Panasonic Dvd Vcr Deck Pv D4732 Operating Instructions

							21
Insert a tape with a record tab (p. 6).
1DECK power comes on.
The VCR mode and “VCR” indicator light up
on Multi Function Display.
54 2
3
Press CH , or NUMBER keys
to select the channel.
For “LINE” input, see p. 35.
If channel is over 100, press 100 key then press
the remaining 2 digits.
Press SPEED
to select the record speed (p. 6).
SP = Standard Play            LP = Long Play
SLP = Super Long Play
Press REC
to start recording.
(The VCR REC indicator lights up on Multi Function
Display),
To edit out unwanted scenes, press PAUSE/STILL
to pause, and again to resume recording.
You cannot view another channel during recording.
Press STOP
to stop recording.
It is not possible to record from DVD/ VideoCD/ CD to VHS tape using DECK.
Watching one channel and recording another
is not possible when using Cable Box or
DSS Receiver.
After 5 minutes in Pause mode, DECK stops to
protect a tape and video heads.
Speed appears on-screen and on Multi Function Display.
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Record on a Tape
Remove loose or peeling
labels from tapes to prevent
tape jam.
Multi Function Display
Record using DECK buttons
4
2
Select
Channel.
VCR/TV
Press REC
to start
Recording.
Press STOP/EJECT to stop.
This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment. Only use
tapes with the 
 mark. Only tapes
tested and inspected for use in 2, 4, 6,
and 8 hour machines are
recommended.
Normal Rec0:301:00
1:302:003:004:00
1Insert a tape.
Note
Notes
Basic
Operation
One Touch  Recording (recording in progress),➛ ➛➛ ➛
➛Press REC repeatedly to set the recording length
➛ ➛➛ ➛
➛(30 min. ~ 4 hours).
 DECK shuts off after the preset record length.
Record one station, watch another,➛ ➛➛ ➛
➛press VCR/TV
(“VCR” goes out on Multi Function Display),
➛ ➛➛ ➛
➛select channels at TV (recording continues).
Select Channels at DECK (In STOP or
REC. PAUSE mode),
➛ ➛➛ ➛
➛press VCR/TV
(“VCR” lights up on Multi Function Display),
➛ ➛➛ ➛
➛select channels at DECK.
Play a disc while recording a tape.➛ ➛➛ ➛
➛insert a disc during recording,
➛ ➛➛ ➛
➛press DV D, and then press PLAY.
PV-D4732S P1-25 (2nd) [LSQT0618B].p65 2002/05/23, 18:1221 
						

							22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Basic DVD Operation
Ready Checklist
All connections are made. (pp. 12 ~ 15)
DECK is plugged in.
If DECK is connected to an audio amplifier,
turn the stereo system’s power on.
*1Interactive DVD...
May include multiple camera angles,
stories, etc.
*
2Video CD with playback control...
Particular scenes or information can be
interactively selected from a menu that
appears on the screen.
Operation using DECK buttons
Press PLAY. Insert a disc.
Press
OPEN/CLOSE.
Press STOP.
6Press
POWER
4
1
33, 7
OPEN/
CLOSE
   10 MENU
SETFF/
SLOW+
STOP
RETURN
POWER
REW/
SLOW-
NUMBER
keys
TITLE PLAYDVD
PAUSE/
STILL
SELECT 
SURROUND
SKIP SKIP 
5Press   orNUMBER keys (see
below) to select title,
and
press 
SET to play.
1Press POWER* on the remote or DECK.
Press
 DVD to select DVD mode.
Press 
OPEN/CLOSE,
and then place a disc into the disc tray.
2
3If a disc is already inserted, go to step 4.
(Depending on the disc, playback may
start automatically.)
Press PLAY to start playing.
Disc tray closes automatically.
4
12
If an interactive DVD*1 or
a Video CD with playback
control*
2 is used and TITLE
MENU appears, go to step 5.You may also close tray by
pressing 
OPEN/CLOSE.
Data reading time differs with
each disc.
Using NUMBER keys starts playing automatically.
 1 digit number 1  1
2 digit number 12     10 1 2
3 digit number 123 100 1 2 3
Press 
SKIP | or | to go to next or previous
menu screen.
SKIP function not available with all discs.
Please refer to disc jacket for operation information.


