Panasonic Expandable Digital Cordless Handset Kx-tga570, Kx-tga571 Installation Manual

							Thank you for purchasing a Panasonic cordless telephone.
Please read this Installation Manual before using the unit and save for 
future reference.
For assistance, visit our website:
http://www.panasonic.com/phonehelp for customers in the U.S.A. or 
Puerto Rico.This handset is an accessory handset for use with Panasonic base units 
KX-TG5761/KX-TG5766/KX-TG5767/KX-TG5771/KX-TG5776/
KX-TG5777. You must register this handset with your base unit before it 
can be used.
This installation manual describes only the steps needed to register and 
begin using the handset. Please read the base unit’s operating 
instructions for further details.
Charge the battery for 7 hours before initial use.
5.8 GHz Expandable Digital Cordless Handset
Model No. 
KX-TGA570
Model No. KX-TGA571
Installation Manual
Model shown is KX-TGA570.
PQQX15022ZA  DM0206SN1046
TGA570_571(e).fm  Page 1  Thursday, April 13, 2006  1:51 PM 
						

							2For assistance, please visit http://www.panasonic.com/consumersupport
Accessory information
Included accessories
*1 The handset cover comes attached to the handset.
*2 Both of the USB cables function well.
*3 Allows you to install the GIGARANGE USB Utility software on a compatible computer.
Additional/replacement accessories
Sales and support information
LTo order additional/replacement accessories, call 1-800-332-5368.
LTTY users (hearing or speech impaired users) can call 1-866-605-1277.
Accessory itemOrder numberQuantity
KX-TGA570KX-TGA571
Charger PQLV30043ZS 1 1
AC adaptor for charger PQLV207Z 1 1
Battery HHR-P105 1 1
Handset cover
*1PQYNTG5771SR 1 1
USB  cable PQJA10166Z or                 
*2 
PQJA10177Z–1
CD-ROM
*3PQJKTG5776Z – 1
Accessory itemOrder number
Rechargeable nickel metal 
hydride (Ni-MH) batteryHHR-P105
Headset KX-TCA60, KX-TCA86, KX-TCA88HA, KX-TCA91, 
KX-TCA92, or KX-TCA98
Belt clip PQKE10457Z1
TGA570_571(e).fm  Page 2  Thursday, April 13, 2006  1:51 PM 
						

							For assistance, please visit http://www.panasonic.com/consumersupport3
Setting up the handset
Connecting the charger
LUse only the included Panasonic AC 
adaptor PQLV207.
Note:
LThe AC adaptor must remain connected 
at all times. (It is normal for the adaptor 
to feel warm during use.)
LThe AC adaptor should be connected to 
a vertically oriented or floor-mounted AC 
outlet. Do not connect the AC adaptor to 
a ceiling-mounted AC outlet, as the 
weight of the adaptor may cause it to 
become disconnected.
Battery installation
1Press the notch of the handset cover 
firmly, and slide it in the direction of the 
arrow. 
2Insert the battery (A), and press it 
down until it snaps into position (B). 
Then close the handset cover (C, D).
Attention:
A nickel metal hydride battery that is 
recyclable powers the product you have 
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to 
recycle this battery.
Fasten the AC adaptor cord to prevent
it from being disconnected.
(120 V AC, 60 Hz)
Bottom of
the chargerHooks
AB
C
D
TGA570_571(e).fm  Page 3  Thursday, April 13, 2006  1:51 PM 
						

