Panasonic Dmp Bdt100 Operating Instruction

Settings
31VQT2U33
Network Easy Setting (>13)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
Off Timer
To save on electricity, the power is turned off automatically if 
there is no button operation for a set time when not playing 
back (such as when paused, displaying the menu, 
displaying still pictures, etc.). (Compatible with ENERGY 
STAR)
Remote Control Code
Change the remote control code, when other Panasonic 
products react to this remote...

32VQT2U33
Reference
Troubleshooting guide
Before requesting service, please perform 
the following steps.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds.
≥ Image disturbance during search.
≥ Image disturbance when replacing 3D discs.
∫ Unit doesn’t respond to remote 
control or front panel buttons.
Press and hold [POWER  Í/I] on the main unit for 3 
seconds.
– If still unable to power the unit off, disconnect the power 
cord, wait 1 minute, then reconnect the power...

Reference
33VQT2U33
The images from this unit do not appear on 
the television.
Picture is distorted.
¾An incorrect resolution is selected in “Component Video 
Resolution” or “HDMI Resolution”. Reset the setting as 
follows:
1 While the unit is on, press and hold [OK], [B] and [Y] on 
the remote control at the same time for more than 
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1] (right) on the remote control or 
[POWER  Í/I] on the unit until “04 PRG” is displayed on...

34VQT2U33
Disc cannot be played.
¾The disc is dirty. (>4)
The contents of the USB device cannot be 
read.
¾USB devices connected usi ng a USB extension cable 
other than the supplied with the Wireless LAN Adaptor 
DY-WL10 (optional) or a USB hub may not be 
recognized by this unit.
¾If inserted during playback the USB device may not be 
recognized by this unit.
Still pictures (JPEG) do not play back 
normally.
¾The images that were edited on the PC, such as 
Progressive JPEG, etc., may not play back.
I...

Reference
35VQT2U33
Messages
The following messages or service numbers appear on the 
television or unit’s display when something unusual is 
detected during startup and use.
Cannot play.¾You inserted an incompatible disc (Discs recorded in 
PAL video, etc.).
Cannot display on this unit.¾You tried to play a non-compatible image.
¾Confirm “SD” on the unit’s display is not blinking and 
re-insert the card. 
No disc is inserted.¾The disc may be upside down.
$ This operation is not available.¾Some operations...

36VQT2U33
Audio Information
The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. 
(>29, Digital Audio Output)
≥ The number of channels listed is the maximum possible number of output channels.
HDMI AV OUT/DIGITAL AUDIO OUT
About audio from audio output terminals
TerminalHDMI AV OUTDIGITAL AUDIO OUT
“Dolby D/Dolby D +/Dolby 
TrueHD”/“DTS/DTS-HD” “Bitstream”*1
*1When the connected equipment is not supported with these audio formats,...

Reference
37VQT2U33
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the 
items.
Press [FUNCTION MENU] > select “Other Functions” > [OK] > select “Setup” > [OK] > select 
“Audio” 
>  Set each item
For details of the each item, refer to page 29.
Recommended audio output setting
Example of connected equipment
TV via HDMI*1Receiver with 
HD audio*2 decoder 
via HDMI
Receiver without 
HD audio*2 decoder 
via HDMIReceiver via  OPTICAL
Setup...

38VQT2U33
About MP3/JPEG/DivX/
AVCHD/MPEG2 files
	
≥With certain recording states and folder structures, the play order may 
differ or playback may not be possible.
≥ CD-R, CD-RW : ISO9660 level 1 or 2 (except for extended formats), 
Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
≥ DVD-R, DVD-R DL (except for AVCHD) : ISO9660 level 1 or 2 (except 
for extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660)
This unit is not compatible with...

Reference
39VQT2U33
You can play files on this unit by structure of folders as 
shown below. However depending on the method of 
writing data (writing software), play may not be in the 
order you numbered the folders. Folder which can be displayed with this unit
¢¢¢ : Numbers
XXX: Letters
*1¢¢¢: from 001 to 999*2¢¢¢: from 100 to 999
XXXXX: 5 figures
*3¢¢¢¢ : from 0001 to 9999
XXXX: 4 figures
*4The total combined maximum number of recognizable picture contents 
and folders: 3000 picture contents and 300...

40VQT2U33
Supplemental information
∫TV/Amplifier/Receiver code list
∫ Video attribute
∫ Audio attribute ∫
Display languages list
∫ Language code list
BrandTV Code
BrandAmplifier 
CodeReceiver Code
DisplayMeaning
MPEG-2/MPEG-4 AVC/VC-1Video recording method
DisplayMeaning
LPCM/ Digital/ Digital+/
TrueHD/DTS/DTS-ES Mtrx/
DTS-ES Dscrt/DTS 96/DTS 96 ES Mtrx/
DTS-HD HI RES/DTS-HD MSTR/MPEG
Signal type
ch (channel) Number of channels
k (kHz)Sampling frequency
b (bit) Number of bits
FUNAI
HITACHI
JVC
INSIGNIA...