Panasonic High Speed Color Scanner Kvs1025c Operating Instructions

Model No.     KV-S1025C
KV-S1020C
These instructions contain information on operating the scanner. Before reading these 
instructions, please read the Installation Guide enclosed with this unit.
Keep the CD-ROM in the protective case. Do not expose the CD-ROM to direct sunlight or 
extreme heat, and do not scratch or smudge the surface of the CD-ROM. 

2 Thank you for purchasing a Panasonic High Speed Color Scanner.
•Panasonic supports your imaging needs with a reliable and easy to use document scanner.
•Panasonic has developed Panasonic Image Enhancement Technology to improve the quality of your scanned 
images even beyond the quality of your original document. 
As an ENERGY STAR
® Partner, Panasonic has determined that this product meets the ENERGY 
STAR guidelines for energy efficiency.
•Microsoft and Windows are either registered trademarks or...

3
Notice  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4
For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5
Component Identification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   9
Setting up the Scanner  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   10
•Setting and removing the feed tray  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   10
•Setting...

4
Notice
Federal Communications Commission Requirements
                                                   (For United States only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with...

5
For Your Safety
To prevent severe injury and loss of life, read this section carefully before using the unit to ensure proper and safe 
operation of your unit.
„This section explains the graphic symbols used in this manual
Power
Denotes a potential hazard that could result in serious injury or death.
Denotes hazards that could result in minor injury or damage to the unit.
 These symbols are used to alert operators to a specific operating procedure 
that must not be performed.
These symbols are used to...

For Your Safety
6
Operation Safeguards
Power
Never touch the plug or AC adaptor with wet hands.
Danger of electric shock exists.
Stop operation immediately if the unit emits smoke, excessive heat, abnormal smell, or unusual 
noise. These conditions can cause fire or electric shock. Immediately turn the unit off, and unplug 
the power cord, and contact your dealer for service.
When disconnecting the unit, grasp the plug instead of the cord. Pulling on a cord forcibly can 
damage it, and cause fire or...

For Your Safety
7
Installation Relocation
Operating Safeguards
Do not position the unit in a location where it is unstable.
To prevent fire or shock hazard, do not expose this unit to rain or any type of moisture.
Do not place the unit in a hot humid or dusty environment.
Prolonged exposure to these adverse conditions may cause fire or electric shock.
When moving the unit, be sure to unplug the power cord from the AC outlet. If the unit is moved 
with the power cord attached, it can cause damage to the...

For Your Safety
8
•Do not place the scanner in direct sunlight, in a cold draft, or near heating apparatus.
•Do not place the scanner near apparatus which generate electronic or magnetic noise.
•Protect the scanner from static electricity.
•Do not move the scanner immediately from a cold place to a warm place. It may cause dew.
•Handle a CD-ROM carefully. 
•Prevent a CD-ROM from damage, and keep clean.
Caution Labels
Precautions
HOT SURFACE
DO NOT TOUCH.
The glass in the scanning section become very...

9
Component Identification
LED (Green)
LED (Red)
Start/Stop 
button
Exit tray
Exit tray extension
ADF door
Feed tray extension
Feed tray
Document guides
Door open button
Stand
Security slot
Scanning lamp(s)
The scanning lamp(s) periodically lights up in sleep 
mode. This is not an unusual event. 
For details on sleep mode, refer to the User Utility 
Reference Manual.
Connects the scanner unit to 
the host computer.
Open this door if a 
paper jam occurs.
ADF door
USB port
AC adaptor
Power cord Power...

10
Setting up the Scanner
„Setting and removing the feed tray
Before using the scanner, follow the steps below to set the feed tray.
1Adjust the document guides to the 
width of A5 paper ( ), and insert the 
feed tray into the scanner ( ) as 
shown in the illustration.
2Push the right ( ) and left ( ) 
sides of the feed tray in that order until 
the feed tray locks in place.
When removing the feed tray, lift it up 
to unlock, and then pull the left ( ) 
and right ( ) sides out of the 
scanner in that...