Panasonic Hd Plasma Display Th 65phd7 Operating Instructions

							PLASMA DISPLAY
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual
for future reference.
English
TQBC0916
The illustration shown is an image.
TH-65PHD7UY
Operating Instructions
High Definition Plasma Display
Model No. 
						

							2
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with
arrow-head within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.The exclamation point within
a triangle is intended to tell
the user that important
operating and servicing
instructions are in the papers
with the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to
qualified service personnel.
2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin
grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
WARNING: To prevent damage which may result in fire or shock hazard, do not expose this apparatus to rain
or moisture.
Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set.
(including on shelves above, etc.) 
						

							3
Important Safety Instructions
  1) Read these instructions.
  2) Keep these instructions.
  3) Heed all warnings.
  4) Follow all instructions.
  5) Do not use this apparatus near water.
  6) Clean only with dry cloth.
  7) Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions.
  8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
  9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected. 
						

							4
Table of Contents Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment
from your new Plasma Display.
To obtain maximum benefit from your set, please read these Instructions before making any adjustments,
and retain them for future reference.
Retain your purchase receipt as well, and record the model number and serial number of your set in
the space provided on the rear cover of these instructions.
Important Safety Instructions ................................... 3
FCC STATEMENT ....................................................... 5
Safety Precautions ..................................................... 6
Accessories ................................................................ 8
Accessories Supplied ................................................ 8
Remote Control Batteries .......................................... 8
Connections ............................................................... 9
PC Input Terminals connection ............................... 10
SERIAL Terminals connection ................................. 11
AV & COMPONENT connection ............................. 12
RGB signal (R, G, B, HD, VD) ................................ 12
Power ON / OFF ........................................................ 13
Basic Controls .......................................................... 14
On-Screen Menu Displays ....................................... 16
Initial selections ....................................................... 18
Selecting the input signal ........................................ 18
Selecting the On-Screen Menu Language .............. 18
ASPECT Controls ..................................................... 19
Adjusting PICTURE POSITION / SIZE ..................... 20
MULTI PIP .................................................................. 21
PICTURE Adjustments ............................................. 22
ADVANCED SETTINGS ......................................... 23
SOUND Adjustment ................................................. 24
MUTE ...................................................................... 24
Digital Zoom ............................................................. 25PRESENT TIME SETUP / SET UP TIMER ............... 26
PRESENT TIME SETUP ......................................... 26
SET UP TIMER ....................................................... 27
SCREENSAVER (For preventing after-images) ..... 28
Setup of SCREENSAVER Time .............................. 29
Reduces screen after-image ................................... 29
SIDE BAR ADJUST ................................................ 30
Reduces power consumption ................................. 31
Customizing the Input labels ................................... 31
SET UP for MULTI DISPLAY .................................... 32
How to setup MULTI DISPLAY ................................ 32
How to set the Display location number
          for each Plasma Display ............................... 33
SET UP for Input Signals ......................................... 34
COMPONENT / RGB IN SELECT .......................... 34
3D Y/C FILTER ....................................................... 34
COLOR SYSTEM / Panasonic AUTO ..................... 35
3:2  PULLDOWN / VIDEO NR ................................ 35
SYNC ...................................................................... 36
H-FREQ. (kHz) / V-FREQ. (Hz) ............................... 36
Shipping condition ................................................... 37
Troubleshooting ....................................................... 38
Maintenance ............................................................. 39
VIDEO/COMPONENT/RGB/PC input signals ......... 40
Specifications ........................................................... 41 
						

							5
FCC STATEMENT
Note:
Do not allow a still picture to be displayed for an extended period, as this can cause permanent after-image
to remain on the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in
4:3 mode.
Trademark Credits
• VGA is a trademark of International Business Machines Corporation.
• Macintosh is a registered trademark of Apple Computer, USA.
• S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.
CANADIAN NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution:
To assure continued compliance and possible undesirable interference, the provided ferrite cores must be used when
connecting this plasma display to video equipment; and maintain at least 40 cm spacing to other peripheral devices.
Refer to instructions on page 10 and 11. Any changes or modifications not expressly approved by Matsushita Electric
Corporation of America could cause harmful interference and would void the users authority to operate this device.
FCC Declaration of Conformity
Model No. TH-65PHD7UY
Responsible Party: Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Electronics Company
1-888-843-9788
email: [email protected] 
						