To return to menu (play stops)Press TITLE, MENU, or RETURN. (DVD)
Press RETURN. (Video CD)
Press STOP to stop playing.6
7Press OPEN/CLOSE to eject the disc.
Hold disc by its edges
only (p. 4) with printed
side up and use guides to
place into tray.
Use     3”(8 cm)
or      5” (12 cm) disc.
2
1
CLOSE
READING
T I TLE  MENU
Cas t l es
Love
 r s
Dogs
B
 i r ds
T I TLE  MENU
Cas t l es
Love
 r s
Dogs
B
 i r dsDogs
of  the  world
PV-D4732S P1-25 (2nd) [LSQT0618B].p65 2002/05/23, 18:1222 
						

							23
Please read the disc jacket for operation
information.
If a single sided disc is placed in upside
down, “PLEASE CHECK THE DISC, AND
FOR STAINS OR SCRATCHES ON
DISC” is displayed.
Remove disc and press DECK POWER
off when not in use.
Disc continues to rotate with menu
displayed even after play is done.
Press STOP to clear menu display when
finished with menu.
Forward/Reverse Scene Search
Press FF/SLOW+ or REW/SLOW-during play.
Press 
PLAY to release.
Starting forward/reverse search during play
started from menu on Video CDs may recall
menu.
Search speed, slow at first, increases with each
additional press of the button up to 5 levels.
Forward/Reverse Chapter/Track Skip
Press SKIP | or | SKIP during play.
Each press skips a chapter (DVD) or
track (Video CD/CD).
Pressing | SKIP once midway through a
chapter/track returns to the start of that
chapter/track. Each additional press skips
back one chapter/track.
Pressing SKIP | or | during play started
from menu on Video CDs may recall menu.
Still Picture or Pause
Press PAUSE/STILL during play.
Press 
PLAY to release.
DVD/Video CD :DECK will enter still picture
mode.
CD : DECK will enter pause mode.
Frame by Frame Picture
(DVD/Video CD)
Press 
PAUSE/STILL in still mode.
Press 
PLAY to release.Each press advances picture one frame.
Hold button down for consecutive frame advance.
Whether pictures are advanced by “FRAME” or
“FIELD” is selected automatically. (See p. 47)
Slow Motion Picture (DVD/Video CD)
Press 
FF/SLOW+ or REW/SLOW-
in still mode.
Press 
PLAY to release.
Slow motion speed, slow at first, is increased
with each additional press of the button up to
5 levels.
Reverse slow motion is not available for Video
CDs.
When 
 appears on the screen while a button
is being operated, it means that the
corresponding operation is prohibited by DECK
or the disc.DECK memorizes the point where STOP is
pressed ( 
 flashes on screen).
Press 
PLAY to resume play from this point.
Pressing STOP again or opening the tray
cancels RESUME, however, RESUME is not
canceled when power is turned off and on.
RESUME works only with discs for which
elapsed play time is displayed during play.
Resume Function
Notes
Power turns off after DECK has been in
Stop mode (DVD) for about 5 minutes.
Auto-Power Off Function
1. Do steps 1-4 (previous page).
When menu appears, press STOP.
2.Press 
NUMBER keys to select desired
track (play begins).
Check disc for track numbers.
Press “1” to start at beginning of disc.
To Resume Menu use,
Press STOP and press PLAY, then the
menu will be displayed.
Now, go to step 5 (previous page).
Enjoy Video CDs featuring
playback control without using
menus (Video CDs only)
*Important:If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
Surround Sound System
Press SURROUNDto set Surround sound.
To cancel,
press 
SURROUND.
Surround sound effects is available in
DVD mode only.
Note
SURROUND ON
SURROUND OFF
Reverse  Skip                  Forward SkipCurrent playback position
Chapter/Track Chapter/Track Chapter/TrackChapter/Track
Basic
Operation
ps)RN. (DVD)
PV-D4732S P1-25 (2nd) [LSQT0618B].p65 2002/05/23, 18:1223 
						

