Panasonic Home Theater Audio System Sc Zt1 Operating Instructions

							Operating Instructions
Home Theater Audio System
Model No. SC-ZT1
RQT9471-YH0409RT0
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions caref\
ully.
Before connecting, operating or adjusting this product, please read the \
instructions completely.
Please keep this manual for future reference.
PP
For U.S.A. and Puerto Rico only
The warranty can be found on page 30.
For Canada only
The warranty can be found on page 31.
If you have any questions contact
In the U.S.A. and Puerto Rico:  1-800-211-PANA(7262)
In Canada:  1-800-561-5505
As an ENERGY STAR
® Partner , 
Panasonic has determined that this 
product meets the ENERGY STAR
® 
guidelines for energy efficiency.
Ú For Canada only: The word “Participant” is used in place of 
the word “Partner”. 
EnCf
„ SC-ZT1 Components
Main unit (control box part)
SU-ZT1
Speakers SB-ZT1
5%
						

							RQT9471
2
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A 
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER 
CONFINED SPACE. ENSURE THE UNIT IS WELL 
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK 
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE 
THAT CURTAINS AND ANY OTHER MATERIALS DO 
NOT  OBSTRUCT THE VENTILATION VENTS.
The lightning fl ash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user 
to the presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of 
suffi  cient magnitude to constitute a risk of electric 
shock to persons.
The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR 
PRODUCT DAMAGE,
*
  DO NOT EXPOSE THIS APPARATUS TO RAIN, 
MOISTURE, DRIPPING OR SPLASHING AND THAT NO 
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, 
SHALL BE PLACED ON THE APPARATUS.
*
 USE ONLY THE RECOMMENDED ACCESSORIES.
*
  DO NOT REMOVE THE COVER (OR BACK); THERE 
ARE NO USER SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The socket outlet shall be installed near the equipment and easily 
accessible.
The mains plug of the power supply cord shall remain readily 
operable.
To completely disconnect this apparatus from the AC Mains, 
disconnect the power supply cord plug from AC receptacle.
CAUTION!
Do not place anything on top of this unit or block the heat radiation 
vents in any way. In particular, do not place DVD recorder or CD/
DVD players on this unit as heat radiated from it can damage your 
software.
CAUTION
CAUTION:   TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1) Read these instructions.
2) K

eep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7)  Do not block any ventilation openings. Install in accordance  with the manufacturer’s instructions.
8)  Do not install near any heat sources such as radiators, heat  registers, stoves, or other apparatus (including amplifi  ers) 
that produce heat.
9)  Do not defeat the safety purpose of the polarized or  grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding-type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided 
plug does not fi  t into your outlet, consult an electrician for 
replacement of the obsolete outlet. 10)  Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus.
11)  Only use attachments/accessories specifi  ed by the 
manufacturer.
12)  Use only with the cart, stand, tripod,  bracket, or table specifi  ed by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination to 
avoid injury from tip-over.
13)  Unplug this apparatus during lightning storms or when  unused for long periods of time.
14)  Refer all servicing to qualifi  ed service personnel. Servicing 
is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable 
safety instructions listed below. Keep these operating instructions handy for future reference.
IMPORTANT SAFETY INSTRUCTIONS
Caution
•  Use the speakers only with the recommended 
system. Failure to do so can damage the 
amplifier and speakers, and can cause fire. 
Consult a qualified service person if damage 
occurs or if a sudden change in performance 
is apparent.
•  Do not attach these speakers to walls or  ceilings.
5%
						

