Panasonic Dvd Vcr Deck Pv D4733 Operating Instructions

31
 Auto Play
Insert a tape ➛ Power comes on,
➛ Play starts if there is no record tab
(see p. 6).
 Auto Rewind
Play
Fast Forward
 Play Auto Eject
(Repeat Play must be off)
Play 
➛  ➛ ➛  ➛ 
➛ Tape end ➛  ➛ ➛  ➛ 
➛ Rewind
➛  ➛ ➛  ➛ 
➛ Tape ejects if set some programs.
Auto Operation Functions
Commercial Skip
VCR fast forwards (skips) over 1~3 minutes
of recorded tape.
1
Press CM/ZERO in Play mode.
    PLAY
1st  Press
2nd Press
3rd  Press1 min Skip
2 min Skip
3 min Skip
*Important:If a remote control button...

32For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tape Operation (continued)
Repeat Play
Set to playback a recording over and over.
Zero Search
To quickly return to a specified tape location.
Continue to record, playback etc.
Press STOP.
DECK will go into FF or REW mode and stop
at the last point the Counter was set to 0:00:00.
5 4 3 2 1 32 1
SELECT :              EXIT         : ACTION    SET : SET
                MENU
SET  UP  VCR
SET  CLOCK
SET  UP...

33
Weak Signal Display Feature
When “ON,” picture is displayed regardless of signal
strength.
ON: Picture is displayed regardless of signal
condition, and may not always be clearly visible.
OFF:Screen turns solid blue when signal is weak or
non-existent.
Selecting ON has no effect on connected equipment
with blue back feature.
Press ACTION twice
to return to normal screen.
4 3 2
Press 
to select “SET UP
CHANNEL,” and
press SET.
Press 
to select “WEAK SIGNAL
DISPLAY,” and
press SET
to set “ON” or...

34For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Special VCR Features (continued)
If Multi-brand feature is used (p. 28), and this feature is
set to on, a warning appears whenever an invalid key
is pressed in TV mode.
4 31
If “OFF,” remote warning will not appear
when invalid key is pressed.
Press ACTION*
to display MENU.
Press 
to select
“REMOTE WARNING,” and
press SET
to set “ON” or “OFF.”
Press ACTION twice
to return to normal screen.
Remote...

35
Copying Your Tapes  (Dubbing)
1Insert a pre-recorded tape.
2
Insert a blank tape with record tab.
Press REC, then PAUSE/STILL
immediately to enter REC/PAUSE
mode.
3
Press INPUT to set DECK Input mode to
LINE for Video Input.
(See “Selecting the Input Mode” below.)
4
Press PLAY to start dubbing.
Playing VCR starts playback.Press PAUSE/STILL to start dubbing.
DECK starts recording.
Press STOP to stop dubbing.
Caution:Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright...

36For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
AUD I O :3  ESP3  ESPDolby  Digital  3/2.1ch
Hola
SELECTSELECT:END         END         :AUDIOAUDIO
AUD I O :1  ENG1  ENGDolby  Digital  3/2.1ch
Hello
SELECTSELECT:END         END         :AUDIOAUDIO
Te amo
If after several presses of the button the language does not
change, language selection is not offered on the disc.
When disc is removed, subtitles revert to initial setting
language. If the...

37
SELECT :
When  appears on the screen while
a button is being operated, it means
that the corresponding operation is
prohibited by DECK or the disc.
The ANGLE Indicator lights up on
DECK when a scene recorded at
different angles is detected.
The angle number can be set
beforehand so that the angle is
switched whenever the ANGLE
Indicator lights up.ANGLE Indicator
1Press AUDIO in Play mode
to display the audio screen.
Vocal Selection for Karaoke Discs (DVD/Video CD)
DVDs may contain scenes shot from...

38For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Some DVDs have more than one title, e.g. movies.
If the disc offers a title menu, you can select the desired
title number. (Operation may vary according to the disc.)
1
Press TITLE*
in Play mode
to display the title screen.
Title Menu (DVD only)
DVDs may offer a special menu. This menu may include
guides to unique contents, audio/subtitle languages, etc.
Although contents and operation may vary, the...

39
You can program specific tracks and order of play.
Program Play (Video CD/CD only)Ready Checklist
DECK is in DVD mode, press DVD.
Video CD or CD is inserted.
1Press ACTION
to display DVD MAIN MENU.
2Press to select
“PLAY MODE,” and
press 
SETto display.
3
Press to select
“PROGRAM PLAY,”
and
press 
SET to display.
5
Press  
to select “START,” and
press SET to start play
of programs in the
sequence selected.
To cancel, press STOPduring play, then pressCLEAR.
4Press  
to select a track
number (Track...

40For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tracks are played in a random order.
Random Play (Video CD/CD only)
Press ACTION*
to display DVD MAIN MENU.1
Disc Operation (continued)
Press to select “PLAY MODE,”
and
press 
SETto display.
2
DVD  MA I N  MENU
SELECT :  
SET : SET
END : ACT I OND I SC  LANGUAGES
AUD I O  OUTPUT
ST I L L   MODE : AUTO
TV  MODE : 4 : 3   L e t t e r b o x
PARENTAL LOCK :LEVEL 8PLAY  MODE
Press 
to select
“RANDOM PLAY,”...