Panasonic DP 3030 User Manual

							
41
Making Copies
Bin
●Electronic Shift-Sort
● When copying with Legal/Ledger
size, pull out the bin until it stops.
or
Reduction/
Enlargement
only
Number
of CopiesSort mode
or
or
When the optional 1-Bin Finisher is installed,
this screen will change as follows:
For DA-FS300
or or
1-Bin Finisher (DA-FS300)
243
Paper Size Non-Sort/Rotate Shift Staple ∗
Letter 500 500 10 to 30 Sheets: 45 to 16 Sets
(Max. 30 Sheets/Shift) 2 to 9 Sheets: 70 to 50 Sets
Legal, Ledger 250 250 10 to 20 Sheets: 25 to 12 Sets
(Max. 20 Sheets/Shift) 2 to 9 Sheets: 70 to 28 Sets
●
Paper Capcity  (20 lb Paper)
∗Ex: Letter Size
10 Sheets: 45 Sets
30 Sheets: 16 Sets
When overflow           indicator appears on the display,
remove excess copies from the bin, then press any
mode key on the control panel to reset.
oF
oF
●Overflow
Downloaded From ManualsPrinter.com Manuals 
						

							
42
Making Copies
Zoom/Effects
■ Zoom
Copies with variable zoom ratios from 25 %
to 400 % in 1 % increments.
25%
400%
or
■ Auto Zoom
The copy Zoom Ratio adjusts automatically to the
selected paper size.
Fit to paper length or width
Fit to paper length and width Opening the ADF
■
 Edge
Creates a blank edge.
or
■ Book
Eliminates dark inner binding shadows.
ATTENTION●If using the keypad to set the zoom ratio, press the CLEAR key first to \
reset the current zoom ratio.
When changing the paper size after setting the zoom ratio, use the PAPER TRAY button.
NOTE● For Auto  Zoom
An incorrect exposure may occur when there is a black line at the edge o\
f the original or an
image which the copier interprets as a black pattern in the skyshot mode\
.
An incorrect position detection of the original may occur when a strong \
light shines onto the
glass during skyshot mode.
Platen
Letter
Ledger Ledger
12
12
12
12
Downloaded From ManualsPrinter.com Manuals 
						

							
43
Making Copies
or
Same vertical and horizon-
tal ratio
25% - 400%
or
or Keypad Different vertical and
horizontal ratio
25% - 400%
or
or Keypad
or
Number
of Copies
Number
of CopiesFit to paper length or
width
Fit to paper length
and width
Paper Size
(Paper Tray)
or
Same vertical and horizon-
tal void value
5 - 99 mm
or
or Keypad Different vertical and
horizontal void value
5 - 99 mm
or
or Keypad
or
Number
of Copies
Number
of Copies5 - 99 mm
or
or Keypad
NOTE●
Zoom Ratio
If using the keypad to set the zoom ratio,  press the CLEAR key first to\
 reset the current zoom
ratio.
3
4
345
3
4
34
Downloaded From ManualsPrinter.com Manuals 
						

							
44
Making Copies
Zoom/Effects
■ Margin
Shifts image to right, left, up or down.
or
■ Centering
Copy image can be centered automatically on
selected paper.
Opening the ADF
■ Image Repeat
Creates continuous copy image on one sheet.
Minimum original size: 20 x 20 mm
Opening the ADF
The dotted line can be set to
“None” or “Print” by Function mode
(See page 59).
■ Inverse
Negative/Positive image can be created for
special effects.
or
NOTE● In Centering and Image Repeat mode, make copies with the ADF open.
● Remove the originals from the ADF before selecting the Centering and Image Repeat mode.
An incorrect position detection of the original may occur when a strong \
light shines onto the
glass during the Centering and Image Repeat mode.
Also an image which the copier interprets as a black pattern in the Cent\
ering and Image
Repeat modes.
12
12
12
12
Downloaded From ManualsPrinter.com Manuals 
						

							
45
Making Copies
or
Number
of Copies
or Keypad
Margin area 5 - 99 mm
If a part of the copied image
is missing when using the
Margin mode, change the
Margin Reduction setting to
Y
es. (See page 58)
Number
of CopiesPaper Size
(Paper Tray)
Number
of CopiesPaper Size
(Paper Tray)
Number
of Copies
34
34
34
3
Downloaded From ManualsPrinter.com Manuals 
						