							RQT9471
3
Before use
Table of contents
Setting up your Home 
Theater system .............................. 4
Supplied accessories .................... 5Control guide ................................. 5
Remote control preparation ......... 7
Connection
Installation ....................... 8
Wireless functions ........................................... 8
Home Theater 
connections .................... 9
Basic connections .......................... 9
Connecting equipment with HDMI 
terminal (TV, DVD recorder, etc.) .................... 9
Connecting STB etc. ..................................... 10
Setting for automatically switching the input source to STB ..... 10
Connecting cables to audio terminals (DVD player, etc.) .... 10
Connecting equipment without 
HDMI terminal 
(DVD player, VCR, etc.) ................. 11
Other connections ........................ 12
To connect a second set of equipment that supports HDMI .......12
To connect audio equipment (CD player, etc.) ..... 12
To connect a subwoofer (not included) ......... 12
AC power supply connection ..... 12
Speaker setting ............. 13
Setting the speakers ..................... 13
Checking the speaker setting ...... 14
Setting front speakers only .......... 15
Changing the number of speakers to 2. ........ 15
Product Service ........................... 29
Listening caution ......................... 29
Limited Warranty
 (ONLY FOR U.S.A. 
AND PUERTO RICO) .................... 30
Limited Warranty
 (ONLY FOR CANADA) ................. 31
Troubleshooting 
and other 
information
Error messages ........................... 25
Using with headphones .............. 25
Specifi  cations .............................. 25
Troubleshooting guide ................ 26
Digital signals that can be 
played on this system ................. 27
Maintenance ................................. 27
Glossary ....................................... 28
Play
Adjusting sound quality ................................. 21
Adjusting the volume balance of front speakers ...21
Setting distances ........................................... 22
Setting 7.1-channel virtual surround ............. 22
Reducing standby power consumption 
(In standby condition (HDMI off mode)) ........ 22
VIERA Link “HDAVI Control” setting .............. 23
Adjusting the time lag between audio and 
video by delaying audio output ...................... 23
Switching between dual sounds .................... 23
Clear audio at low volume ............................. 23
Switching the attenuator ............................... 23
Switching the input signal detection setting ...... 24
Reset (factory settings) ................................. 24
When other equipment (mini component system, 
AV amp, etc.) manufactured by Panasonic operates 
with the remote control operations of this system
 .... 24
Enjoying movies and music .... 16
Enjoying sound fi  eld effects ............ 17
Surround playback ............................................. 17
SFC (Sound Field Control) ................................ 17
Dolby Pro Logic   .............................................. 17
Canceling sound fi eld effects ............................. 17
When using only front speakers ........................ 17 Dolby Virtual Speaker ................................... 17
SFC (Sound Field Control) ............................ 17
Using the VIERA Link 
“HDAVI Control™” ....................... 18
What you can do with VIERA Link “HDAVI Control” .. 18
Functions and settings ............... 20
Using “WHISPER-MODE SURROUND” ....... 20
Using “GAME” ............................................... 20
Muting ........................................................... 20
Adjusting the bass (woofer part) output ........ 20
Adjusting the surround speaker output ......... 20
Adjusting the surround speaker output 
using the test signal ...................................... 21
Setup menu items ......................................... 21
Before use
Troubleshooting and other information
Connection
Play
5%
						

							RQT9471
4
Installing the speakers (➜  page 8)
Step
1
You can make your preferred setting because speaker 
cords are not required.
•  Make sure to place the speakers on a flat, stable surface so there is no 
danger of them falling over.
•  AC power supply cord (included) is necessary for each speaker.
Connecting the television and DVD recorder ( ➜  page 9)
(Peripheral equipment and cables are not included unless otherwise mentioned.)
Step
2
Enjoying movies and music (
➜  page 16)
Enjoy surround sound with DVDs, TV, and other 
sources.
•  Audio is transmitted wirelessly.
:*í
Setting the speakers (
➜  page 13)
Use the remote control for speaker setting.
•  Make sure to make the speaker setting when using for the first time after 
purchase.
Step
3
Step
4
Before use
Setting up your Home Theater system
Setting up your Home Theater system
„ Connecting TV
Necessary cable:
(For images and audio) 
HDMI cable: 1 (not included)
(For audio) Optical fi  ber cable: 1 (not included)
„
 Connecting recorder
Necessary cable:
(For images and audio) 
HDMI cable: 1 (not included)
•  Only with HDMI cable connection, you cannot enjoy TV sounds on this system. Connect TV and the main unit  using the optical fiber cable (or stereo connection cable) to enjoy TV sound on this system.
•  Connect with an HDMI cable for high-quality audio and video.
•  This connection requires HDMI terminals on both the television and the DVD recorder. I need 2 HDMI 
cables and 1 
optical fi
 ber cable 
for connections.
Install and connect the main unit and other equipment.
5%
						

