Home > Panasonic > Video Recorder > Panasonic Dvd Vcr Deck Pv D4743 Operating Instructions

Panasonic Dvd Vcr Deck Pv D4743 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Dvd Vcr Deck Pv D4743 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							31
     Auto Play
    Insert a tape ➛ Power comes on,
    ➛ Play starts if there is no record tab
    (see p. 6).
     Auto Rewind
    Play
    Fast Forward
     Play Auto Eject
    (Repeat Play must be off)
    Play 
    ➛  ➛ ➛  ➛ 
    ➛ Tape end ➛  ➛ ➛  ➛ 
    ➛ Rewind
    ➛  ➛ ➛  ➛ 
    ➛ Tape ejects if set some programs.
    Auto Operation Functions
    Commercial Skip
    VCR fast forwards (skips) over 1~3 minutes
    of recorded tape.
    1
    Press CM/ZERO in Play mode.
        PLAY
    1st  Press
    2nd Press
    3rd  Press1 min Skip
    2 min Skip
    3 min Skip
    *Important:If a remote control button does not work when pressed,
    press the VCR button on the remote and try the button again.
    No indication appears on-screen. The skip time can be changed by
    pressing CM/ZERO repeatedly as
    shown by the figure below.
    REW/SLOW-
    FF/SLOW+ PLAY
    SEARCH CM/ZEROSTOP
    VCR
     Operation
    ➛ Tape end ➛ Rewind
    NUMBER
    keys
    D4743-4743S P26-35 (030226 B-lot).p65 2003/02/26, 19:5331 
    						
    							32For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
    Tape Operation (continued)
    Repeat Play
    Set to playback a recording over and over.
    Zero Search
    To quickly return to a specified tape location.
    Continue to record, playback etc.
    Press STOP.
    DECK will go into FF or REW mode and stop
    at the last point the Counter was set to 0:00:00.
    5 4 3 2 1 32 1
    SELECT :              EXIT         : ACTION    SET : SET
                    MENU
    SET  UP  VCR
    SET  CLOCK
    SET  UP  CHANNEL
    IDIOMA/LANGUE : ENGLISH
    VCR’S  OUTPUT  CH:3
    PLAY       1 2 : 0 0AM 0 : 0 0 : 0 0 SP
    Press ACTION*
    to display MENU.
    Press 
    to select “SET UP VCR,” and
    press SET.
    Play repeats at tape end or if unrecorded portion
    over 30 sec. is detected.
    Press ACTION twice
    to return to normal screen.
    Press DISPLAY during play
    to display Counter.
    Press COUNTER RESET
    at desired position to reset
    to “0:00:00”.
    Press CM/ZERO in 
    Stop mode
    to start Zero Search.
    4
    Press 
    to select “REPEAT PLAY,”
    and press SET
    to set “ON” or “OFF.”REPEAT  PLAY                   : OFFREMOTE  WARN I NG            : ONAUTO  SHUT-OFF               : OFFAUTO  VCR/TV : OFF
    SELE
    CT :                 SET: SETEND       : ACT I ON     
       SET  UP  VCR  
    Note
    For repeat play in DVD mode, see page 42.
    REW        1 2 : 3 0AM          CH  02 0 : 30 : 30 SP
    STOP       1 2 : 3 1AM          CH  02 0 : 0 0 : 0 0 SP
    VCR/TV Selector Feature
    The VCR/TV selection can be set to
    auto or manual.
    3 1REPEAT  PLAY                   : OFFREMOTE  WARN I NG            : ONAUTO  SHUT-OFF               : OFFAUTO  VCR/TV : OFF
    SELE
    CT :                 SET: SETEND       : ACT I ON     
       SET  UP  VCR  
    Press ACTION
    to display MENU.
    Press 
    to select
    “
    AUTO VCR/
    TV,” and
    press SET
    to set “ON”
    or “OFF.”
    Press ACTION
    to return to normal screen.
    4
    Note
    OFF(Manual):You select “VCR” or
    “TV” mode using the
    VCR/TV button on the
    remote.
    ON(Auto):“VCR” mode is
    automatically set when
    VCR is turned on, or in
    Play mode.
    For more on VCR/TV selection, see
    “Record one station, watch another”
    and “Select channels at DECK”
    sections (see p. 21).
    2Press 
    to select
    “SET UP
    VCR,” and
    press SET.
    SELECT :              EXIT         : ACTION    SET : SET
                    MENU
    SET  UP  VCR
    SET  CLOCK
    SET  UP  CHANNEL
    IDIOMA/LANGUE : ENGLISH
    VCR’S  OUTPUT  CH:3
    D4743-4743S P26-35 (030226 B-lot).p65 2003/02/26, 19:5332 
    						