							
46
Making Copies
Zoom/Effects
■ Stamping (Page Numbering)
Page numbers can be automatically stamped
on each page.
1/8-1-
ADF only ∗
■
 Stamping (Date Stamp)
The date can be automatically stamped on each
page.
ADF only ∗
■
 Stamping (Issue Number Stamping)
An issue number can be automatically stamped
on each page.
ADF only ∗
01/05/2003
001
NOTE∗When copying with the Stamping mode combined with N in 1 mode, the Stamp\
ing mode can be
used from the platen.
The page numbering
format can be changed in
function mode.
Default format is -n-.
(See page 59)
12
12
12
Downloaded From ManualsPrinter.com Manuals 
						

							
47
Making Copies
Number of Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
or
Stamping start page
From 1, 2 or 3
Number of Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
Changing the stamp date
Number of Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
Stamping the Issue Number
From 3rd page
From 2nd page
From 1st page
or
or
34
34
34
or
Keypad
Downloaded From ManualsPrinter.com Manuals 
						

							
48
Making Copies
Insertion/Overlay
OHP2
21
+(2)(1)
+
OHP(2)OHP2OHP(1)(2)(1)21
+(2)(1)
+
OHP1
OHP1
OHP2
21
+
OHP(2)OHP2OHP(1)(2)(1)21
+
OHP1
OHP1
+
+
Insertion Insertion
■
 Cover
Adds Cover Page(s) to copies.
Blank page
Copied page
2
211+
3243+4
121
Original Blank
page
Original Copied page Copied
page
ADF only
■
 Page Insertion
Inserts Blank/Copied pages between copies.
Blank page
Copied page
Original Blank
page
Original Copied page
ADF only
■ OHP Interleaving
Inserts Blank/Copied pages between OHP film.
Blank page
Copied page
Original Blank
page
Original Copied page
ADF only
■ Presentation
Inserts Blank/Copied pages between OHP film
and make copied sets for handouts.
Blank page
Copied page
Original Blank
page
Original Copied
page
ADF only
NOTE● Certain types of transparency film may not be compatible and may damage \
your machine.
Consult with an authorized Panasonic dealer for advice regarding non-sta\
ndard paper types.
(Panasonic has tested  3M PP2500 transparency film and found it to be\
 compatible.)
Hand-
outs
Hand-
outs
12
12
12
12
Downloaded From ManualsPrinter.com Manuals 
						

							
49
Making Copies
Paper Size∗
Paper Tray
Cover Page mode
Cover (Front) Cover (Front+Back)
Blank
CopyNumber of Copies
(Max. 999)
Paper Size∗
Paper Tray
Page Insertion mode
Blank
CopyNumber of Copies
(Max. 999)
Paper Size ∗
Paper Tray
OHP Interleaving mode
Blank
Copy
Number of Copies
(Max. 999)
Paper Size ∗
Paper Tray
Presentation mode
Blank
CopyNumber of Copies
for handouts
(Max. 999)
Set the insert page position with
Keypad∗∗
If selecting other position, move
the sheet with 
 /  button, then
set the insert page position with Keypad
NOTE∗The size and orientation of the printed copy and recording paper should \
match.
∗∗Blank page to be inserted before the indicated selected page number.
Load OHP film onto
the Sheet Bypass
Load OHP film onto
the Sheet Bypass
34
345
435
435
Downloaded From ManualsPrinter.com Manuals 
						

							
50
Making Copies
Insertion/Overlay
■ Overlay
Overlays a second image onto the first by using
a second original.
1st-page
■ File Edit
Up to three ∗
 editing functions
available in the Form Overlay
feature.
∗ :T o Add a new file ∗
(HDD = Max. 5 files)
∗ :T o Erase a
registered file
∗ :T o Change the
title of a file
or
(Register only)
Select a file
■  Form Overlay
Overlay an image stored in memory onto the copy.
or
File
NOTE● The File Edit function for selecting a file is only available when the o\
ptional Hard Disk Drive and
Image Memory (See page 71) is installed.
When the optional Hard Disk Drive is not installed, only one file can be\
 selected.
● When an overlay image is not stored in memory, Form Overlay function is not selectable.
or
∗One image file can be registered.
With the optional Hard Disk Drive (DA-HD30)
installed, up to 5 image files can be
registered.
If the selected File Key already contains a
registered file image, the new image will
overwrite the current image.
12
123
12
∗∗
∗∗Without the optional Hard Disk Drive (HDD)
installed: After pressing the FILE EDIT button,
the machine skips Step 3 and proceeds to
Step 4 (Erase Mode).
Downloaded From ManualsPrinter.com Manuals