							RQT9471
5
Supplied accessories/Control guide
Before use
Keep the Leg cushion out of reach of children to prevent swallowing.
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for replacement parts.
(Product numbers correct as of April 2009. These may be subject to change.)
Only for U.S.A. and Puerto Rico:  To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” on page 30.
Only for Canada:  To order accessories, call the dealer from whom you have made your purchase.
Supplied accessories
Main unit (Control box)
Control guide

Front view
Display
PCMWDIGITAL  DTS
PL         SFC
    MIXVS
DIGITAL  INPUTft
Digital surround signal/Sound fi
 eld 
( ➜  below, page 17) When input signal is digital
When PCM signal is being input 
or the input signal setting is fi
 xed 
to PCM ( ➜ page 24)
General display When the input signal setting is fi
 xed to DTS 
( ➜  page 24)
Wireless Link display
(Displayed when wireless speakers are properly operating.) 
(
➜  page 14)
When the sound fi eld effect is off 
by pressing [–SETUP, OFF] ( ➜ page 17) 
or when using headphones ( ➜ page 25)
Standby/on 
switch
(
➜  pages 13, 16) For adjusting volume 
(
➜  page 16)
[INPUT SELECTOR] 
switch ( ➜ page 16)
For connecting 
headphones ( ➜ page 25)
 DIGITAL  :  Dolby Digital sources
DTS : DTS sources
 VS  :  When Dolby Virtual Speaker is working
SFC  :  When SFC mode is being used
 PL    :  When Dolby Pro Logic   decoder is being  used (When using Dolby Virtual Speaker 
for 2-channel stereo source)
•  When taking out speakers, hold the pole and base parts 
(➜ page 6).
Packing plan
Speakers Remote control
Batteries
Main unit
AC power 
supply cords
5 AC power supply cords
(K2CB2CB00021)
2 Batteries
(R6, AA)
1 Remote control 
(N2QAYB000417)Leg cushions (2 sheets: 16 pieces)
(RFA3045)
Unit of distance: ft (feet), 1 feet=0.3 meter (
➜ page 22) 
5%
						

							RQT9471
6
Speaker (with built-in amplifi er)
AC IN 
:*TEST ID
Pole 
(mid-high part)
Base 
(woofer part) AC inlet 
(
➜  page 12) TEST 
terminal
[WIRELESS LINK] 
indicator 
(
➜  page 13)
ID switch
For switching the speaker 
“ON/OFF” (
➜ page 13)
Front view
Side view
Note
TEST terminal: This is used to check the product operation status. Only used in factory. Do not insert a foreign object.
ID switch: This is used to check the product operation status and not used regularly.
Control guide
Before use
Control guide
Note
The audio output terminals can be used when you do not use the wireless function and play back on other speakers via an external 
amplifi  er. Use commercially available monaural audio cables (monaural mini plug/pin plug) to connect to audio input terminals of an 
external amplifi  er channel by channel.
Rear view
AC inlet (
➜ page 12) Subwoofer output 
terminal (
➜ page 12) Digital input terminal (
➜ pages 9 to 11, 19)
HDMI terminal ( ➜ pages 9,  10, 12, 19)
Audio input terminal 
(
➜  pages 9 to 12)
Audio output terminal  
(
➜  below)
5%
						

