Panasonic Ey6r220 Operating Instructions Manual

PANASONIC CONSUMER ELECTRONICS COMPANYOne Panasonic Way, Secaucus, New Jersey 07094
EY981062205 H1905 Printed in Japan

&:	

– 2 –

Lock
15min. CHARGE  EY 6220
6
2

A
B
C
D
EHexagonal bit holder
Clutch handle
Main switch
Speed selector switch
Main switch lockF
G
H
I
J
KBattery pack (EY9021)
Battery pack release button
Battery charger (EY0225)
#1 Philips bit
Slotted head bit
#2 Philips bit
A
D
E
B F
G
I
J
K
C
Parts and Controls
H

&:	

- 4 - 

3) Disconnect the plug from the power 
source and/or the battery pack from 
the power tool before making any 
adjustments, changing accessories, 
or storing power tools. 
Such preventive safety measures 
reduce the risk of starting the power tool 
accidentally.
4) 
Store idle power tools out of the reach 
of children and do not allow persons 
unfamiliar with the power tool or these 
instructions to operate the power tool.
Power tools are dangerous in the hands 
of untrained users.
5)  Maintain...

- 6 - 
16) Do not charge battery pack when the 
temperature is BELOW 0°C (32°F) or 
ABOVE 40°C (104°F). This is very impor-
tant in order to maintain optimal condition 
of the battery pack.
17)  Do not incinerate the battery pack. It 
can explode in a fire.
18)  Avoid dangerous environment. Do not 
use charger in damp or wet locations.
19)  The charger is designed to operate on 
standard household electrical power 
only. Do not attempt to use it on any 
other voltage!
20)  Do not abuse cord. Never carry...

– 8 –
EMain switch lock
After use, set the main switch lock at
the lock position to prevent acciden-
tal operation.
FBattery pack (EY9021)
CAUTION
When you charge the battery pack
for the first time, or after prolonged
storage, charge it for about 24 hours
to bring the battery up to full capacity.
1. Press the battery pack release
buttons  Gon both sides and pull
the pack away from the tool.
2. Charge the battery pack using the battery charger.
3. After the charging has been com- pleted, remove the...