							4For assistance, please visit http://www.panasonic.com/consumersupport
Battery charge
Place the handset on the charger for 7 
hours before initial use.
While charging, the charge indicator on the 
handset lights in amber. When the battery 
is fully charged, the indicator lights in 
green.
LHandset shown is KX-TGA570.
Note:
LIf you want to use the handset 
immediately, charge the battery for at 
least 15 minutes.
LTo ensure that the battery charges 
properly, clean the charge contacts of 
the handset and charger with a soft, dry 
cloth once a month. Clean more often if 
the unit is subject to the exposure of 
grease, dust, or high humidity.
Panasonic battery performance
Note:
LThe handset can be left on the charger 
without any ill effect on the battery.
LThe battery level may not be displayed 
correctly after you replace the battery. In 
this case, place the handset on the 
charger and let charge for 7 hours.
Charge 
indicator
OperationOperating time
While in use 
(talking)Up to 5 hours
While not in use 
(standby)Up to 7 days
While using the 
clarity booster 
featureUp to 3 hours
TGA570_571(e).fm  Page 4  Thursday, April 13, 2006  1:51 PM 
						

							For assistance, please visit http://www.panasonic.com/consumersupport5
Registration
Register the handset to a KX-TG5761/KX-
TG5766/KX-TG5767/KX-TG5771/KX-
TG5776/KX-TG5777 base unit.
1Base unit:
Press and hold {INTERCOM} until the 
IN USE indicator flashes.
LAfter the IN USE indicator starts 
flashing, the rest of the procedure 
must be completed within 90 
seconds.
2Handset:
Press {OK}, then wait until a beep 
sounds.
Changing the display language
1{MENU} (middle soft key) i 
{#}{1}{1}{0}
2Select the desired setting.
3Press the middle soft key to save. i 
{OFF}
TGA570_571(e).fm  Page 5  Thursday, April 13, 2006  1:51 PM 
						

							6For assistance, please visit http://www.panasonic.com/consumersupport
Headset (optional)
Connecting a headset to the handset 
allows hands-free phone conversations. 
We recommend using the Panasonic 
headset noted on page 2.
LHeadset shown is KX-TCA86.
LHandset shown is KX-TGA570.
Wall mounting
1Drive the screws (not included) into the 
wall using the wall mount template as a 
guide.
2Mount the charger (A), then slide it 
down (B) and to the right (C) until it is 
secure.
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
Wall mount template for the charger
25.4 mm 
(1 inch)
TGA570_571(e).fm  Page 6  Thursday, April 13, 2006  1:51 PM 
						

							For assistance, please visit http://www.panasonic.com/consumersupport7
Specifications
General
Operating environment:
5 °C – 40 °C (41 °F – 104 °F)
Handset
Frequency:
5.76 GHz – 5.84 GHz
Dimensions:
Approx. height 156 mm x width 49 mm x 
depth 35 mm (6
1/8 inches x 115/16 inches x 
13/8 inches)
Mass (Weight):
Approx. 150 g (0.33 lb.)
Power output:
200 mW (max.)
Power supply:
Ni-MH battery (2.4 V, 830 mAh)
Charger
Dimensions:
Approx. height 58 mm x width 87 mm x 
depth 95 mm (2
9/32 inches x 37/16 inches x 
33/4 inches)
Mass (Weight):
Approx. 90 g (0.20 lb.)
Power consumption:
Standby: Approx. 1.1 W
Maximum: Approx. 3.4 W
Power supply:
AC adaptor (120 V AC, 60 Hz)
Note:
LDesign and specifications are subject to 
change without notice.
LThe illustrations in these instructions 
may vary slightly from the actual 
product.
TGA570_571(e).fm  Page 7  Thursday, April 13, 2006  1:51 PM 
						