							24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Timer Recording
ADD/DLT
Press PROG*
to display Program.
Press PROG
to end programming.
3 1
DAILY
131
31
12
SELECT     /      
Selection Order
WEEKLY
(SAT)WEEKLY
(MON) WEEKLY
(SUN)
14
Example
Today
2) To set remaining items,
press 
to select and
press SET
to set START/ STOP times,
CH(channel) or LINE input
(p. 35), and tape speed
(SP, LP, SLP).
To Enter More Programs,
press 
to select and
press SET
to set an unused program
number, and then repeat
step 2.
Or
Press PROG
to exit.1) To set record DATE,
press 
 to select:
1~31= one time, or
DAILY= MON~ FRI, or
WEEKLY= same time
each week and
press SET.
See selection order left.
SESELE CT  START  DATE
13  SUN --:--  --:--   --TODAY DATE START ST
OPCH
SLP
SELE
CT :         SET       : SET    END       :  PROG   
- - - - - - - - -- - - - - - - -- - - - - - - 
DT   START     STOP    CH   SPD13   10 : 00 P  12 : 00 P   02         SP--  -- : --     -- : --  --    --
--  -- : --     -- : --  --    --
--  -- : --     -- : --  --    --CANCEL         : ADD / DLT  SELECT 1-8 :         ENTER          : SET    EXIT             : PROG  
POWER
SET
PROG
SELECT 
Ready Checklist
All connections are made (pp. 12 ~ 15).TV and DECK are plugged in.Clock set correctly.Tape has rec.tab. (p. 6)Remote is in VCR mode. (Press VCR.)Sufficient tape remaining for rec time.
The “Timer” Indicator lights up on DECK.
You can do Timer Recording with the power on or off.
“TIMER REC WILL START SOON” appears on-screen for 2 minutes
before Timer Recording starts. If DECK is in DVD mode, no message
appears, but the VCR REC Indicator, the VCR mode indicator and
“REC” will flash on Multi function Display.VCR REC Indicator
VCR mode Indicator
A
M VCR
VCR RECDVD
ANGLEVCR
Hi-FiTIMER 
   
 
Multi Function Display
TIMER Indicator
2
PV-D4732S P1-25 (2nd) [LSQT0618B].p65 2002/05/23, 18:1224 
						

							25
To Replace program...
To Clear program...
Review, Replace or Clear Program Contents:
(Recording is not in progress)
or
Important notes when using DSS Receiver
When recording programs via DSS Receiver, DSS Receiver must be left on.
When recording programs via an antenna or cable, DSS Receiver must be turned off.
CANCEL   : ADD / DLT SELECT   1-8 :               
ENTER     : SET
EXIT         : PROG
DT   START     STOP    CH   SPD  7     9 : 00A  12 : 00A   08      SP  8   10 : 00P  12 : 00P    02     SP10     8 : 00P    9 : 00P   10     SP
SU     9 : 00P  10 : 00P    L1     LP
CANCEL   : ADD / DLT SELECT   1-8 :               
ENTER     : SET
EXIT         : PROG
DT   START     STOP    CH   SPD--  -- : --    -- : --   --   --  8   10 : 00P  12 : 00P    02     SP10     8 : 00P    9 : 00P   10     SP
SU     9 : 00P  10 : 00P    L1     LP
Press ADD/DLT. *Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
1
2
3
Press to select number and
press SET
to display.
To cancel a Timer
Recording in progress...
Repeat Step 2 (p. 24)
to set new programs.
Press PROG
to end the programming.Hold down STOP on VCR mode for
a few seconds to cancel the Timer
Recording.
 (The “TIMER” Indicator goes out
on Multi Function Display.)
Any future daily or weekly recording
will be performed as programmed.
7  SUN   9:00A  12: 00A  08 TODAY----------------------------------------
DATE       START       STOP       CH
SPSELE CT  START  DATE
SELECT     :         SET           : SET            BACK :END            : PROG   
Notes
If you are using a Cable Box, the VCR’s channel for Timer Recording must be set to
the Cable Box intput channel and Cable Box must be manually set to the desired
channel. Cable Box power must be left on.
2 minutes before Timer Recording is performed, “PLEASE PREPARE FOR TIMER
REC” appears and Timer Indicator flashes.
Be sure a cassette with record tab is loaded and DECK is in Stop mode.
If a power interruption occurs while programming the timer, the timer program(s) may be
canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION”
appears on-screen, please re-enter the timer programs.
If the star t time for Timer Recording comes up during recording and playing back,
Timer Recording will not be performed.
Press PROG
to display Program List.
4
VCR
 Operation
PV-D4732S P1-25 (2nd) [LSQT0618B].p65 2002/05/23, 18:1325 
						

