Panasonic Hd Plasma Display Th 58pf12 Operating Instructions
Here you can view all the pages of manual Panasonic Hd Plasma Display Th 58pf12 Operating Instructions . The Panasonic manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 21
21 MULTI PIP Selecting the Target Screen for Operations Each time this button is pressed, the target screen for operations changes. PCINPUT1PCINPUT1 Main screen Sub screen Main screen input mode Sub screen input mode Operations on the main screenOperations on the sub screen Notes: • When operations are performed for the sub screen, the sub screen audio is played. • If no operations are performed, the operation target returns to the main screen after about 5 seconds*. You can also return to main...
Page 22
INPUT MENU ENTER/ +/ VOL -/ 2 EXIT 2 1 EXIT s1 s2 s3 s4 22 VOL button Digital Zoom This displays an enlargement of the designated part of the displayed image. Select the area of the image to be enlarged. Press on the enlargement location to select. Return to normal display (quit Digital Zoom). Press to exit from the Digital Zoom. Notes: • When power goes OFF (including “Off Timer” operation), Digital Zoom terminates. • The Digital Zoom function cannot be selected while in the following...
Page 23
23 On-Screen Menu Displays Remote Control Unit 1Display the menu screen. Press to select. (Example: PICTURE menu) MENU Press several times. Each time the MENU button is pressed, the menu screen will switch. Normal Viewing PICTURE SOUND POS. /SIZE SET UP 2Select the item. Select. Select. Press.25 0 0 0 5 PICTURE NORMAL NORMALIZE STANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENTADVANCED SETTINGS MEMORY SAVE COLOR TEMPNORMAL OFF MEMORY LOAD MEMORY EDIT ( Example:...
Page 24
1/2 SIGNAL EXTENDED LIFE SETTINGS SET UP PC OFF STANDBY SAVE OFF POWER MANAGEMENTOFF AUTO POWER OFF OFF OSD LANGUAGEENGLISH ( US) COMPONENT/RGB-IN SELECT RGB INPUT LABELSCREENSAVER POWER SAVE 2/2 SET UP MULTI DISPLAY SETUP SET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATIONLANDSCAPE MULTI PIP SETUPPORTRAIT SETUP 24 (see page 28, 29) 25 0 0 0 5 PICTURE NORMAL NORMALIZE STANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENTADVANCED SETTINGS MEMORY SAVE COLOR TEMPNORMAL OFF...
Page 25
0 NORMAL NORMALIZE AUTO SETUP POS. /SIZE V-POS 0 H-POS V-SIZE DOT CLOCK H-SIZE CLOCK PHASE 1:1 PIXEL MODE OFF 0 0 0 0 0 0 0 NORMAL NORMALIZE POS. /SIZE V-POS H-POS 0 V-SIZE H-SIZE 1:1 PIXEL MODE OFF AUTO SETUP 25 Adjusting POS. /SIZE 1Press to display the POS. /SIZE menu. Press to select the menu to adjust. Press to adjust the menu. Press to exit from adjust mode. During “VIDEO (S VIDEO)”, “Digital”, “SDI” and “HDMI” input signal. During “COMPONENT”, “RGB” and “PC” input signal....
Page 26
26 H-POSAdjust the horizontal position.V-POSAdjust the vertical position. H-SIZEAdjust the horizontal size.V-SIZEAdjust the vertical size. DOT CLOCK(During “COMPONENT”, “RGB” and “PC” input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimized. CLOCK PHASE(During “COMPONENT”, “RGB” and “PC” input signal) Eliminate the fl ickering and distortion. OVER SCANTurn image over scan ON/OFF. Confi gurable...
Page 27
27 While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( / NORMALIZE Normalization) Adjusting POS. /SIZE 1:1 PIXEL MODEAdjusts the display size when 1125i, 1125p or 1250i signal is input. Notes: • Select ON when you would like to replay 1920 × 1080 input signal. • Applicable input signal; 1125 (1080) /...
Page 28
BLACK EXTENSION AGC GAMMA INPUT LEVEL ADVANCED SETTINGS NORMAL NORMALIZE W/B LOW B W/B HIGH R W/B LOW R W/B LOW G W/B HIGH G W/B HIGH B0 0 2.2 0 0 0 0 0 0OFF 25 0 0 0 5 PICTURE NORMAL NORMALIZE STANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENTADVANCED SETTINGS COLOR TEMPNORMAL OFF 28 PICTURE Adjustments 1 ADVANCED SETTINGS Enables fi ne picture adjustment at a professional level (see next page).Press to enter Advanced Settings. While the “PICTURE” menu is...
Page 29
29 PICTURE Adjustments ADVANCED SETTINGS Notes: • “COLOR” and “TINT” settings cannot be adjusted for “RGB/PC” input signal. • You can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS) for each PICTURE MENU. • The setting details for STANDARD, DYNAMIC and CINEMA respectively are memorized separately for each input terminal. • The “TINT” setting can be adjusted for NTSC signal only during “VIDEO (S VIDEO)” input signal. • In PICTURE, there is not a noticeable change...
Page 30
18 0 0 0 3 PICTURE NORMALNORMALIZECINEMA BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENTADVANCED SETTINGS MEMORY SAVE COLOR TEMPNORMAL OFF MEMORY LOAD MEMORY EDIT 25 0 0 0 5 PICTURE NORMALNORMALIZECINEMA BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENTADVANCED SETTINGS COLOR TEMPNORMAL OFF 25 0 0 0 5 PICTURE NORMALNORMALIZECINEMA BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENTADVANCED SETTINGS COLOR TEMPNORMAL...