    							33
    Weak Signal Display Feature
    When “ON,” picture is displayed regardless of signal
    strength.
    ON: Picture is displayed regardless of signal
    condition, and may not always be clearly visible.
    OFF:Screen turns solid blue when signal is weak or
    non-existent.
    Selecting ON has no effect on connected equipment
    with blue back feature.
    Press ACTION twice
    to return to normal screen.
    4 3 2
    Press 
    to select “SET UP
    CHANNEL,” and
    press SET.
    Press 
    to select “WEAK SIGNAL
    DISPLAY,” and
    press SET
    to set “ON” or “OFF.”
    SELECT :              EXIT         : ACTION    SET : SET
                    MENU
    SET  UP  VCR
    SET  CLOCK
    SET UP CHANNEL
    IDIOMA/LANGUE : ENGLISH
    VCR’S  OUTPUT  CH:3
    1Press ACTION
    to display MENU.
    SELECT :                 SET: SETEXIT       : ACT I ON    
    ANTENNA  :   CABLE
    AUTO   SETWEAK  S I GNAL  D I SPLAY:OFF
    SET  UP  CHANNEL
    Special VCR  Features*Important:If a remote control button does not work
    when pressed,  press the VCR button
    on the remote and try the button again.
    When set to ON, all operations
    except for timer record and tape
    eject are prohibited. Useful for
    households with small children.
    VCR Lock Feature
    VCR  LOCK  ACT I VATED
    VCR  LOCK  OFF
    VCR Lock cancels in 24 hours if
    clock is set.
    To turn off, repeat above. To turn on, hold down REC on
    DECK in Stop mode with no
    tape inserted for 7 seconds.
    (Please ignore “NO CASSETTE”
    warning.)
    REC
    Auto Shut-Off Feature
    The power shuts off at a preset time.
    3 1
    4
    Press 
    to select “AUTO SHUT-OFF.”
    Press SET repeatedly to
    change shutoff time as
    shown below.
    Press ACTION twice
    to return to normal screen. Press ACTION
    to display MENU.
    2
    SELECT :              EXIT         : ACTION    SET : SET
                    MENU
    SET  UP  VCR
    SET  CLOCK
    SET  UP  CHANNEL
    IDIOMA/LANGUE : ENGLISH
    VCR’S  OUTPUT  CH:3Press to select “SET UP VCR,” and
    press SET.
    REPEAT  PLAY                : OFFREMOTE  WARN I NG         : ONAUTO  SHUT-OFF            : OFFAUTO  VCR/TV                   : OFF
    SELE
    CT :                   SET: SETEXIT       : ACT I ON   
    SET  UP  VCR
    OFF
    2 Hours
    6 Hours4 Hours
    The shut-off countdown will not function during Play or
    Record.
    Note
    VCR
     Operation
    ACTION
    SET
    SELECT 
    COUNTER
    RESET
    DISPLAYCM/ZERO STOP
    D4743-4743S P26-35 (030226 B-lot).p65 2003/02/26, 19:5333 
    						