							26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
MONO broadcast
Normal monaural sound broadcast.
SAP broadcast
Secondary Audio Program (sub
language) broadcast. Select SAP
audio mode for the sub language.
MTS Stereo broadcast
Multi-channel Television Sound
Stereo broadcast. Select STEREO
audio mode.
If stereo broadcast is weak and
display flickers, select MONO audio
mode for possible better results.
MTS Stereo and SAP broadcast
Multi-channel Television Sound
Stereo (main language) and
Secondary Audio Program (sub
language) broadcasts are being
received simultaneously.
Select STEREO or SAP audio mode. The following are possible audio broadcast types and on-
screen displays.
The signal being received is indicated with an “
” mark
while the selected audio mode is indicated with an arrow.
Receivable Broadcast Types
MTS Broadcast/  VHS Hi-Fi Stereo System
Equipped with ®-TV
Noise Reduction for
true MTS reproduction.
®-TV Noise
Reduction is required
for good stereo
separation and audio
fidelity. 
® is a
registered trademark,
and is licensed by 
®
Technology Licensing.
Connection
Make the Audio/Video Connection as shown on pp. 12 ~ 15.
 You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV.
To display the broadcast signal being received,
➛ ➛➛ ➛
➛ press DISPLAY*.
AUDIO
(SAP/Hi-Fi)
DISPLAY
STOP       1 2 : 0 0AMCH  02   0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP       1 2 : 0 0AMCH  02   0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP       1 2 : 0 0AMCH  02   0 : 0 0 : 0 0 SPSTEREOSAPMONO
STOP       1 2 : 0 0AMCH  02   0 : 0 0 : 0 0 SPSTEREOSAPMONO
PV-D4732S P26-35 (2nd) [LSQT0618B].p65 2002/05/23, 18:1326 
						

							27
Audio Mode for Recording
1
2
Do a recording.
See p. 21.3
Audio Mode for Playback
Start playback.
See p. 20.
Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard
stereo tapes will playback in monaural sound.
To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to
a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14, 15.)
If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
Hi-Fi and normal audio playback volume level may differ.Arrow indicates
selection.Refer to “Receivable Broadcast Types” on p. 26.
Arrow indicates selection.
Select “HIFI (L/R)” or “HIFI (L)” or “HIFI (R)” to listen to stereo
recordings in stereo sound.
Select “NORMAL” for monaural sound.
Display disappears after 5 seconds.
Press AUDIO (SAP/Hi-Fi)
to display audio mode.
(Display disappears after 5 seconds.)
Press AUDIO (SAP/Hi-Fi) repeatedly
to select desired mode.
Press AUDIO (SAP/Hi-Fi)
to display audio mode.
Press AUDIO (SAP/Hi-Fi) repeatedly
to select desired mode.
STEREOSAPMONO
Notes*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
VCR
 Operation
1
2
3
H I F I : L / RH I F I : L H I F I : RNORMAL
PV-D4732S P26-35 (2nd) [LSQT0618B].p65 2002/05/23, 18:1327 
						

							28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Multi-Brand Control Feature
The Remote Control can be set to control some TV and
Cable Box/DSS functions.
Find your TV and Cable Box/DSS Receiver
Brand Code Number on the following page.
Setup for TV control,➛ ➛➛ ➛
➛hold down TV button,
➛ ➛➛ ➛
➛enter code with NUMBER keys.
Multi-Brand Control Setup
Confirm code entry,
➛press POWER to turn selected unit on or off.
 See table below for controllable functions in each mode.
Setup for Cable or DSS control,➛ ➛➛ ➛
➛hold down DSS/CABLE button,
➛ ➛➛ ➛
➛enter code with NUMBER keys.
If code number is 100 or greater,
➛e.g., press 1 - 0 - 2 for 102.
3 1
Repeat setup after remote battery replacement.
Remote will not control every TV, Cable Box, or
DSS made by the manufacturer listed. If you get
no response, your particular unit cannot be
controlled. There are NO additional codes for the
products listed. If your product is not listed, then
the remote is not compatible with that product.Notes
2
ModeUnitDVD/VCR TV
DVD/VCR
TV
All
POWER, INPUT,
NUMBER keys,
ENTER,
CH 
/,
VOL +/-
EJECT/OPEN/CLOSE  *,DISPLAY, PLAY, STOP,
FF/SLOW+, REW/SLOW-,
VCR/TV, PAUSE
/STILL, SKIP,AUDIO, CM/ZERO,
TAPE POSITION,
COUNTER RESET , SPEED,
REC After remote is set up, you can select VCR, DVD, TV, or
DSS/CABLE for the desired function.
Press VCR, DVD, TV, or DSS/CABLE on the remote.(Table below shows available remote buttons for each mode.)
CABLE/ DSS
Using Multi-Brand Control
CABLE/
DSSPOWER, ENTER,
NUMBER keys
(except 100key),
CH 
/
Not all functions listed may be controllable.
In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing
NUMBER keys for channel selection.
Notes
VOL +/-
VOL +/-
*
 Bold: VCR FunctionBold Italic: VCR and DVD Functions
   Italic: DVD FunctionNormal: TV, Cable Box or DSS Receiver
DSS/
CABLE POWER
ENTER
NUMBER
keys
TV
VCR
DVD
PV-D4732S P26-35 (2nd) [LSQT0618B].p65 2002/05/23, 18:1328 
						

