Panasonic Hd Analog Board Av Hsb300g Operating Instructions

							
FRANÇAIS
DEUTSCH
ENGLISH
ITALIANO
ESPAÑOL
РУССКИЙ
日本語
Before operating this product, please read the instructions carefully and save this manual for 
future use.
Operating Instructions
HD Analog Board
Model No.  AV-HSB300G 
						

							
 (E)

 indicates safety information.
This  class  A  digital  apparatus  complies 
with Canadian ICES-003.
Cet  appareil  numérique  de  la  classe  A 
est  conforme  à  la  norme  NMB-003  du 
Canada.
For CANADA
Safety precautions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The  lightning  flash  with  arrowhead 
symbol,  within  an  equilateral  triangle,  is 
intended to alert the user to the presence 
of  uninsulated  “dangerous  voltage”  within 
the  product’s  enclosure  that  may  be  of 
sufficient magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within an equilateral 
triangle  is  intended  to  aler t  the  user  to 
the  presence  of  impor tant  operating  and 
maintenance  (service)  instructions  in  the 
literature accompanying the appliance.
WARNING:
•  TO   R E D U C E   T H E   R I S K   O F   F I R E   O R 
ELECTRIC  SHOCK,  DO  NOT  EXPOSE  THIS 
APPARATUS TO RAIN OR MOISTURE. 
•   THE  APPARATUS  SHALL  NOT  BE  EXPOSED 
TO  DRIPPING  OR  SPLASHING  AND  THAT 
NO  OBJECTS  FILLED  WITH  LIQUIDS,  SUCH 
AS  VASES,  SHALL  BE  PLACED  ON  THE 
APPARATUS.
CAUTION:
TO  REDUCE  THE  RISK  OF  FIRE  OR  SHOCK 
HAZARD  AND  ANNOYING  INTERFERENCE, 
USE  THE  RECOMMENDED  ACCESSORIES 
ONLY.
FCC Note:
This  equipment  has  been  tested  and  found 
to  comply  with  the  limits  for  a  class  A  digital 
device,  pursuant  to  Par t  5  of  the  FCC  Rules.  
These  limits  are  designed  to  provide  reasonable 
protection  against  har mful  interference  when 
the  equipment  is  operated  in  a  commercial 
environment.    This  equipment  generates,  uses, 
and  can  radiate  radio  frequency  energy,  and 
if  not  installed  and  used  in  accordance  with 
the  instr uction  manual,  may  cause  har mful 
interference  to  radio  communications.    Operation 
of  this  equipment  in  a  residential  area  is  likely  to 
cause harmful interference in which case the user 
will  be  required  to  correct  the  interference  at  his 
own expense.
Warning:
To   a s s u r e   c o n t i nu e d   F C C   e m i s s i o n   l i m i t 
compliance,  the  user  must  use  only  shielded 
interface cables when connecting to external units.  
Also,  any  unauthorized  changes  or  modifications 
to this equipment could void the user’s authority to 
operate it.CAUTION:
TO  REDUCE  THE  RISK  OF  FIRE  OR  SHOCK 
HAZARD,  REFER  CHANGES  OF  SWITCH 
SETTINGS  INSIDE  THE  UNIT  TO  QUALIFIED 
SERVICE PERSONNEL.
ENGLISH VERSION 
						

							
 (E)
ENGLISH

 indicates safety information.
  ) Read these instructions.
  )  Keep these instructions.
  3)  Heed all warnings.
  4)  Follow all instructions.
  5)  Do not use this apparatus near water.
  6)  Clean only with dry cloth.
  7)   Do  not  block  any  ventilation  openings.  Install 
i n   a c c o r d a n c e   w i t h   t h e   m a nu fa c t u r e r ' s 
instructions.
  8)   D o   n o t   i n s t a l l   n e a r   a ny   h e a t   s o u r c e s 
 