    							34For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
    Special VCR Features (continued)
    If Multi-brand feature is used (p. 28), and this feature is
    set to on, a warning appears whenever an invalid key
    is pressed in TV mode.
    4 31
    If “OFF,” remote warning will not appear
    when invalid key is pressed.
    Press ACTION*
    to display MENU.
    Press 
    to select
    “REMOTE WARNING,” and
    press SET
    to set “ON” or “OFF.”
    Press ACTION twice
    to return to normal screen.
    Remote Warning Feature
    2
    Press 
    to select “SET UP VCR,”
    and
    press SET.
    SELECT :              EXIT         : ACTION    SET : SET
                    MENU
    SET  UP  VCR
    SET  CLOCK
    SET  UP  CHANNEL
    IDIOMA/LANGUE : ENGLISH
    VCR’S  OUTPUT  CH:3
    REPEAT  PLAY                   :  OFFREMOTE  WARN I NG            :  ONAUTO  SHUT-OFF               :  OFFAUTO  VCR/TV                      : OFF
    SELE
    CT :                 SET: SETEXIT       : ACT I ON    
    SET  UP  VCR
    *Important:If a remote control button does not work
    when pressed,  press the VCR button
    on the remote and try the button again.
    To find out the present tape position and amount of tape remaining.
    Tape position is displayed for VHS-C type Cassettes, tapes
    under 30 minute long, and some other tapes, but the
    position is not correct.
    Tape remaining time display may not be
    precise.
    1
    BEG I N                END
                                                    SP
                                     R 120 M
     I  N.
    “DETECTING TAPE POSITION” is displayed
    only when a cassette is first inserted, and it
    takes several seconds for correct tape
    position to appear.
    Tape Position and Tape Status Feature
    Press TAPE POS.
    to return to normal screen.
    2
    The present tape position indication and
    amount of tape remaining (according to
    tape speed) is displayed.
    DETECTING   TAPE   POSITION
    Press TAPE POS.
    to detect current tape position.
    This function cannot display exact amount of tape remaining for
    tapes 30 minutes or less, or for tapes over 120 minutes in length.
    NoteREC
    ACTION
    SET
    SELECT 
    STOP
    INPUT
    PAUSE/
    STILL
    Tape Position
    D4743-4743S P26-35 (030226 B-lot).p65 2003/02/26, 19:5334 
    						
    							35
    Copying Your Tapes  (Dubbing)
    1Insert a pre-recorded tape.
    2
    Insert a blank tape with record tab.
    Press REC, then PAUSE/STILL
    immediately to enter REC/PAUSE
    mode.
    3
    Press INPUT to set DECK Input mode to
    LINE for Video Input.
    (See “Selecting the Input Mode” below.)
    4
    Press PLAY to start dubbing.
    Playing VCR starts playback.Press PAUSE/STILL to start dubbing.
    DECK starts recording.
    Press STOP to stop dubbing.
    Caution:Unauthorized exchanging and/or copying of copyrighted recordings may be
    copyright infringement.
    Please note that some tapes cannot be dubbed on DECK. Also, it is not
    possible to dub DVD/ Video CD/ CD to VHS tapes using DECK.
    Playing (Source) VCRRecording (Editing) DECK
    5
    To Monitor Dubbing on  TV
    1Turn TV on and tune to the Recording
    VCR channel (CH 3 or CH 4).
    2If Auto VCR/TV (see p.32) is set to
    “OFF,” press VCR/TV on the remote to
    be VCR mode.
    NoteDubbing tapes protected with Copy
    Guard will result in poor quality
    recordings.
    Connection
    Press STOP to stop dubbing. Press PLAY, then PAUSE/STILL
    immediately to enter PLAY/PAUSE
    mode.
    The operation of steps 4 and 5 must be done on the
    playing and recording VCRs at the same time.
    Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.
    To monitor the dubbing, also connect TV as shown.
    Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R”
    AUDIO IN terminals on DECK.
    In place of Playing VCR, you can use other equipment, such as a Camcorder.
    Simply connect the unit’s Audio/Video outputs to DECK.
     Selecting the Input Mode
    Method 1:Press INPUT repeatedly.Channel Number 
    ↔ ↔↔ ↔
    ↔ LINE1 
    ↔ ↔↔ ↔
    ↔ LINE2Method 2:Press CH /.
    Display will change as below.
    Front of DECK
     VIDEO IN 2L-AUDIO IN2-R
    (Audio/Video In Terminals
    on the front of DECK are
    available)
    IN FROM ANT.
    OUT
     TO TV
    IN 1
    VHF/UHF
    OUT
    TV
    OUT
    VHF/
    UHF
    DVD/VCR DECK
     VIDEO
     AUDIO
    1L
    R
    VCR/ Camcorder (Hi-Fi)
     VIDEO
     AUDIOL
    R
    “L1” or “L2” lights up on Multi Function Display
    (about 4 seconds) when LINE1 or LINE2 is selected.
    LINE1:  For rear audio/video connection.
    LINE2:  For front audio/video connection.
    1
    2
    VCR
     Operation
    1
    23
    125
    LINE1(CABLE)69(TV)orLINE2Press
    Press
    D4743-4743S P26-35 (030226 B-lot).p65 2003/02/26, 19:5335 
    						
