Panasonic Home Network System Access Keypad Kx Hnk101 Operating Instructions

Operating Instructions
Home Network System
Access Keypad
Model No.    KX-HNK101 Thank you for purchasing a Panasonic product.
This document explains how to operate the access keypad properly.
For details about how to use the system, refer to the User’s Guide
(page 15). Please read this document before using the unit and save it for future
reference.
For assistance, please contact us at 1-800-272-7033 or visit our Web
site: http://shop.panasonic.com/support
 for customers in the U.S.A.Please register your...

Introduction
Accessory information 
...............3
Important Information
About this system ......................4
For your safety ...........................
4
Important safety instructions ......5
For best performance ................5
Other information .......................6
Setup
Part names and functions  ..........7
Touchpanel buttons  ...................7
LED indicator  .............................8
Setup overview  ..........................8
Registering the keypad  ..............8
Confirming...

Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
A AC adaptor/PNLV226KZ 1
B Mounting bracket * 1
1
C Wall mounting screws (25 mm (1 inch))/XTB4+25AVW 2
D Wall anchors/PNHR2264Z 2*1 The mounting bracket is attached to the product at the time of shipment.
A B C D
Other information
R
D

esign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product. Trademarks
R
i

Phone and iPad are...

About this system
R
T
his system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
R The system’s wireless features are
subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure....

Operating safeguards
R
U
nplug the product from power
outlets before cleaning. Do not use
liquid or aerosol cleaners.
R Do not disassemble the product.
R Never put metal objects inside the
product. If metal objects enter the
product, turn off the circuit breaker
and contact an authorized service
center. Medical
R
C

onsult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. DECT...

R
If the reception for a hub location is
not satisfactory, move the hub to
another location for better reception. Environment
R
K

eep the product away from
electrical noise generating devices,
such as fluorescent lamps and
motors.
R The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
R The product should not be exposed
to direct sunlight.
R Do not place heavy objects on top of
the product.
R When you leave the product unused
for a long period of time, unplug the...

Part names and
f
unctions M N
U

sed when registering the keypad
to the hub. Volume
U

sed to adjust the volume of the
sounds emitted by the keypad. Speaker
Touchpanel
W

hen no buttons are displayed
here, touch this area to display the
buttons. Touchpanel buttons
LED indicator
DC jack Touchpanel buttons
T

hese buttons allow you to confirm and
change the system’s arm mode. During
normal operation, the button that
corresponds to the current arm mode is
lit by default, and all other buttons are
dimmed....

LED indicator
Y
ou can use the LED indicator to
confirm the keypad’s status. Indicator Status
Off Normal operation, or n
o power
Red,
b
 linking
slowly Keypad is not
r
egistered to a hub.
Red,
b
 linking Keypad is out of range
o
f the hub.
Red,
b
 linking
quickly Alarm system was
t
riggered.
Green,
b
 linking
slowly Registration mode
( You pressed and held
M N
) Setup overview
1
I

nitial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide...

Using the app
W
hen you register the keypad by using
the  [Home Network]  app, you can
assign a name to your devices and
group them by location. For more
information, refer to the User’s Guide
(page 15). Confirming the
u

sage area Wireless communication
r

ange
The wireless communication range of
each device in the system from the hub
is approximately 50 m (160 feet)
indoors and approximately 300 m
(1,000 feet) outdoors. Wireless
communication may be unreliable
when the following obstacles are
located...

Installation
T
o mount the keypad flat against the wall, use the mounting bracket.
Note:
R Mount the keypad on the stable location where the keypad can be adequately
supported when mounting.
R Do not mount keypad on a soft material. It may fall down, break, or cause injury.
R Do not mount the keypad on a plywood surface that is less than 25.4 mm
(1 inch) thick.
R The pull-out strength of the installation area must be at least 29.4 N (3 kgf). Determining the installation location
N

ote:
R Make sure there...