Panasonic Dvd Vcr Deck Pv D4734 Operating Instructions
Here you can view all the pages of manual Panasonic Dvd Vcr Deck Pv D4734 Operating Instructions. The Panasonic manuals for Video Recorder are available online for free. You can easily download all the documents as PDF.
Page 51
51 X 1.0 (ORIGINAL) 1st press2nd press 3rd press X 1.5 (ZOOM 1) X 2.0 (ZOOM 2) 2nd press 3rd press 1st press 4th press MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia. REW/ SLOW- FF/ SLOW+ PLAY STILL STOPSET SELECT ACTION ZOOM ANGLE SKIP+ SKIP- DVD Operation You can enlarge specific portions of a JPEG picture and select the zoom ratio using the ZOOM button on the remote during JPEG Playback screen. Set Zoom size.Press ZOOM repeatedly to change display...
Page 52
52For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo “AUDIO” selections(Factory preset: English)To select the audio soundtrack language.English/Spanish/French/Japanese Original: Original disc language OTHER 0000: Other language selection* 1 “SUBTITLE” selections(Factory preset: AUTO)To select the subtitle language.AUTO:Same language selected for “AUDIO” If language set for “AUDIO” is used in playback, subtitles will not appear. If...
Page 53
53 Make settings according to amplifier connected to optical audio output as shown in above table. *1 When connecting an amplifier (with an optical digital input connector) which does not contain the Dolby Digital or DTS decoder, be sure to select “PCM”. If “Bitstream” is selected, starting DVD play may cause such a high level of noise as to be harmful to your ears and damage the speakers. *2 When a dts decoder is connected, please select “Bitstream” in “dts.” If “PCM” is selected, there will be stereo...
Page 54
54For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Still Mode (DVD only) 1 Press to select “STILL MODE,” and press SET repeatedly for mode. (See below.) 2 AUTO :“FIELD” (Field still) or “FRAME” (Frame still) is automatically selected during the still mode. (Factory preset) FIELD:“FIELD” (Field still) is always selected. This setting will reduce jitter when compared with “AU T O” on some discs. FRAME:“FRAME” (Frame still) is always...
Page 55
55 *Important:If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. PROGRESSIVE OUT (DVD only) SET ACTION SELECT PROGRESSIVE OUT 1 Press to select “PROGRESSIVE OUT,” and press SET repeatedly for mode. (See below.) 2 OFF:Progressive scan signal is not output. ON:Progressive scan signal is output from the Component Video Output Connector. Sets the Component Video Output Connector (p. 10, 13) to output the Progressive scan signal. 3Press ACTION...
Page 56
56For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Language Code List Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or “MENUS” (see p. 52). CodeLanguage 7079Faroese 7082French 7089Frisian 7165Irish 7168Scots Gaelic 7176Galician 7178Guarani 7185Gujarati 7265Hausa 7273Hindi 7282Croatian 7285Hungarian 7289Armenian 7365Interlingua 7378Indonesian 7383Icelandic 7384Italian 7387Hebrew 7465Japanese...
Page 57
57 These displays will alert you to a missed operation or provide further instructions. Warning and Instruction Displays PLEASE SET CLOCK BY PRESSING ACTION KEY CHECK CASSETTE RECORD TAB NO CASSETTE VIDEO HEADS MAY NEED CLEANING PLEASE INSERTHEAD CLEANING CASSETTE OR REFER TO MANUAL END : PLAY VCR LOCK ACTIVATED PageCaution OSD If you attempt to set or review a Timer Recording and the Clock is not set... REMOTE CONTROL IS SET TO TV MODE USE VCR : VCR KEY USE DVD : DVD KEY PLEASE PREPARE FOR TIMER...
Page 58
58For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Before Requesting Service Power No power… Power turns itself off... Recording & Playback TV program cannot be recorded... Timer recording cannot be performed… There is no playback picture, or the playback picture is noisy or contains streaks... During special effects playback picture may contain some vertical jitter when using a TV with an Automatic Vertical Hold Control... DECK cannot...
Page 59
59 If you cannot resolve the problem, please call the Customer Call Center for product assistance at 1-800-211-PANA (7262). To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262). or, contact us via the web at:http://www.panasonic.com/contactinfo Miscellaneous Programs cannot be viewed on TV... Video cassette cannot be inserted... Video cassette ejects when a recording is started or the power is turned off for timer recording... In Stop mode, the motor (CYLINDER) continues to...
Page 60
60For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., AVE. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 Panasonic DVD/VCR Deck Limited Warranty Limited Warranty CoverageIf...