    							36For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
    AUDIO:3  ESP
    Dolby  Digital  3/2.1ch
    Hola
    SELECT:END         :AUDIO
    AUDIO:1  ENG
    Dolby  Digital  3/2.1ch
    Hello
    SELECT:END         :AUDIO
    Te amo
    If after several presses of the button the language does not
    change, language selection is not offered on the disc.
    When disc is removed, subtitles revert to initial setting
    language. If the initial language is not recorded on the disc,
    the disc’s priority language will appear. You can select a different subtitle language (if offered) than
    the one set at the Settings for DVD Operation.
    (See p. 47.)
    Press 
    to select a language.
    Press  
    to select “ON” or “OFF.”
    Subtitle Language (DVD only)
    Display disappears after
    5 seconds.
    When no subtitles are offered,
    “-” will be displayed instead of
    the language number.
    Press SUB TITLE*
    in Play mode to display
    the subtitle selection
    on-screen.
    ENG
    FRA
    DEU
    ITA
    ESP
    NLDEnglish
    French
    German
    Italian
    Spanish
    Dutch
    SVE
    NOR
    DAN
    POR
    RUS
    JPNSwedish
    Norwegian
    Danish
    Portuguese
    Russian
    Japanese
    CHI
    KOR
    MAL
    VIE
    THA
     ∗
    Chinese
    Korean
    Malay
    Vietnamese
    Thai
    Other
    [Subtitle language]
    [Audio sound track language]
    Change the No. by pressing ,
    and press SET.
    Ready Checklist
    Please read “Basic DVD Operation”
    on p. 22.
    You can change the audio soundtrack language, selected
    at the Settings for DVD Operation, to a different language
    if available. (See p. 47.)
    (This operation works only with discs on which multiple
    audio soundtrack languages are recorded.)
    Press AUDIOin Play mode to display the
    audio selection on-screen.
    Audio Soundtrack Language (DVD only)
    [Audio attribute 1 type, sampling
    frequency, bit No. of the disc (see
    p. 48.)]
    Disc Operation
    1
    2
    1
    2
    Subtitle language being played back (see chart, right).
    Press 
    to select desired language.
    Audio soundtrack language being played back (see chart,
    above right).If, after several presses of the
    AUDIO button the language does not
    change, language selection is not
    offered on the disc.
    When disc is removed, language
    reverts to initial setting. If this
    language is not recorded on the disc,
    the language recorded will be heard.
    Notes
    Notes
    Display disappears after
    5 seconds.
    Audio attribute 1 type, sampling
    frequency, bit No. of the disc or
    number of speaker channel.
    LPCM
    Dolby DigitalDTS96 kHz
    or
    48 kHz
    1ch - 5.1ch
    1ch - 5.1ch16bit
    20bit
    24bitLinear PCM disc
    Dolby Digital disc
    DTS disc
    D4743-4743S P36-60 (030226 B-lot).p65 2003/02/26, 19:5336 
    						
    							37
    SELECT :
    When  appears on the screen while
    a button is being operated, it means
    that the corresponding operation is
    prohibited by DECK or the disc.
    The ANGLE Indicator lights up on
    DECK when a scene recorded at
    different angles is detected.
    The angle number can be set
    beforehand so that the angle is
    switched whenever the ANGLE
    Indicator lights up.ANGLE Indicator
     DVD Karaoke (1 vocal)   VOCAL ON     VOCAL OFF
     DVD Karaoke (2 vocals) VOCAL V1    VOCAL V2    VOCAL V1+V2    VOCAL OFF 
     Video CD                        LR     L     R
    1Press AUDIO in Play mode
    to display the audio screen.
    Vocal Selection for Karaoke Discs (DVD/Video CD)
    DVDs may contain scenes shot from multiple camera
    angles allowing the same scene to be viewed at different
    angles. You can view these angles, if available, using the
    ANGLE button.
    1
    Press ANGLE
    in Play mode to display the
    angle selection on-screen.
    Display disappears after
    5 seconds.
    Multiple Angle Viewing (DVD only)
    2Press 
    to select the desired
    angle.
    2
    Press  (or  )
    to select as shown below,
    and
    press 
     (or ) to set.
    (DVD only)
    Number of angle being played back.
    SELECT :
    SELECT :
    END         : AUDIO
    You can enlarge specific portions of a picture and
    select the zoom ratio using the ZOOM button during
    DVD playback.
    Press ZOOM repeatedly to change display
    as follows.
    Picture Zoom (DVD only)
    You can enlarge the center portion of the image
    to one of 2 magnifications.
    The subtitle cannot be enlarged nor
    can it’s position be changed.
    The picture zoom feature does not
    work with a Video CD.
    During picture zoom, “ZOOM1” or
    “ZOOM2” appears on-screen for 5
    second.
    Zooming, on some discs, may result
    in poor picture quality, or may not
    operate at all.
    Use the , ,  and   buttons to move the position
    up, down, left and right.
    Notes
    Notes*Important: if a remote control button does not work when pressed,
    press the DVD button on the remote and try the button again.
    DV D
     Operation
    AUDIO ANGLE SUB TITLE ZOOM
    SELECT 
    SET
    D4743-4743S P36-60 (030226 B-lot).p65 2003/02/26, 19:5337 
    						