							RQT9471
7
Remote control
Standby/on button (➜ page 16) Input mode and remote control code 
buttons (
➜ pages 16, 24)
For adjusting speaker output
(➜ pages 20, 21)
Test signal output (
➜ pages 14, 21)
For adjusting the volume (➜ page 16)
For using “WHISPER-MODE SURROUND” 
(➜  page 20)
Muting (➜ page 20)
For returning to the previous menu 
( ➜  pages 10, 15, 21 to 24)
For using “GAME” (
➜ page 20)
For entering setup mode 
( ➜  pages 10, 15, 21 to 24) For adjusting/activating settings 
(
➜  pages 10, 15, 21 to 24)
For selecting or canceling  Dolby Virtual Speaker, 
Dolby Pro Logic 
 and SFC mode   (➜  page 17)
Remote control preparation
Inserting the batteries
(R6/LR6, AA)
Press on the tab to open.
Insert so the poles ( ( and 
)) match those in the 
remote control.
Use manganese batteries or alkaline batteries. •  Do not mix old and new batteries.
•  Do not use different types of batteries at the same time.
•  Do not take apart or short circuit.
•  Do not attempt to recharge alkaline or manganese batteries.
•  Do not use batteries if the covering has been peeled off.
•  Do not heat or expose to fl
 ame.
•  Do not leave the batteries in an automobile exposed to direct  sunlight for a long period of time with doors and windows 
closed.
Mishandling of batteries can cause electrolyte leakage which 
can severely damage the remote control. 
Remove the batteries if the remote control is not going to be 
used for a long period of time. Store them in a cool, dark place.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by 
the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Control guide/Remote control preparation
Before use
Note
For remote control buttons used for speaker 
setting, see pages 13 to 15.
Remote control signal sensorMain unit
Using the remote control
•  Do not place an object between the signal sensor and  the remote control.
•  Do not expose the signal sensor to the direct sunlight or  the strong light of a fl  uorescent lamp.
•  Keep the transmission window and the system’s sensor  free from dust.
Within 7 meters 
(23 feet) at the front 
(The remote controlling 
range varies according 
to the angle)
Transmission 
window
Note
Approx.30ºApprox.30º
5%
						

							RQT9471
8
Installation
Wireless functions
As this system uses a frequency band of 2.4 GHz, the radio waves may be interrupted by an obstacle. Depending on the 
surrounding environment (i.e. radio wave interruption from outside, etc.) or the building structure where this system is used (i.e. wall 
that easily refl  ects radio waves, etc.), sounds may be cut or noise may occur.
Install this system properly paying attention to the following descriptions.
„  Equipment certifi
 cation
As this system received Technical Conditions compliance certifi  cation based on the Radio Law, the wireless station license is not 
required. However, if you do the following actions to this system, you may be punished by law.
•  Disassemble or refurbish
„  Restrictions for use
•  Domestic use only.
•  Use this system in the same room.
„ Do not place an obstacle between the main unit and speakers.
Radio waves from this system reach maximum range of 15 m (49 feet) in the same room. If there is an obstacle between the main 
unit and speakers or the main unit is placed at the height of 50 cm (1.6 feet) or below from the fl
 oor, the radio waves reach smaller 
range.
„  Keep this system away from equipment that generates radio wave interference.
If the following equipment is located near the system, install this system away from such equipment.
•  Bluetooth, OA devices, telephone, etc.: approx. 3 m (10 feet) or more.
•  Microwave oven, wireless LAN compatible devices: approx. 3 m (10 feet) or more.
This system is designed to automatically avoid radio wave interference w\
ith such household equipment. If radio wave 
interference occurs, the Wireless Link display (
➜  page 14) may blink, the sounds from speakers may be interrupted or nois\
e may 
occur.
These phenomena occur when this system selects a proper frequency. These are not malfunctions.
„  Keep this system away from metal objects that tend to refl
 ect radio waves.
If there are metal objects or furniture in the room where this system is installed, radio waves tend to be refl  ected. Depending on the 
listening-viewing position, sounds may be interrupted or noise may occur.  These symptoms may be remedied by slightly moving this 
system’s position.
Note that radio waves tend to be refl  ected also when this system is installed in rooms with a lot of activity\
.
„ There is no positional distinction for each speaker 
before setting.
„  Make sure to place the speakers on a fl
 at, stable 
surface so there is no danger of them falling over.
„  When carrying speakers, hold the pole and base 
parts (
➜ page 6).
„  The speakers of this system are not magnetically 
shielded.
  Do not install this system near a CRT-based  television.
Note
• 
Make sure the base parts are not covered by cloth such as a curtain.
• Before attaching the leg cushion (Included) on the base parts to 
prevent tilt or rattle on the floor, make sure there are no people in 
the surrounding area.
•  If the main unit is placed at the height of 50 cm (1.6 feet) or  below from the fl  oor, the radio waves reach smaller range.
•  Do not install other equipment directly on or under the main  unit.
•  Set the distance from each speaker to the listening-viewing  position. (➜ page 22)
Setup example
•  Aim the front face (with Panasonic logo) of each  speaker at the listening-viewing position for setting.
Front speaker 
(right)
Front speaker 
(left)
Connected equipment Main unit
Surround 
speaker (left)
Approx.120°
Surround 
speaker (right)
Installation
Connection
5%
						

