Panasonic Dvd Player Receiver Cq Vd7001 Installation Safety Information Manual

4243
CQ-VD7001W
CQ-VD7001W
Settings 
(continued)
[MENU]
[MODE]
[]] [[] [}] [{]
[ENTER]
: Previous menu
: Previous menu: Quit
: Quit: Select/adjust
: Select/adjust : Determine
[MENU]
[MODE]
[]] [[] [}] [{]
[ENTER]
: Previous menu
: Previous menu: Quit
: Quit: Select/adjust
: Select/adjust : Determine
NAVI SETUP 
(Navigation set up)
Navigation Setting
:Front Left/Right speaker
: Front Left only
: Front Right only
default: 
BOTH
R chL chBOTH
(Navigation Speaker)
NAVI SP
Preparation:Connect the navi mute...

4445
CQ-VD7001W
CQ-VD7001W
Settings 
(continued)
[MENU]
[MODE]
[]] [[] [}] [{]
[ENTER]
: Previous menu
: Previous menu: Quit
: Quit: Select/adjust
: Select/adjust : Determine
[MENU]
[MODE]
[]] [[] [}] [{]
[ENTER]
: Previous menu
: Previous menu: Quit
: Quit: Select/adjust
: Select/adjust : Determine
PAL/NTSC SELECTPAL/NTSC selection
: sets NTSC in accordance with the equipment
connected to VTR-IN. 
: sets PAL in accordance with the equipment
connected to VTR-IN. 
default: 
: sets NTSC in accordance with...

4647
CQ-VD7001W
CQ-VD7001W
Settings
(continued)
ENTER
TILT
O/C
ASP
MUTEMODE MENU
CQ-VD7001U
NAVI
OPEN / CLOSE
EJECT NAVIGATION ASPECT
POWER
VOLP·MODE
DISCOPEN / CLOSE
CQ-VD7001W
TILT
TEXTTUNE /
TRACK
❑
Aspect Ratio
Default: NORMAL
Mode: 4 typesPress and hold [ASP]on the display unit or [A]on the
remote control to change the aspect ratio as follows.
¡The conventional display image
has a 4 to 3 ratio of horizontal to
vertical.
¡In this case, a blank area
remains on the right and left
sides of the display....

4849
CQ-VD7001W
CQ-VD7001W
Trouble Shooting■Common
Problem
Possible cause
aPossible solution
The safety device works.
aConsult your dealer, or your nearest Panasonic Service Center.
The power of the unit
fails unintentionally.The plus and minus terminals at right and left channels of speakers are con-
nected reversely.
aPerform the speaker wiring in accordance with the wiring diagram.The sound field is not
clear in the stereo
mode. Central sound is
not settled.The speaker wiring is reversed between right...

5051
CQ-VD7001W
CQ-VD7001W
Trouble Shooting 
(continued)
■
MP3/WMANote:
¡Refer to “Notes on MP3/WMA” (apage 24)■
DVD■
Car Navigation, VCR, Camcorder, Rear View Camera, Rear Monitor
AUTO
(AUTO) is not selected as the rear monitor setting.
aSelect  
AUTO
(AUTO) for the setting.
The picture or the
sound of the rear moni-
tor is not switchable.
Rear view camera is not connected correctly.
aConnect a rear view camera correctly.Input setting of camera is not correct.
aCorrect the input setting.
The picture...

5253
CQ-VD7001W
CQ-VD7001W
Trouble Shooting 
(continued)
❑
Error Display Messages
Note:¡There may be cases when the disc numbers affected by an error are displayed before E1 and E2.¡Displays and the steps to be taken for errors vary in part from changer to changer. For details, refer to the Operating
Instructions for the changer used.■CD/MP3/WMA/DVD/VCD (Video CD)/CD Changer/DVD Changer
An attempt was made to play a disc with a region number other than “3” or
“ALL”.
aPress [u] and check the disc.
REGION...

5455
CQ-VD7001W
CQ-VD7001W
Notes on Discs
Language Code List
8277 Rhaeto-Romance8279 Romanian8285 Russian8365 Sanskrit8368 Sindhi8372 Serbo-Croatian8373 Singhalese8375 Slovak8376 Slovenian8377 Samoan8378 Shona8379 Somali8381 Albanian8382 Serbian8385 Sundanese8386 Swedish8387 Swahili8465 Tamil8469 Telugu8471 Tajik8472 Thai8473 Tigrinya8475 Turkmen8476 Tagalog8479 Tonga8482 Turkish8484 Tatar8487 Twi8575 Ukrainian8582 Urdu8590 Uzbek8673 Vietnamese8679 Volapük8779 Wolof8872 Xhosa8979 Yoruba9072 Chinese
9085...

5657
CQ-VD7001W
CQ-VD7001W
Definition of TermsDolby Digital
This fully discrete format divides the music signals
into 5.1 channels: Front Left (L), Front Right (R),
Center (C), Left Surround (LS), Right Surround (RS)
and Subwoofer (SW: 0.1 channel) for recording and
playback. The number of channels that are recorded
depends on the software. (1 to 5.1 channels)
Dolby Pro Logic
This format records signals from four channels [Front
Left (L), Front Right (R), Center (C), and Monaural
Surround (S)] in two...

59
CQ-VD7001W
Transportation bracket
removalBe sure to remove the transportation brackets
before use (installation). Use screws (
5 mm
øx 
6 mm) with washers for installation. 
Be careful not to lose these screws.
Round Head Screw
(5 mm
øx 6 mm)
Round Head Screw
(5 
mm
øx 6 mm)
Transportation
Bracket Transportation
Bracket
58
CQ-VD7001WInstallation
Preparation
Dashboard Installation
¡Before installation, check the radio operation with anten-
na and speakers.
¡Disconnect the cable from the negative (–)...

61
CQ-VD7001W
60
CQ-VD7001WInstallation 
(continued)
135624
❏Installation Procedures (When using Mounting Collar w)
Mounting the Display Unit
Insert the Mounting Collar winto the dashboard, and
bend the mounting tabs out with a screwdriver.
Establish the rear connection of the unit.
After fixing Power Connector 
!3
, 
fix the rear of the unit to
the car body by either method (a) or (b) shown at right.
Insert Trim Plate q.
After installation 
reconnect the negative
(–) battery terminal. Attach the...