Home > Panasonic > Wireless Network > Panasonic Home Network System Backup Battery Kx Hnp100 Installation Guide

Panasonic Home Network System Backup Battery Kx Hnp100 Installation Guide

Here you can view all the pages of manual Panasonic Home Network System Backup Battery Kx Hnp100 Installation Guide . The Panasonic manuals for Wireless Network are available online for free. You can easily download all the documents as PDF.

Page 11

Setup overview
1
I
nitial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2 Insert the battery
The battery will supply power to
the connected device in the event
of a power outage.
3 Connections
Connect the backup battery to the
power outlet and to the device it
will supply power to.
4 Registration
Register each of your backup
batteries to the hub if you want to
receive notifications in the event of
a power outage....

Page 12

Connections
Hub Indoor Camera Outdoor Camera Indoor Siren
Insert the backup battery’s DC plug firmly into the device’s DC jack, DC cable
p
lug, or DC extension cord.
Insert the DC plug completely. (This example illustration applies to the
KX-HNB600 and KX-HNC200.) Connect the AC adaptor plug to the backup battery.
Secure the AC adaptor cord by wrapping it around the hook.
Connect the AC adaptor to the power outlet.
N

ote:
R The AC adaptor described in these instructions is the AC adaptor that was...

Page 13

Note about power connections
AC adaptor connection
R
T
he AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
R The AC adaptor should be connected to a vertically oriented or floor-mounted
AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
For a
ssistance, please visit http://shop.panasonic.com/support 13 Setup
HNP100_(en_en)_0703_ver.101.pdf   132015/07/03   12:23:15 

Page 14

Registering the
b
ackup battery
This procedure is not required for
d
 evices that were included as part of
a bundle. Register each of your backup batteries
t

o the hub if you want to receive
notifications in the event of a power
outage.
You can register each device by using
the registration buttons or the  [Home
Network]  app.Using registration buttons
1
H

ub:
Press and hold  M  OTHER
D

EVICE N until the LED indicator
blinks slowly in green.
2 Backup battery:
Press and hold  M N
 
until the
LED...

Page 15

Features available
w
hen using the
[Home Network] app
Some of the features that are available
when using the  [Home Network]  app
are listed below. For more information,
refer to the User’s Guide.
– Device management
You can use the app to change the
backup battery’s name.
– Notifications
The  [Home Network]  app can
receive notifications in the event of a
power outage and when power has
been restored. You can also use the
app to configure the hub to call a
pre-programmed phone number and
notify you of...

Page 16

Specifications
R
S
tandards
DECT (Digital Enhanced Cordless
Telecommunications)
R Frequency range
DECT: 1.92 GHz – 1.93 GHz
R RF transmission power
DECT: 115 mW (max.)
R Power source
120 V AC, 60 Hz
Lithium Ion (Li-Ion) type battery (1  ´
3.7 V, 1,450 mAh)
R Operating conditions
5 °C – 40 °C (41 °F – 104 °F)
R Dimensions (height  ´ width  ´
depth)
Approx. 115 mm  ´ 71 mm  ´ 25 mm
(4 17/32 inches  ´ 2 13/16 inches  ´
1 inch)
R Mass (weight)
Approx. 123  g (0.27 lb)
16 For a
ssistance, please visit...

Page 17

FCC and other
i
nformation
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Privacy of communications may not be
ensured when using this device.
CAUTION:
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to...

Page 18

Customer services
18
For assistance, please visit http://shop.panasonic.com/support Appendix
HNP100_(en_en)_0703_ver.101.pdf   182015/07/03   12:23:15You may also contact us directly at: 1-800-272-7033,Monday - Friday 9 am to 9 pm;  
Saturday - Sunday 10 am to 7 pm, EST. Accessories!
http://shop.panasonic.com/support
Customer Services Directory Shop
for all your Panasonic gear
Go to 
Get everything you need to get the most out of your Panasonic products 
Accessories & Parts for your Camera, Phone, A/V...

Page 19

Limited Warranty (ONLY FOR U.S.A.)
For assistance, please visit http://shop.panasonic.com/support
19Appendix
HNP100_(en_en)_0703_ver.101.pdf   192015/07/03   12:23:15Limited Warranty Coverage (For USA Only)LaborOne (1) Year
Parts
One (1) Year
To submit a new repair request and for quick repair status visit o ur Web Site at
http://shop.panasonic.com/support
Panasonic Products Limited Warranty
Online Repair Request
Mail-In Service--
Online Repair Request
If your product does not work properly because of a...

Page 20

20
For assistance, please visit http://shop.panasonic.com/support Appendix
HNP100_(en_en)_0703_ver.101.pdf   202015/07/03   12:23:15Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from t he servicer, 
loss of or damage to media or images, data or other memory or recorde d content. 
The items listed are not exclusive, but for illustration only. )This warranty ONLY COVERS failures due to defects in materials or w orkmanship, 
and DOES NOT COVER normal...
Start reading Panasonic Home Network System Backup Battery Kx Hnp100 Installation Guide

Related Manuals for Panasonic Home Network System Backup Battery Kx Hnp100 Installation Guide

All Panasonic manuals