							6
Safety Precautions
WARNING
 Setup
Do not place the Plasma Display on sloped or unstable surfaces.
•The Plasma Display may fall off or tip over.
Do not place any objects on top of the Plasma Display.
•If water spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result in fire
or electric shock. If any foreign objects get inside the Plasma Display, please consult an Authorized Service Center.
Do not cover the ventilation holes.
•Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display.
If using the pedestal (optional accessory), leave a space of 3 
15/16” (10 cm) or more at the top, left and right, 2 3/8”
(6 cm) or more at the bottom, and 2 
3/4” (7 cm) or more at the rear. If using some other setting-up method, leave a
space of 3 
15/16” (10 cm) or more at the top, bottom, left and right, and 2 61/64” (7.5 cm) or more at the rear.
Avoid installing this product near electronic equipment that easily receives electromagnetic waves.
•It may cause interference in image, sound, etc. In particular, keep video equipment away from this product.
 AC Power Supply Cord
The Plasma Display is designed to operate on 120 V AC, 50/60 Hz.
Securely insert the power cord plug as far as it will go.
•If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket
plate is loose, they should not be used.
Do not handle the power cord plug with wet hands.
•Doing so may cause electric shocks.
Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not
the cable.
•Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the
power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the
cable is suspected, have it repaired at an Authorized Service Center.
If the Plasma Display will not be used for a long period of time, unplug the power cord from the wall outlet.
 If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma
Display, unplug the power cord immediately.
•Continuous use of the Display under these conditions might cause fire or permanent damage to the unit. Have the
Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized personnel are strongly
discouraged due to its high voltage dangerous nature.
If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet
becomes damaged, disconnect the power cord plug immediately.
•A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made. 
						

							7
 CAUTION
This Plasma Display is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)
• Speakers ···································································· TY-SP65P7W-K
• Pedestal ····································································· TY-ST65-K
• Wall-hanging bracket (vertical) ·································· TY-WK65PV7
• BNC Component Video Terminal Board ···················· TY-42TM6A
• BNC Composite Video Terminal Board ······················ TY-42TM6B
• RCA Component Video Terminal Board ···················· TY-42TM6Z
• RCA Composite Video Terminal Board ······················ TY-42TM6V
• RGB (Digital) Terminal Board ···································· TY-42TM6D
• RGB Active Through Terminal Board ························· TY-42TM6G
• PC Input Terminal Board ············································ TY-42TM6P
• Composite / Component Video Terminal Board ········· TY-42TM6Y
• SDI Terminal Board ···················································· TY-FB7SD
• HD-SDI Terminal Board ············································· TY-FB7HD
• HDMI Terminal Board ················································ TY-FB7HM
• Wireless Presentation Board ····································· TY-FB7WPU
Always be sure to ask a qualified technician to carry out set-up.
 When using the Plasma Display
Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display.
•Top of the Plasma Display is usually very hot due to the high temperature of exhaust air being released through the
ventilation holes. Burns or personal injuries can happen if any body parts are brought too close. Placing any object
near the top of the display could also result in heat damages to the object as well as to the Display if its ventilation holes
are blocked.
Be sure to disconnect all cables before moving the Plasma Display.
•Moving the Display with its cables attached might damage the cables which, in turn, can cause fire or electric shock.
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.
•Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it from becoming dusty.
•Built-up dust on the power cord plug can increase humidity which might damage the insulation and cause fire. Unplug
the cord from the wall outlet and clean it with a dry cloth.
This Plasma Display radiates infrared rays, therefore it may affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or reflected light from your Plasma Display.
Note:
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on
the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.
Safety Precautions 
						

							8
Requires two AA batteries.
1. Turn the transmitter face down.
Press and slide off the battery
cover.2. Install the batteries as shown in the
battery compartment.
   (Polarity + or – must match the
markings in the compartment.)
Two “AA” size
Helpful Hint:
For frequent remote control users, replace old batteries with
Alkaline batteries for longer life.
 
