Panasonic Es Sa40 Operating Instructions

Operating Instructions
Manuel d’utilisation
Rechargeable Shaver
Rasoir rechargeable
Model No.
N° de modèle ES‑SA40
Before operating this unit, please read these instructions completely.Il est recommandé de lire attentivement ce manuel avant d’utiliser l’appareil.
English	2
Français	11
Español	20 


English
IMPORTANT	SAFETY	
INSTRUCTIONS
When using an electrical appliance, basic precautions 
should always be followed, including the following:
Read all instructions before using this appliance.
DANGER	To	reduce	 the	risk	 of	electric	 shock:
1. Do not reach for an appliance that has fallen into 
water. Unplug immediately.
.  Charger unit is not for immersion or for use in shower.
3.  Do not place or store appliance where it can fall or be 
pulled into a tub or sink. Do not place in or drop...

3
English

5. Do not use outdoors or operate where aerosol (spray) 
products are being used or where oxygen is being 
administered.
6.  Do not use this appliance with damaged shaving blade 
and/or foil, as facial injury may occur.
7.  Always attach plug to appliance first, then to outlet. To 
disconnect, turn all controls to “off ” then remove plug 
from outlet.
8.  Plug charger directory into receptacle ‑ do not use an 
extention cord.
9.  Unplug charger before plugging or unplugging 
appliance.
SAVE...

4
English
Important
Before	useThis WET/DRY shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean it in water. The following is the symbol of Wet shaver. The symbol 
means that the hand‑held part may be used in a bath or shower.
Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic WET/DRY shaver requires a little time to get used to because your skin and beard need about a...

5
English

concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Keep these operating instructions in a safe place.
Parts	identification










A Protective capB  Outer foil section1  Outer foil2  Foil frameC  Inner bladeD  Main body3  Foil frame release buttons4  Switch lock button
5  OFF/ON switch6  Appliance socket7  Trimmer8  Trimmer handleE  Charging adaptor (RE7‑53)9  Charging...

6
English
ChargingCharge
Perform the following steps to charge the shaver if it seems to lose the speed.You can fully charge the shaver in 8 hours.A full charge will supply enough power for approx. 7 shaves of 3 minutes each.
11Turn	off	the	shaver	and	insert	it	in	the	charging	adaptor	as	illustrated.
22Plug	in	the	adaptor	into	a	household	
outlet.
The charge indicator lamp glows and stays on until the shaver is removed from the charging adaptor.
•
• 

7
English

Using	the	shaverShave
90
11Depress	the	switch	lock	
button	and	slide	the	OFF/
ON	switch	upwards.22Hold	the	shaver	as	
illustrated	above	and	
shave.
Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand and move the shaver back and forth in the direction of your beard. You may gently increase the amount of pressure as your skin becomes accustomed to this shaver. Applying excessive pressure does not provide a closer shave.
•Using	the	trimmer
Slide the...

8
English
CleaningClean
1. Remove the shaver from the charging adaptor.
.  Apply some hand soap and some water 
to the outer foil.
3.  Turn the shaver on.
4.  Turn the shaver off after 10‑0 seconds.
5.  Remove the outer foil section and turn 
the shaver on.
6.  Clean the shaver and the outer foil 
section with running water.
7.  Wipe off any drops of water with a dry 
cloth.
8.  Dry the outer foil section and the shaver 
completely.
9.  Attach the outer foil section to the 
shaver. 

9
English

Replacing	the	outer	foil	and	the	inner	blade
outer foilonce every year
inner bladeonce every two years
Replacing	the	outer	foil1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated.
.  Gently push the outer foil in the way as illustrated. Then it will pop up from the foil frame. 
3.  The new outer foil should be slightly 
bent and pushed in until it is hooked in the foil frame.
Replacing	the	inner	blade1.  Press the foil frame release buttons and...

10
EnglishRemoving	the	built-in	rechargeable	battery
ATTENTION:A nickel metal hydride battery that is recyclable powers the product you 
have purchased. Please call 1‑800‑8‑BATTERY for information on how to 
recycle this battery.
R B R C
N i - M HT M
Remove the built‑in rechargeable battery before disposing of the shaver. Do not dismantle or replace the battery so that you can use the shaver again. This could cause fire or an electric shock. Replace it at an authorized service center.Remove the shaver...