							29
Due to changes in infra-red commands used by manufacturers, some brands have several
codes. If your unit does not respond to the first code, please try the next one.
Some TV, Cable Box and DSS Receiver brands require you to turn on the power manually.
Cable Box Brand Code Numbers
Panasonic .......................01, 02
Quasar ............................01, 02
RCA ....................................... 03
GE ......................................... 03
Zenith .................................... 04
Magnavox .............................. 05
TV Brand Code Numbers
Sylvania ................................ 05
Sharp...............................06, 07
Sony ...................................... 08
Toshiba ................................. 09
Sanyo.................................... 10
Fisher .................................... 10JVC ........................................ 11
Hitachi................................... 12
Mitsubishi ........................07, 13
Samsung ............................... 14
Gold Star...................15, 16, 17
DSS Brand Code Numbers
Important Notes
Archer ......................... 44, 06, 01, 120, 05, 63, 126
Cableview................29, 09, 01, 63, 120, 44, 42, 30
                                                52, 04, 124, 126
Citizen...................44, 52, 30, 63, 42, 04, 124, 126
Curtis.....................................08, 09, 25, 61, 53, 87
Century ......................................44, 51, 75, 59, 126
Cabletenna .................. 29, 09, 01, 63, 120, 44, 126
Cable Cinema.............. 29, 09, 01, 63, 120, 44, 126
Diamond...................... 29, 09, 01, 63, 120, 44, 126
Eagle.......................62, 40, 22, 13, 58, 20, 26, 107
Eastern...................................................28, 29, 130
Explorer ..................................08, 09, 25, 61, 53, 87
Gemini.....................................................30, 04, 124
General Electric......................................01, 57, 120
General Instruments . 01, 84, 83, 34, 03, 02, 04, 55
   65, 66, 67, 68, 120, 106, 121, 122, 115, 117, 118, 124
Gerrard ...............................................44, 51, 75, 59
GC Electronics ...............44, 42, 63, 29, 30, 52, 04
                                                           124, 126
Hamlin...............41, 14, 15, 28, 102, 104, 103, 130
Hitachi................................................................... 31
Jerrold..........01, 84, 83, 34, 03, 02, 04, 55, 65, 66
       67, 68, 120, 106, 121, 122, 115, 117, 118, 124
Jasco......................................................30, 04, 124
Macom................................................................... 31
Magnavox ......................................................26, 112
Matsushita.................................17, 16, 08, 87, 109
Movietime ......................32, 39, 42, 44, 126, 38, 40
Maestro ...........................................................74, 35
NEC ....................................................40, 19, 38, 32
NSC ....................................................40, 19, 38, 32
Novavision .............................08, 09, 25, 61, 53, 87
Next Level........... 01, 84, 83, 34, 03, 02, 04, 55, 65
                             66, 67, 68, 120, 106, 121, 122
Oak .................................................46, 11, 129, 101Oak Sigma.....................................46, 11, 129, 101
Panasonic ..................................17, 16, 08, 87, 109
Philips ...................23, 24, 20, 13, 07, 50, 128, 129
Pioneer ......................................................06, 05, 12
Pulsar ....................04, 42, 63, 44, 30, 52, 124, 126
Quest ........................................................06, 05, 12
Radio Shack...............................44, 51, 75, 59, 126
RCA ............................................17, 16, 08, 87, 109
Realistic .....................................44, 51, 75, 59, 126
Recoton ......................................44, 51, 75, 59, 126
Regal.................41, 14, 15, 28, 102, 104, 103, 130
Regency ..................................................28, 29, 130
Rembrandt.......44, 42, 63, 29, 01, 32, 39, 120, 126
Samsung ......................................42, 06, 32, 05, 40
Scientific Atlanta...................08, 09, 25, 61, 53, 87
Sheritech ............................................................... 27
Signal ............................................................26, 112
SL Marx.............42, 06, 32, 40, 43, 44, 52, 63, 126
Sprucer ......................................17, 16, 08, 87, 109
Standard Components ...............32, 39, 42, 44, 126
Stargate .............. 04, 42, 32, 40, 63, 44, 30, 52, 06
                                                          124, 126
Sylvania ..........................................................19, 18
Teknika ...........................................................74, 35
Telecaption ....................................................77, 127
Teleview.................................40, 19, 38, 32, 42, 06
Texscan ..........................................................19, 18
Tocom...................................34, 33, 01, 42, 66, 120
Toshiba ................................................................. 36
Unika........................... 44, 42, 63, 29, 01, 126, 120
Universal ..............................52, 43, 44, 63, 42, 126
Viewstar ..................62, 40, 22, 13, 58, 20, 26, 107
Videoway ..........................................07, 23, 50, 129
Vidtek.................................................................... 64
Zenith ...............................................07, 23, 50, 129
Toshiba....................................................... 90
Hitachi/ Hughes....................................91, 99
Primestar.................................................... 92
Drake.......................................................... 93
Magnavox.............................................94, 95
Uniden...................................................94, 95Optimus................................................94, 95
Panasonic................................................... 96
ProScan...................................................... 97
RCA ............................................................. 97
SONY..................................................98, 105
VCR
 Operation
PV-D4732S P26-35 (2nd) [LSQT0618B].p65 2002/05/23, 18:1329 
						

