Home > Panasonic > Wireless Network > Panasonic Home Network System Motion Sensor Kx Hns102 Installation Guide

Panasonic Home Network System Motion Sensor Kx Hns102 Installation Guide

Here you can view all the pages of manual Panasonic Home Network System Motion Sensor Kx Hns102 Installation Guide . The Panasonic manuals for Wireless Network are available online for free. You can easily download all the documents as PDF.

Page 11

Confirming the
usage area
Wireless communication
range
The wireless communication range of
each device in the system from the hub
is approximately 50 m (160 feet)
indoors and approximately 300 m
(1,000 feet) outdoors. Wireless
communication may be unreliable
when the following obstacles are
located between the hub and other
devices.
R Metal doors or screens
R Walls containing aluminum-sheet
insulation
R Walls made of concrete or
corrugated iron
R Double-pane glass windows
R Multiple walls
R When using...

Page 12

Wall mounting
There are two methods for wall
mounting the motion sensor. To mount
the sensor flat against the wall, use the
rear cover. To mount the sensor so that
it faces 45° to the left or right, use the
wall mounting adaptor.
Mounting examples *1
 of the rear
cover and wall mounting adaptor
A  Rear coverB Wall mounting
adaptor
*1 View of looking from above.
Note:
R Mount the motion sensor on the
stable location where the motion
sensor can be adequately supported
when mounting.
R Do not mount motion...

Page 13

3Attach the motion sensor to the
rear cover.
R Insert the grooves on the
motion sensor to the 4 tabs on
the rear cover, and then push
down the motion sensor.
Using the wall mounting adaptor
1 Remove the rear cover by
pressing the upper sides of the
cover ( A) and then sliding it down
( B ).
2 Attach the wall mounting adaptor
to the wall by using screws ().
R Place the wall mounting
adaptor with “ UP” mark facing
upwards.
R
 21 mm (27/32 inches)
3 Attach the motion sensor to the
wall mounting adaptor.
R...

Page 14

Testing the motion
sensor
You can observe the motion sensor’s
LED indicator and test the performance
of the motion sensor.
1 Press  M
N.
2 Move to an area near the motion
sensor.
3 While moving near the motion
sensor, observe the LED indicator.
R When motion is detected, the
LED indicator lights in red.
4 Note the areas where movement
is detected.
5 Press  M
N again.
Adjusting the sensor
sensitivity
You can use the  MHIGH N/M LOW N switch
(page 7) to adjust the sensor’s
sensitivity. If the sensor often...

Page 15

Note:
R You can also access the User’s
Guide at the web page listed below.
www.panasonic.net/pcc/support/tel/
homenetwork/manual/
Specifications
R Frequency range
DECT: 1.92 GHz – 1.93 GHz
R RF transmission power
DECT: 115 mW (max.)
R Power source
AA (LR6) Alkaline battery (2  ´ 1.5 V)
R Operating conditions
0 °C – 40 °C (32 °F – 104 °F)
R Sensor detection method
Pyroelectric infrared sensor (heat
sensor)
R Heat sensor detection range
Horizontal: approx. ±45°
Vertical: approx. ±10°
Distance: approx. 5 m...

Page 16

FCC and other
information
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
Privacy of communications may not be
ensured when using this phone.
CAUTION:
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to...

Page 17

Notice:
R FCC ID can be found inside the
battery compartment.For assistance, please visit www.panasonic.com/support17
Appendix 

Page 18

Customer services
18For assistance, please visit www.panasonic.com/support
AppendixCustomer Services Directory (United States and 
Puerto Rico)
www.panasonic.com/support
or, contact us via the web at: 
www.panasonic.com/contactinfo
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
www.pstc.panasonic.com
or, send your request by E-mail to:
[email protected]
Accessory Purchases (United States and 
Puerto Rico)
Obtain Product...

Page 19

Warranty (For  United  States  and  Puerto  Rico)
For assistance, please visit www.panasonic.com/support19
AppendixLimited Warranty Coverage
Labor
One (1) Year Parts
One (1) Year
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
www.panasonic.com/repair
PROOF OF PURCHASE.
Panasonic Home Network System Products
Limited Warranty
Mail-In Service--Online If your product does not work properly because of a defect in materials or workmanship, 
Panasonic...

Page 20

20For assistance, please visit www.panasonic.com/support
AppendixLimited Warranty Limits And ExclusionsThis Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, bug infestation, mishandling, misapplication,...
Start reading Panasonic Home Network System Motion Sensor Kx Hns102 Installation Guide

Related Manuals for Panasonic Home Network System Motion Sensor Kx Hns102 Installation Guide

All Panasonic manuals