    							38For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
    Some DVDs have more than one title, e.g. movies.
    If the disc offers a title menu, you can select the desired
    title number. (Operation may vary according to the disc.)
    1
    Press TITLE*
    in Play mode
    to display the title screen.
    Title Menu (DVD only)
    DVDs may offer a special menu. This menu may include
    guides to unique contents, audio/subtitle languages, etc.
    Although contents and operation may vary, the following
    steps show basic steps for using the menu.
    1
    2Press MENUin Play mode to display
    DVD MENU.
    Press 
      or
    NUMBER keysto select an item, and
    press 
    SET or PLAY
    to perform.
    DVD Menu (DVD only)
    2Press   orNUMBER keys
    to select a title, and
    press 
    SET or PLAYto start playing.
    Disc Operation (continued)
    “Pressing SET or PLAY” is
    not necessary when using
    NUMBER keys.
     
    T I TLE  MENU
    Cas t l es
    Love
     r s
    Dogs
    B
     i r ds
    T I TLE  MENU
    Cas t l es
    Love
     r s
    Dogs
    B
     i r ds
    DVD MENU
    3 . ANGLE
    1 . SUBT I TLE
    2 . AUD
     I O
    DVD MENU
    3 . ANGLE
    1 . SUBT I TLE
    2 . AUD
     I O
    B i rds
    of  the  world
    
    Repeat step 2 if there is
    more than one menu. “Pressing SET or PLAY” is
    not necessary when using
    NUMBER keys.
    STOP
    PLAY
    SET SELECT
     
    NUMBER
    keys
    TITLE
    MENU
    CLEAR
    ACTION
    D4743-4743S P36-60 (030226 B-lot).p65 2003/02/26, 19:5338 
    						
    							39
    You can program specific tracks and order of play.
    Program Play (Video CD/CD only)Ready Checklist
    DECK is in DVD mode, press DVD.
    Video CD or CD is inserted.
    1Press ACTION
    to display DVD MAIN MENU.
    2Press to select
    “PLAY MODE,” and
    press 
    SETto display.
    3
    Press to select
    “PROGRAM PLAY,”
    and
    press 
    SET to display.
    5
    Press  
    to select “START,” and
    press SET to start play
    of programs in the
    sequence selected.
    To cancel, press STOPduring play, then pressCLEAR.
    4Press  
    to select a track
    number (Track
    numbers on disc are
    displayed.), and
    press 
    SET.
    Repeat step 4 to select another track.
    The selected track is added on the right side.
    DVD  MA I N  MENU
    SELECT :  
    SET : SET
    END : ACT I OND I SC  LANGUAGES
    AUD I O  OUTPUT
    ST I L L   MODE : AUTO
    TV  MODE : 4:3 Letterbox
    PARENTAL LOCK :LEVEL 8PLAY  MODE
    PLAY  MODE
    SELECT :  
    SET : SET
    END : ACT I ONPROGRAM  PLAYRANDOM  PLAY
    SELECT :  
    SET : SET
    END : ACT I ON
    D I SC PROGRAM
    161116 5 8
    2 7 12 17 15 6
    3 8 13 18 1 13
    4 91419 3 2
    5101520 2
         