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Disposal of batteries should be in an environment-friendly manner.
Observe the following precautions:
1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when the remote control acts sporadically or stops operating the Plasma Display.3. Replace the cover and slide in
reverse until the lock snaps.
PLASMA DISPLAY
INPUT
SURROUND
VOL
NR
PICTURE
SOUNDSET UP
ASPECT PICTURE
POS. /SIZE
OFF TIMER
PC
MULTI
PIPSWAP SELECTZOOM
MOVE
Accessories
Accessories Supplied
Check that you have the Accessories and items shown
Operating
InstructionsRemote Control
Transmitter
EUR646529Warranty
AC cordFixing band × 2 Batteries for the Remote
Control Transmitter
(AA Battery × 2)Ferrite core
(Small size) × 1Ferrite core
(Large size) × 2
Remote Control Batteries 
						

							9
SERIALPC    IN
AUDIO
SLOT1 SLOT2SLOT3
VIDEO INVIDEO OUTPR/CR/R PB/CB/BY/GAUDIORLCOMPONENT/RGB INAUDIO
INRLAVS VIDEO IN
12
13
2
1
2
1
2
Connections
SPEAKER
Terminal (R)SPEAKER
Terminal (L)
– Cable fixing bands   Secure any excess cables with bands as required. When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker’s Installation Manual for details on speaker installation.
Pass the attached cable
fixing band through the
clip as shown in the
figure.To secure cables connected to Terminals, wrap the cable fixing band around them
then pass the pointed end through the locking block, as shown in the figure.
While ensuring there is sufficient slack in cables to minimize stress (especially
in the power cord), firmly bind all cables with the supplied fixing band.
From SERIAL
Terminal on Computer
(see page 11)From EXTERNAL
monitor terminal on
Computer (see page 10)Optional Terminal
Board Insert Slot
(covered)COMPONENT/RGB IN
and Audio  IN Terminals
(see page12)AV Terminals
(see page12)
Note: At factory shipment, Terminal boards are installed in SLOT 2 and SLOT 3.– AC cord fixing
Speakers (Optional accessories)
To tighten: To loosen:
Pull
Pull
Keep the knob
pressed.
Note: The power plug in the illustration may not be the type fitted to your set.Push until the hook clicks.
2. Pull off.
1. Keep the knob pressed.
1Connect the AC cord plug to the Plasma Display.
2Fix the left side clamper.
3Fix the right side clamper.
Close
Open 
						

							10
PC Input Terminals connection
Notes:
• Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical
scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
• The display resolution is a maximum of 1,024 × 768 dots when the aspect mode is set to “NORMAL”, and 1,366 × 768
dots when the aspect mode is set to “FULL”. If the display resolution exceeds these maximums, it may not be possible to
show fine detail with sufficient clarity.
• The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible, you will
need to make setting changes to the computer at the time of connection.
• Some PC models cannot be connected to the set.
• There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.
• The computer shown in the illustration is for example purposes only.
• Additional equipment and cables shown are not supplied with this set.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified
frequency range.
• Component Input is possible with the pin 1,2,3 of the D-sub 15P Connector.
R  -  STANDBY
G       POWER ONINPUT MENUENTER
+VOL
AUDIO
PC IN
COMPUTER
Conversion adapter 
(if necessary)
RGBD-sub 15p
Stereo plug PC cable
Connect a cable which matches
the audio output terminal on the computer.
Less than
3 15/16(10 cm)Ferrite core (small size)
(supplied)Ferrite core (large size)
(supplied)
Audio
Less than
3 15/16(10 cm)
Installing the ferrite core (Small size)
Pull back the tabs
(in two places)Open
Press the cable
through and close 1
2
3
Installing the ferrite core (Large size)
Pull back the tabs
(in two places)Open
Press the cable
through and close 1
2
3
1 678
39
45
1015 14 13 12 11
2
Signal Names for D-sub 15P Connector
Pin Layout for PC Input Terminal
Pin No.
1
2
3
4
5
Pin No.
6
7
8
9
10
Pin No.
11
12
13
14
15
Signal Name
R (PR/CR)
G(Y)
B(PB/CB)
GND (Ground)
GND (Ground)
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Signal Name
GND (Ground)
SDA
HD/SYNC
VD
SCL
Connections