							30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Index Search
Note
If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
1
2
Tape Operation
Search System
For each recording, an invisible index mark is placed on the tape. A program index and
information are also included for timer recordings. These marks are used to access or
scan recordings.
1
Program End Search
2
Fig. 1
Fig. 2
Fig. 3
Note
Locates end point of recording for continuity.
Examples of Program End Search.
If search exceeds
a few seconds in
BLANK area.
➛ ➛➛ ➛
➛search continues 7 sec. past end point,
➛ ➛➛ ➛
➛tape rewinds to 10 sec. before end point,
➛ ➛➛ ➛
➛tape plays to end point and stops. Upon locating end point,
If Program End Search is started very close to
an index mark, that mark may be skipped
over.
                         
     PROGRAM END SEARCH
SEARCH START : FF
EXIT     :SEARCH
Program 2 or BLANK Program 1 
the current tape position 
Press SEARCH button
FF
INDEX
End Point
Program  2 Program 1 the current tape position 
Press SEARCH button
INDEXINDEX BLANK BLANK
FFEnd Point
Program  2 Program 1 
the current tape position 
Press SEARCH button
BLANKINDEX
FFEnd Point
                   
            INDEX   SEARCH   ENTER   INDEX  NUMBER  :1USING   1- 9 KEYS
FORWARD  SEARCH :FF
REVERSE  SEARCH :REW
NEXT     :SEARCHEXIT     :STOP
           INDEX  SEARCH
FORWARD SEARCH  : FF
REVERSE SEARCH  : REW      
Press SEARCH*
to display SEARCH
in Stop or Play
mode, and then
press NUMBER
keys
to select recording
number.
To calculate
number, see below.
Press FF/SLOW+
or REW/SLOW- on
the remote to start
search.Press SEARCH twice
to display SEARCH in Stop or Play
mode.
Press FF/SLOW+
on the remote to
start PROGRAM
END SEARCH.To cancel, press
PLAY or STOP.
Play begins at
search end.
To search forward
or back 1 index,
press FF/SLOW+ or
REW/SLOW- on the
remote while
screen left is
displayed (10 sec.).
To cancel, press
PLAY or STOP.
 To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE: 
 indicates start points of each recording.
6157234
17534 62
PV-D4732S P26-35 (2nd) [LSQT0618B].p65 2002/05/23, 18:1330