Panasonic Full Hd Lcd Display Th 50lfc70 Operating Instructions

21
DIGITAL LINK status
Display the DIGITAL LINK connection environment.
Select “DIGITAL LINK status” in [Network Settings] 
menu, an
d press.
DIGITAL LINK status
LINK status
HDMI status
Signal Quality
      Minimum
      MaximumNo Link
 No HDMI
-XX dB
-YY dB
LINK status  :  Either “No link”, “DIGITAL LINK”, or “Ethernet” will be displayed.
No link  : No LAN connection, etc.
DIGITAL LINK  : Connected to the DIGITAL LINK device by LAN
Ethernet :  The PC is connected to the DIGITAL LINK terminal of this...

22
Reset
You can reset the network setting to the factory default of the Display.
Select [Reset] in [Network Settings] menu and press 1button.
Ye sNo
Reset
Network Settings
Select [Yes] and press 2.
It takes some time to restart network while the network settings are initialized.
During that time, “Network Settings” in the “Setup” menu is grayed out and cannot be set.
Extron XTP
To carry out connection settings with XTP Transmitter made by Extron. Visit the following website for details....

23
Connecting with Wired LAN
To use the network function, make the necessary settings in [Network Settings] and be sure to set LAN to enabled
in [Control I/F Select] and [DIGITAL LINK mode]. 
(See page 20)
Computer operation
Connection can be made with wired LAN. However, con rm to your system administrator on network settings 
be
fore changing any settings.
Turn on the computer.1
Make the network setting according to your system administrator.2 If the Display settings are the default settings (See...

24
Using Web Browser
  Accessing from the Web browser
Activate the Web browser in the personal computer.
1 
Enter the IP address set by the Display into the URL input  eld of the Web browser.2
Enter your “User name” and “Password”.3 
The factory default settings are user1 (user 
privileges) or admin1 (administrator privileges) for the 
user name and panasonic 
for the password.
Click [OK] to display the Display status4 page.
“Display status” page is displayed.
TH-50LFC70
Avoid activating two or more Web...

25
Using Web Browser
   
Display status page
Click [Status], then [Display status] to display the Status information page.
This page displays the Display statuses established for the items shown below.
TH-50LFC70
1 Displays the type of Display.
2 Displays the  rmware version of the Display main
unit.
3  Displays the  rmware version of the network.
3 2 
1 
Description of each item 
TH-50LFC70
1 Page tab
  Click these to switch pages.
2 Status
Click this item, and the status of the Display is 
displa...

26
Using Web Browser
Network status page
Click [Status], then [Network status] to display the Status information page.
Displays the current con guration information of the network.
1 Displays the con guration details of wireless LAN.
2 Displays the con guration details of wired LAN.
2 
1  

27
Using Web Browser
  Basic control page
To move from another page, click [Display control], then [Basic control].
1 
2 
3 
4 
1 Power On/Off control
2 Use these to select the input signals
3  Operation of AV mute
4  Switches aspect mode
The following points will be different when connected wirelessly.
Switching to Miracast™ and MEMORY VIEWER input will not be possible
.•
Control will not be possible with Crestron Connected™.•
TH-50LFC70U, TH- 65LFC70U, TH-80LFC70U,
TH-50LFC70W, TH- 65LFC70W,...

28
Using Web Browser
  Change Password page
Click [Change password].
1
2
1 Administrator
2 User
Administrator mode
1
2
3
4
567
1 Account
2 Current user name input  eld
3 Current password input  eld
4 New user name input  eld
5 New password input  eld
6 New password input  eld (re-enter for con rmation)
7 Button for executing password change
User account
1
2
34
5
1 Account
2 New user name input  eld
3 New password input  eld
4 New password input  eld (re-enter for con rmation)
5 Button for...

29
Using Web Browser
Network con g page
You can make detail network settings on Display, when connecting without the administrator authority or when 
connecting with Wireless LAN.
LAN settings
Click [Detailed set up] in the menu.1
Select the items to change and click [Next].2The settings window appears, showing the current 
settings.
To change the LAN settings, click [Change]
.•
To return to the previous window, click [Back].•
Complete the detailed settings and click3[Next].
When [Next] is clicked, the...

30
Using Web Browser
Click [Submit].4
The settings will be registered.
(Wireless LAN screen)
Making the above settings effective (Only for wireless LAN)
Select [Wireless LAN] in [Network Settings] menu of the Display, and select the network set in this page.
Important video/audio data is protected because AES encryption processing takes place.•
Changing the setting of LAN while connected with LAN might disconnect the connection.•
  Adjust clock page
Click [Detailed set up], then [Adjust clock] to...