such  as  radiators,  heat  registers,  stoves,  or 
other  apparatus  (including  amplifiers)  that 
produce heat.
  9)   Do  not  defeat  the  safety  pur pose  of  the 
polarized  or  grounding-type  plug.  A  polarized 
plug  has  two  blades  with  one  wider  than  the 
other.  A  grounding-type  plug  has  two  blades 
and a third grounding prong. The wide blade or 
the  third  prong  are  provided  for  your  safety.  If 
the  provided  plug  does  not  fit  into  your  outlet, 
consult  an  electrician  for  replacement  of  the 
obsolete outlet.   0)  
Protect the power cord form being walked on or 
 
pinched  par ticularly  at  plugs,  convenience 
receptacles, and the point where they exit from 
the apparatus.
  )   Only use attachments/accessories specified by 
the manufacturer.
  )   Use  only  with  the  car t,  stand, 
tripod,  bracket,  or  table  specified 
by  the  manufacturer,  or  sold  with 
the  apparatus.  When  a  car t  is 
used,  use  caution  when  moving 
the  cart/apparatus  combination  to 
avoid injury from tip-over.
  3)   Unplug  this  apparatus  during  lightning  storms 
or when unused for long periods of time.
  4)   Refer  all  ser vicing  to  qualified  ser vice 
personnel.  Ser vicing  is  required  when  the 
apparatus has been damaged in any way, such 
as  power-supply  cord  or  plug  is  damaged, 
liquid  has  been  spilled  or  objects  have  fallen 
into  the  apparatus,  the  apparatus  has  been 
exposed  to  rain  or  moisture,  does  not  operate 
normally, or has been dropped.
Read  these  operating  instructions  carefully  before  using  the  unit.  Follow  the  safety  instructions  on  the 
unit  and  the  applicable  safety  instructions  listed  below.  Keep  these  operating  instructions  handy  for  future 
reference.
IMPORTANT SAFETY INSTRUCTIONS
Safety precautions 
						

							
3 (E)

Contents
Safety precautions  ....................................... 1
Introduction   ................................................... 3
Accessory   ..................................................... 3
Name of each part   ........................................ 4
Mounting   ....................................................... 4
Connections   .................................................. 7
Appearance   ................................................... 8
Specifications   ............................................... 8
Introduction
Installing this HD analog board in a multi-format live switcher AV-HS300G makes it possible to support five HD 
analog component inputs. The signal formats support HD formats (080/59.94i, 080/50i, 70/59.94p, 70/50p).
Accessory
Operating instructions   ..................  
Information on Disposal for Users of Waste Electrical & Electronic Equipment 
(private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product.Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.Please contact your local authority for further details of your nearest designated collection point.Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Safety precautions 
						

							
4 (E)
ENGLISH

Name of each part
!.!,/).0543
90B0R

90B0R

90B0R

90B0R

90B0R

1 to 5: Analog HD component input connectors [ANALOG INPUTS 1 to 5]
Mounting
Install this board in the multi-format live switcher AV-HS300G.

   Be sure to ask the store or dealer where you purchased the product for assistance with mounting and 
removal.
  Set to OFF and unplug the power connector before mounting and removal.
    Before handling the HD analog board, touch a metal part of the AV-HS300G to discharge the static 
electricity from the human body. 
An anti-static wrist strap is recommended for safety. Failures may be caused if you touch the HD analog 
board while you are still charged with static electricity.
  Keep the metal parts of the HD analog board free of contact with other metal parts.
  Be sure to mount the blank panel installed with the AV-HS300G, after removing the HD analog board.
1  Turn off the power of the AV-HS300G, and unplug the power connector.
2  Remove the 6 screws (A).
Screws (A)
AV-HS300G 
						

							
5 (E)

Mounting
3 Remove the upper panel cover.
 
