Panasonic Electronic Board Ub 5838 Operating Instructions

Scanning21
Using
6
Press the Start/Stop Key.
•The unit starts scanning and the image is 
printed.
• The copying status is shown on the display.
• After printing is finished, the Screen Erase 
Announce will be shown on the display.
7
After erasing the written text/diagrams on the 
screen, press the Mode Key ( ) to return to 
standby mode.
Note
•Only remove the USB cable once you have 
returned to standby mode.
• For information regarding how to set ink 
cartridges or paper in your printer, please 
refer...

Scanning
22
Note
• The use of a USB hub is not recommended. 
We cannot guarantee that the unit will work 
properly.
• Do not connect two or more Panasonic 
electronic boards to a computer. It may cause 
the computer operation to become unstable.
3
Press the Mode Key   to select the 
scanning mode.
4
Press the Start/Stop Key.
•The unit starts scanning.
• The scanning status is shown on the display.
• When scanning has finished, a preview of the 
scanned image is shown on the display.
Note
• Do not remove...

23
Using
Moving the Electronic Board
1
Make sure that the power switch is set to off 
( ), and disconnect the power cord on both 
ends.
•Make sure if there are any other devices 
connected to the unit. If so, disconnect them.
2
Release the lock  A and fold back the fall-
prevention extension legs  B as follows:
3
Release the caster locks and move the unit.
Note
•Always move the unit with 2 people.
4
Lock the casters and set the fall-prevention 
extension legs.
5
Plug-in the power cord on both ends.
A
AB...

24
Setting the Unit
The following settings can be made using the control 
panel.
Note
•The item “Setting the number of copies” is displayed 
at the top of the set-up menu only when the printer is 
connected.
It is possible to set the number of copies (1 to 9) when 
making multiple copies with a printer.
1
Press the Set-up Key  .
• The set-up screen is displayed and the 
multiple copy setting for printers is selected.
2
Press the Advance Key ( ) repeatedly to 
select the desired number of copies.
3
Press...

Setting the Unit25
Using
3
Press the Advance Key ( ) repeatedly to 
select   (On) or   (Off).
•When the scanning time display is set to “off”, 
the following screen is displayed.
4
Press the Mode Key ( ) to return to standby 
mode. It is possible to select the file format for outputting 
images to a USB flash memory device, SD memory 
card or computer.
1
Press the Set-up Key  .
•
The set-up screen is displayed.
2
Press the Set-up Key ( ) repeatedly to select 
the following item.
3
Press the Advance Key (...

Setting the Unit
26
When images are scanned in full size mode, they are 
stretched and enlarged in order to utilize the entire 
space of a page.
1
Press the Set-up Key  .
• The set-up screen is displayed.
2
Press the Set-up Key ( ) repeatedly to select 
the following item.
3
Press the Advance Key ( ) repeatedly to 
select   (Regular) or   (Full size).
4
Press the Mode Key ( ) to return to standby 
mode. It is possible to set the current time for the unit clock.
1
Press the Set-up Key  .
•
The set-up...

Setting the Unit27
Using
To prevent third parties from operating the unit, it is 
possible to set the unit to require a password to be 
entered when the power is turned on or after a certain 
period of time has passed.
1
Press the Set-up Key  .
•The set-up screen is displayed.
2
Press the Set-up Key ( ) repeatedly to select 
the following item.
3
Press the Advance Key ( ).
4
If the password has already been set, enter the 
4-digit password.
5
Press the Advance Key ( ) repeatedly to 
select   (Password...

Setting the Unit
28
By performing the Test Print feature, it is possible to 
clean the printer head from this unit when scanned 
images are not printed correctly (ex. certain areas 
appear blank).
Once the printer head is cleaned, the following pattern 
will be printed.
If the pattern is printed as shown below, the problem 
has been fixed. If the pattern is not printed as shown 
below, refer to the manual of the printer for details. •This pattern is printed in color.
1
Press the Set-up Key  .
•The set-up...

29
Help
Daily Care and Maintenance
Always turn off the power switch and unplug the 
power plug when cleaning the unit.
Gently wipe the screen film and unit with a water-
dampened cloth that has been thoroughly wrung.
Note
•Use a neutral kitchen cleaner diluted with water for 
hard-to-clean stains. (If you accidentally write on the 
screen with an oil-based marker, wipe with a small 
amount of ethyl alcohol.)
• Do not use thinner, benzine or cleaners containing 
abrasives or surfactants, as this may...

Daily Care and Maintenance
30
When the clock battery has been drained, the time set-
up screen is displayed each time the unit’s power is 
turned on.
Replace the battery as follows and set the current time 
(see page 26).
1
Loosen the screw attached to the lower side of 
the Control Panel  1, then remove the battery 
holder  2.
Note
• Do not loosen any other screws.
2
Remove the old battery and install the new one 
with the positive (“+”) terminal upward.
•Always use “CR2032” batteries and be sure 
that...