    CLEAR  LAST
    CLEAR  ALLSTART PROGRAM  PLAY
    PROGRAM  PLAY
    SELECT :  
    SET : SET
    END : ACT I OND I SC PROGRAM
    161116 5 8
    2 7 12 17 15 6
    3 8 13 18 1 13
    4     9  14 19 3 2
    5101520 2
          
    CLEAR  LAST
    CLEAR  ALL START
    Notes
    Program Repeat Play
    (Video CD/CD only)
    4Press SET to enter Select mode.
    Cursor move to “OFF.”
    5Press  to select “DISC.”(DECK Information Screen) (DECK Information Screen)
    1Do operation steps 1 through 5
    at left on this page.
    2Press DISPLAY to display Disc
    Information screen.
    (Disc Information Screen)
    3Press DISPLAY to display
    DECK Information screen.
    6Press SET to set mode.
    Cursor move to “REPEAT.”
    To cancel, select “REPEAT :
    OFF” in step 5, then press 
    SET. *Important: if a remote control button does not work when pressed,
    press the DVD button on the remote and try the button again.
    Up to 15 tracks can be programmed.
    “
     ” or “ ” (depending on disc) indicates additional
    PROGRAM PLAY screen.
    Press 
      for next or previous screen.
    To clear the last program one by one
    Press 
      to move to “CLEAR LAST” and
    press SET. (Pressing CLEAR on remote control
    also clears last program.)
    To clear all programs
    Press 
      to move to “CLEAR ALL” and pressSET. (Programs are also cleared when the power
    is turned off or the disc is removed.)
    DV D
     Operation
    SELECT : 
    SET : SET END : D I SPLAY
    PLAY
    REPEAT : DISC
    PROGRAM PLAY 
    SET : SET END  : D I SPLAY
    SET : SET NEXT : D I SPLAY
    TRACK:    1 V I DEO  CD
    PBC : OFF 01 : 35 : 12
    D4743-4743S P36-60 (030226 B-lot).p65 2003/02/26, 19:5339 
    						
    							40For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
    Tracks are played in a random order.
    Random Play (Video CD/CD only)
    Press ACTION*
    to display DVD MAIN MENU.1
    Disc Operation (continued)
    Press to select “PLAY MODE,”
    and
    press 
    SETto display.
    2
    Press 
    to select
    “RANDOM PLAY,” and
    press 
    SET
    to begin random play.
    To cancel, press STOPduring play, then pressCLEAR.
    3
    *Important:
    If a remote control button does not
    work when pressed, press the
    DVD button on the remote and try
    the button again.
    Ready Checklist
    DECK is in DVD mode, press DVD.
    “ON” is set ..... When  a  DVD  is  played  back,  the  average  volume  is  increased.
    “OFF” is set .... The volume level recorded on the disc is played back just as it is.
    When audio equipment is connected, setting the Sound Output level to “OFF” is recommended.
    If the sound becomes abnormal while playing a disc, set the Sound Output level to “OFF.”
    Notes
    SET SELECT
     
    CLEAR
    ACTION
    STOP
    VOLUME
    ADJUST
    Setting the VOLUME ADJUST
    Press VOL.ADJ repeatedly to change “ON” 
    ↔ ↔↔ ↔
    ↔ “OFF.”
    “ON” or “OFF” lights up on Multi Function Display (about 3 seconds) when
    press VOL.ADJ.
    Some DVD
    [Volume level is low]VOLUME ADJUST “OFF”
    Volume is the original level.
    VOLUME ADJUST “ON”
    Volume level is increased
    when played back.
    Some DVD are recorded in lower average volume level.
    For these DVD, this DECK can be set so that the
    average volume is increased.
    DVD  MA I N  MENU
    SELECT :  
    SET : SET
    END : ACT I OND I SC  LANGUAGES
    AUD I O  OUTPUT
    ST I L L   MODE : AUTO
    TV  MODE : 4:3 Letterbox
    PARENTAL LOCK :LEVEL 8PLAY  MODE
    PLAY  MODE
    SELECT :  
    SET : SET
    END : ACT I ONPROGRAM  PLAY
    RANDOM  PLAY
    D4743-4743S P36-60 (030226 B-lot).p65 2003/02/26, 19:5340 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Dvd Vcr Deck Pv D4743 Operating Instructions