Upper panel cover
4  Remove the  screws (B), and remove the blank panel.
Blank panel
Screws (B)
5  Remove the 3 screws (C) and  cable clamp.
Cable clamp
Screws (C)
6   Insert the HD analog board from the inside of the rear panel, and insert it along the guide rail for the connector. 
(Insert it securely and completely.)
HD analog board
Connector 
						

							
6 (E)
ENGLISH

Mounting
7  Install the board securely using the  screws (B) 
and 3 screws (C). 
(At this stage, install the cable clamp as well.)
Screws (B)
Screws (C)Cable clamp
8   Tighten the 6 screws (A) for the upper panel 
cover securely.
Screws (A)
9   After attaching the required cables, insert the power connector and turn the power on.
    For details on the setting and operating procedures, refer to the operating instructions of the AV-HS300G.
 
If the HD analog board has been connected properly, “ANLG” will appear at the OPT item on the 
AV-HS300G ’s SETUP/STATS menu (5/5).
 
STATS
15/15
ALM
  NO
OPT
ANLG
VER
1.00
    In order for the analog HD component signals to take effect, select “ANLG” (analog HD component) in the 
MODE item setting for each of the input channels (IN to IN5) from the AV-HS300G ’s SETUP/IN-5 menu 
(/5). Analog HD component signals and SDI signals cannot be used at the same \
time in the same input 
channel.  
Additionally, the gain of the input signals is set using the GAIN item.(The gain ca\
n be set within the 
30-step range, and the setting will result in changes of  dB. The amount by which the gain changes per 
step is not the same for each step.)
 
 SDI IN2 
 IN3 
 IN4 
 IN5 
IN1-5
 1/15 
SIG
 IN1 
MODE
ANLG
GAIN
-30—30
   -
Removal procedure
Remove the HD analog board by following the procedures for mounting it in reverse. 
						

							
7 (E)

Connections
 Make the connection with the HD analog board while the power is off.
  For details on connecting individual devices, refer to the respective operating instructions.
  For details on operating individual devices, refer to the respective operating instructions.
Connections when gen-lock is not implemented (frame synchronizer ON)
HD camera
HD camera
HD camera
VTR
PC
AC adapterAW-PS505A
DVI or VGA
SDI (HD)
SDI (HD)
SDI (HD)
HD Component
HD component monitor
HD SDI monitor
Multi-format live switcherAV-HS300G
DVD player
HD Component
HD Component
HD Component
HD component monitor
HD analog board
AV-HSB300G
HD Component 
						

							
Printed in JapanGedruckt in JapanImprimé au JaponStampato in GiapponeImpreso en JapónНапечатано в Японии
VQTB0- F0S0 
D
Matsushita Electric Industrial Co., Ltd.
Web Site: h t t p : / / p a n a s o n i c . n e t
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANYUNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICA
Headquarters:
 Panasonic Way E-, Secaucus, NJ 009   (0) -00
EASTERN ZONE: 
 Panasonic Way E-, Secaucus, NJ 009   (0) -9
WESTERN ZONE: 
0 Cahuenga Blvd. West, Los Angeles, CA 900   () -0
Government office:
(0) -
Broadcast PARTS INFORMATION & ORDERING:
9:00 a.m. – :00 p.m. (PST) (00) -/ Hr. Fax (00) -0
Emergency after hour parts orders (00) -
TECHNICAL SUPPORT:
Emergency  Hour Service (00) -0
Panasonic Canada Inc.
0 Ambler Drive, Mississauga, Ontario LW T   (90) -00
Panasonic de Mexico S.A. de C.V.
Av angel Urraza Num. 09 Col. de Valle 000 Mexico, D.F. ()  9 
Panasonic Puerto Rico Inc.
San Gabriel Industrial Park, th Infantry Ave., Km. 9., Carolina, Puerto Rico 000   () 0-00
© 00 Matsushita Electric Industrial Co., Ltd.  All rights reserved.
松下電器産業株式会社　ブロードメディア本部
〒223-8639　横浜市港北区綱島東4丁目3番1号　　 フリーダイヤル　0120－878－410
© 00 Matsushita Electric Industrial Co., Ltd.（松下電器産業株式会社）All Rights Reserved.