							8For assistance, please visit http://www.panasonic.com/consumersupport
FCC and other information
This equipment is hearing aid compatible as 
defined by the FCC in 47 CFR Section 
68.316.
When you hold the phone to your ear, noise 
might be heard in your Hearing Aid. Some 
Hearing Aids are not adequately shielded from 
external RF (radio frequency) energy. If noise 
occurs, use an optional headset accessory or 
the speakerphone option (if applicable) when 
using this phone. Consult with your 
audiologist or Hearing Aid manufacturer about 
the availability of Hearing Aids which provide 
adequate shielding to RF energy commonly 
emitted by digital devices.
WHEN PROGRAMMING EMERGENCY 
NUMBERS AND(OR)  MAKING TEST  CALLS 
TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to 
the dispatcher the reason for the call.
2) Perform such activities in the off-peak 
hours, such as early morning or late 
evenings.
This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following 
two conditions:
(1) This device may not cause harmful 
interference, and (2) this device must accept 
any interference received, including 
interference that may cause undesired 
operation.
Privacy of communications may not be 
ensured when using this phone.CAUTION:
Any changes or modifications not expressly 
approved by the party responsible for 
compliance could void the user’s authority to 
operate this device.
NOTE:
This equipment has been tested and found to 
comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide 
reasonable protection against harmful 
interference in a residential installation. This 
equipment generates, uses, and can radiate 
radio frequency energy and, if not installed 
and used in accordance with the instructions, 
may cause harmful interference to radio 
communications. However, there is no 
guarantee that interference will not occur in a 
particular installation. If this equipment does 
cause harmful interference to radio or 
television reception, which can be determined 
by turning the equipment off and on, the user 
is encouraged to try to correct the 
interference by one or more of the following 
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the 
equipment and receiver.
– Connect the equipment into an outlet on a 
circuit different from that to which the 
receiver is connected.
– Consult the dealer or an experienced 
radio/TV technician for help.
TGA570_571(e).fm  Page 8  Thursday, April 13, 2006  1:51 PM 
						

							For assistance, please visit http://www.panasonic.com/consumersupport9
CAUTION:
Installation
LOperating the product near 5.8 GHz 
electrical appliances may cause 
interference. Move away from the electrical 
appliances.
LThe AC adaptor is used as the main 
disconnect device. Ensure that the AC outlet 
is installed near the product and is easily 
accessible.
LTo prevent electric shock, use only the audio 
cable with the transformer included with your 
base unit when connecting the unit to an 
audio device.
Battery
To reduce the risk of fire or injury to persons, 
read and follow these instructions.
LUse only the battery(ies) specified.
LDo not dispose of the battery(ies) in a fire. 
They may explode. Check with local waste 
management codes for special disposal 
instructions.
LDo not open or mutilate the battery(ies). 
Released electrolyte is corrosive and may 
cause burns or injury to the eyes or skin. The 
electrolyte may be toxic if swallowed.
LExercise care when handling the 
battery(ies). Do not allow conductive 
materials such as rings, bracelets or keys to 
touch the battery(ies), otherwise a short 
circuit may cause the battery(ies) and/or the 
conductive material to overheat and cause 
burns.
LCharge the battery(ies) provided, or 
identified for use with the product only, in 
accordance with the instructions and 
limitations specified in this manual.
WARNING:
LTo prevent the risk of fire or electrical shock, 
do not expose the product to rain or any type 
of moisture.
LUnplug the product from power outlets if it 
emits smoke, an abnormal smell, or makes 
an unusual noise. These conditions can 
cause fire or electric shock. Confirm that 
smoke has stopped emitting and contact the 
Panasonic Call Center at 1-800-211-PANA 
(1-800-211-7262).
FCC RF Exposure Warning:
The product complies with FCC radiation 
exposure limits set forth for an uncontrolled 
environment. The handset may be carried 
and operated with only the optional specific 
belt-clip. Other non-tested belt-clips or similar 
body-worn accessories may not comply and 
must be avoided. The handset must not be 
collocated or operated in conjunction with any 
other antenna or transmitter.
Responsible party:
Panasonic Corporation of North America
One Panasonic Way, 
Secaucus, New Jersey 07094
Phone number: 1-800-211-PANA (1-800-211-
7262)
FCC Warning (KX-TGA571 only):
To ensure compliance with FCC emissions 
limits, use only the included USB cable with 
the ferrite core when connecting the unit to a 
computer.
TGA570_571(e).fm  Page 9  Thursday, April 13, 2006  1:51 PM 
						

							10For assistance, please visit http://www.panasonic.com/consumersupport
Notice
TGA570_571(e).fm  Page 10  Thursday, April 13, 2006  1:51 PM