Home > Panasonic > DVD Recorder > Panasonic Dmr Ea38 Operating Instructions Manual

Panasonic Dmr Ea38 Operating Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Dmr Ea38 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							21
    RQT9058
    Important Notes for Recording 
    [RAM] [VHS]
    Both Main and SAP audio are recorded.
    You can change the audio during playback (
    						
    							22
    RQT9058
    Advanced Recording
    DVD Recording Modes and Estimated Disc Recording Time
    EP (6H)2
    EP (8H)
    LP
    SP
    XP
    Recording time
    Picture quality
    1  It is not possible to record or play continuously from one side of a 
    double sided disc to the other.
    2  When “Recording Time in EP Mode” has been set to “EPExtended 
    Play (6H)” in the Setup menu (
    						
    							23
    RQT9058
    Important:
    Formatting permanently deletes all disc contents 
    (including computer data), regardless of protection status 
    of disc.
    [RAM] [-RW‹V›] [+RW]
    OK
    The following screen may 
    appear when inserting a new 
    disc, etc.
    Only format the disc if you 
    intend to use it for recording.
    Do not format if you intend to 
    view pre-recorded material from the disc.
     to select “Yes”, then OK
    [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
    Finalize
    Finalizing is necessary to enable playback
    of the disc on compatible DVD players.
    Once finalized, recordings cannot be added to the disc.
    It will take approximately 
     minutes. Start?
    this unit. You  can Finalize it later. Press “REC” to start finalizing.
    Press the OPEN/CLOSE button to postpone
    finalizing. The disc can be played only on
    After recording, if you 
    press [ OPEN/CLOSE] 
    to eject the disc, the 
    following screen may 
    appear.
    REC
     to start  nalizing.
    or
    OPEN/CLOSE  to eject the disc without 
     nalizing.
    When the format con rmation screen is 
    displayed
    When removing a recorded disc
     Notes
    You cannot stop  nalizing once you have started it.
     Tips
      If you want to provide the disc with a name or set play menu 
    select, select “Disc Name” (
    						
    							24
    RQT9058
    Specifying the Recording Time
    [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS]
    This function allows specifying the length of recording 
    time up to 4 hours.
    [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
    The unit sets the best possible picture quality that  ts the 
    recording within the remaining disc space.
    The recording mode becomes FR mode. Refer to “FR 
    (Flexible Recording)” (
    						
    							25
    RQT9058
    To cancel a scheduled recording in 
    progress
      
     to select “Stop recording”, 
    then 
    OK
    To release the unit from recording 
    standby 
    (Before recording starts)
    Check, Change, or Delete Programs
      
    –  See  “Tips”  (
    						
    							26
    RQT9058
    Preparation:
      Turn on the unit and connected equipment.
      [RAM] If the disc is protected, release protection 
    (
    						
    							27
    RQT9058
     Notes
      If the desired audio is not recorded, select the kind of audio for 
    “Select Audio Channel For DV Input” in the Setup menu (
    						
    							28
    RQT9058
    [DVD-V]
    Generally, menu screens that appear on the TV may be 
    navigated as follows:
    , , ,  to select an item, then 
    OK
    You can sometimes use the numbered buttons to 
    select an item.
    [RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
    Advanced Disc Playback
    Menu Screens on the TV
    Selecting Recordings to Play
    Search
    Direct Play
      During playback
     or 
    –  There are 5 search speeds. Each press increases 
    the search speed.
    –  Press [ PLAY] to restart normal playback.
     Notes
    If “” appears on the TV, the operation is prohibited by the unit or 
    disc.
     Tips
    To select the recording with the numbered buttons
    e.g., “5”:  [0] 
    						
    							29
    RQT9058
    [RAM] 
    Allows you to increase the play speed slightly without 
    distorting the audio.
    Quick View  (Play 1.3)
    During playback
    PLAY (Press and hold.)
    –  Press again to return to normal speed.
    [RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW]
    [DVD-V] [-RW‹VR›]
    [RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] 
    [DVD-V] [-RW‹VR›]
    Slow-motion Play
    Frame-by-Frame Viewing
    [RAM]
    [RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
    Use to skip in 1-minute or 10-minute increments.
    Time Slip
    Create Chapters
      
    ,  to select the time, then 
    OK
    –  Each press of  or  advances the interval 
    by 1 minute (press and hold for 10-minute 
    intervals).
     
    While paused
     or 
    –  There are 5 slow-motion speeds. Each press 
    increases the speed.
    –  Press [ PLAY] to restart normal playback.
    While paused
    OK
    –  Each press shows the next or previous frame.
    –  Press and hold to advance or reverse frame-by-
    frame in succession.
    –  Press [ PLAY] to restart normal playback.Available audio will differ based on disc type. 
    See below.
    e.g.: [RAM]
    “Stereo” is 
    selected.Play
    Stereo
    DVD-RAM
    [RAM] [-RW‹VR›]
    Stereo  Mono L  Mono R
     
    [RAM] [-RW‹VR›] When playing a multilingual broadcast, 
    you can choose between Main Audio and SAP Audio.
    Main Audio  SAP Audio
    [DVD-V\ 
    This allows you to change items like the audio channel 
    number and the soundtrack language (
    						
    							30
    RQT9058
    Playing Playlists
      
    DRIVE
     SELECT
     to select the DVD drive.
    With the unit stopped
      
      ,  to select “Playlists”, then
    OK
      ,  to select “Other Functions” 
    then 
    OK
    FUNCTIONSDVD-RAM
    Program
    CopyDelete
    Other Functions
    Disc Protection OffPlaylists
    DV Camcorder Rec.Flexible Recording
    SetupDVD Management
    OK
    Playback
      , , ,  to select the playlist 
    to play, then 
    OK
    Perform steps 14 above
      ,  to select “Properties”, then 
    OK
    –  Playlist information (e.g., length and date) is 
    shown.
    Playlist Properties
      , , ,  to select the playlist, 
    then 
    SUB MENU
    [RAM] [-RW‹VR›]
    You cannot create or edit playlists on this unit. However, 
    you can play a playlist that has been created or edited on 
    other equipment.View Chapters
    Perform steps 14 left.
      ,  to select “View Chapters”, 
    then 
    OK
      , , ,  to select the playlist, 
    then 
    SUB MENU
      , , ,  to select the 
    chapter, then 
    OK
     Tips
    To return to the playlist screen
    Press [SUB MENU], then select “View Playlists” and press [OK].
    To view other pages
    Press [,].
    %.3&71JOEC%.3&71JOEC 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Dmr Ea38 Operating Instructions Manual