATUS] twice.
To exit the screen
Press [STATUS].
1Press [SUB MENU].
2Select an item, then press [OK].
While Photo View screen is displayed
While playing
	≥Depending on the condition of the unit and media contents, displayed 
items are different.
≥ When a still picture with large number of pixels is played, the display 
interval may become longer. Even if the setting is changed, the display 
interval may not become shorter.
BDDVDCDUSB
DIRECT NAVIGATOR
USB ( JPEG ) Photo View
SUB
MENU PlayRETURN
0001
0005
00090006 0007 0008 0002 0003 0004
Page  001/001
                                    
Photo     11/12/2007            Total        3/9
Shooting date
Useful functions
Select 
FolderTo select the still pictures in another folder.
Start 
SlideshowYou can display still pictures one by one at a 
constant interval.
Slideshow 
Settings
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Press [ 3,4,2,1] to select “Set” and 
press [OK].
Rotate RightRotate the still picture.R otate L eft
VQT3A92~Body_eng.fm  17 ページ  ２０１０年１２月２２日　水曜日　午前１０時４５分 
						

							18VQT3A92
Playing music
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1Insert the media.
If the menu is displayed, press [3,4 ,2, 1] to select 
the item. ( >13)
2Press [ 3,4] to select the track and press 
[OK].
1While the Direct Navigator screen is displayed
Press [SUB MENU].
2Press [ 3,4] to select “Select Folder” 
and press [OK].
	≥ You cannot select folders that contain no compatible tracks.
Enjoying Network Service
You can enjoy Network Service such as streaming movie, 
etc. (Current as of December 2010)
Preparation≥Network connection ( >9)
≥ Network setting ( >11 )
1Press [NETWORK].
≥NETFLIX can be accessed directly by pressing 
[NETFLIX] button.
2Press [ 1] to select “Internet Content”.
≥Message is displayed. Please read these instructions 
carefully and then press [OK].
3Press [ 3,4, 2,1] to select the item and 
press [OK].
Operable buttons: 
[ 3, 4,2,1], [OK], [RETURN], colored buttons, 
number buttons
The home screen;
To exit from Network Service
Press [EXIT] or [HOME].
	≥ When playing content from a disc and/or USB device Network Service 
cannot be accessed by pressing [NETWORK].
≥ Set “Lock” in “Internet Content Settings”, when restricting the use of 
Network Service ( >24)
≥ If using slow Internet connection, the video may not be displayed 
correctly. A high-speed Internet service with a speed of at least 6 Mbps 
is recommended.
≥ Be sure to update the firmware when a firmware update notice is 
displayed on the screen. If the firmware is not updated, you will not be 
able to use Network Service function. ( >12)
≥ Network Service home screen is subject to change without notice.
≥ The services through Network Service are operated by their respective 
service providers, and service may be discontinued either temporarily or 
permanently without notice. Therefore, Panasonic will make no warranty 
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be 
presented in specific languages.
Playing a track in another 
folder
DVDCDUSB
 0.09  4.30
001
002
003
004
005Music listNo.
Track Name Play Time Track01
Track01 4min30sec 
3min41sec 
4min30sec 
3min11sec 
5min 02sec 
Track025 Tracks / Total Play Time 20min54sec
Track03
Track04
Track05
DIRECT NAVIGATORCD
PlayRETURN
“ ” indicates the track currently playing.Network Service
Settings
Images are for illustration purposes, contents may 
change without notice.
VQT3A92~Body_eng.fm  18 ページ  ２０１０年１２月１６日　木曜日　午後６時５５分 
						

							Playback
19VQT3A92
Playing back contents on 
the DLNA server (DLNA)
You can enjoy viewing video, still pictures and music saved 
on a DLNA Certified media server connected to the home 
network with this unit.
– This feature is only supported by Windows 7 Operating system.
Preparation1 Perform network connection and network settings of this 
unit. ( >9, 11)
2 Perform Home Network settings of the PC.
≥ Add the contents and folder to the Windows Media
® Player 
library.
– Playlist of Windows Media
® Player can play back only 
the contents that are stored in the libraries.
1Press [NETWORK].
2Press [ 3] to select “DLNA Client”.
≥A list of equipment connected via the network is 
displayed.
≥ This list can be updated by pressing [R] on the remote 
control.
3Press [3 ,4 ] to select the equipment to 
playback the contents, and press [OK].
4Press [ 3,4,2 ,1 ] to select the item to 
playback (folder), and press [OK].
≥ You may be able to use convenient functions 
depending on the disc or content by pressing 
[SUB MENU] or [DISPLAY].
≥ Control Panel is displayed once 
the playback starts.
Operation can be performed 
with [ 3,4,2,1], [OK] and 
[EXIT].
≥ Press [OK] if the Control Panel 
is not displayed.
≥ Press [RETURN] to hide the Control Panel. To exit from Home Network
Press [EXIT], [HOME] or [POP-UP MENU/TOP MENU].
	≥
Menu structure will be different depending on the equipment connected 
to this unit. Select the contents by repeating the operation.
≥ Depending on the contents and the connected equipment, playback 
may not be possible.
≥ Items displayed in gray on the display cannot be played back by this 
unit.
≥ This unit cannot be played back via connected equipment.
≥ Depending on the performance of the connected PC, video frames may 
be dropped during playback, or video may not playback at all.
For details about the setting and operation method of 
connected equipment, refer to the following Website and 
the operating instructions for each item of equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Update
DLNA Client
OKRETURNServers found on the network are displayed.
Please select one. XXXXXX
e.g.
EXIT
Control Panel
e.g.
DMP-BD75_VQT3A92_eng.book  19 ページ  ２０１０年１２月９日　木曜日　午後９時０分 
						

							20VQT3A92
Linked operations with 
the TV 
(VIERA LinkTM “HDAVI ControlTM”)
Preparation
1Set “VIERA Link” to “On” ( >24). (The default setting is 
“On”.)
2 Set the “HDAVI Control” operations on the connected 
equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible equipment and 
select this unit’s input channel on the connected TV so 
that the “HDAVI Control” function works properly.
Also when the connection or settings are changed, 
repeat this procedure.
When play starts on the unit, the TV will automatically switch 
the input channel and display the corresponding action.
Additionally when the TV is off, the TV will automatically turn 
on.
All connected equipment compatible with “HDAVI Control”, 
including this unit, automatically turns off when you switch 
the television off.
	≥ This unit supports “HDAVI Control 1” function.
This standard is compatible with Panasonic’s conventional HDAVI 
equipment.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by 
HDMI which is an industry standard known as HDMI CEC (Consumer 
Electronics Control), is a unique function that we have developed and 
added. As such, its operation with other manufacturers’ equipment that 
supports HDMI CEC cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’ equipment 
supporting VIERA Link function.
Automatic input switching
Power on link
Power off link
What is VIERA Link “HDAVI Control”?
VIERA Link
TM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function 
that offers linked operations of this unit, and a 
Panasonic TV (VIERA) or amplifier/receiver under 
“HDAVI Control”.
You can use this function by connecting the 
equipment with an HDMI cable. See the operating 
instructions for connected equipment for operational 
details.
DMP-BD75_VQT3A92_eng.book  20 ページ  ２０１０年１２月９日　木曜日　午後９時０分