							RQT9471
9
Main unit
HDMI
input TV
HDMI
Video/Audio  out
„ HDMI cable notes
•  It is recommended that you use Panasonic’s HDMI cables.
•  Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
•  When outputting 1080p signal, please use the HDMI cables 5.0 meters (16.4 feet) or less.
„ Enjoying only with TV speaker
•  When image equipment such as TV and Blu-ray Disc player/DVD recorder, etc. is connected to HDMI terminal (➜ above, page 12) 
of this system, images/audio signals from the Blu-ray Disc player/DVD recorder, etc. go through this system and are transmitted to 
TV even if this system is turned off using the power button of this system. (Standby through function) This is convenient to enjoy 
only with TV speaker.
•  Images recorded with x.v.Color or Deep Color (➜ page 28) are also supported.
Note
When you turn this system off using the power button of this system, the audio/video signals from equipment connected t\
o HDMI 
input are output through the television, even if you have set input on this system to anything other than HDMI input (“BD/DVD ” or 
“AUX 1 ”) before turning off this system. (The selector returns to the previous setting when you turn this system on again.)
When equipment is connected to both BD/DVD IN terminal and AUX1 terminal, images/audio signals of equipment whose input is 
lastly selected are output.
Connecting the optical 
fi  ber cable
Insert the cable 
so its shape fi  ts 
correctly into 
the terminal. Do not bend!
Digital audio 
out (optical)
Blu-ray Disc player/
DVD recorder, etc.
Audio out
R    L
If connection 
A is not possible, make connection 
B. When both are 
already connected, connection  A takes priority over connection 
B.
Home Theater connections
•  Turn off all equipment before making any connections.
•  To connect equipment, refer to the appropriate operating 
instructions.
Home Theater connections
Connection
Basic connections
Connecting equipment with HDMI terminal (TV, DVD recorder, etc.)
HDMI cable (not included)Stereo connection cable 
(not included)Optical fi  ber cable  (not included)
Connection cable
Make sure to connect 
to  TV OUT  .
5%
						

							RQT9471
10
Home Theater  connections
Home Theater connections
Connection
Basic connections
Connecting STB etc.
Use this connection to enjoy STB multi-channel sources on this system.
Main unitHDMI input
TV
HDMI Video/ Audio out
Digital audio out (optical)
Blu-ray Disc player/
DVD recorder, etc.
Make sure to connect 
to  TV OUT  .
Digital audio 
out (optical)
STB etc.
Setting for automatically switching the input source to STB
When you make the above connection and you use Panasonic TV (VIERA), you can automatically switch this system’s input by 
switching the input source of TV (VIERA) to STB in the following procedure.
Preparation: Make sure that this system has been turned on. (
➜ page 16)
1.  Switch the input source of TV (VIERA) with the above connection 
and show STB pictures.
2.  Press and hold [–SETUP, OFF] for about 2 seconds.
The setting items are displayed. (➜ page 21)
3. Press [ w][
q ] to select “STB AUDIO ” and press [OK].
4. Press [ e][
r ] to select “SET ” and press [OK].
SET : The setting is automatically switched to “AUX2 / STB ”.
OFF : The setting is not automatically switched to “AUX2 / STB ”. (factory setting)
5. Press [ 
RETURN] several times to select “EXIT ” and press [OK] 
to fi  nish the setting.
A
:  Connect the video cable directly from the other equipment to the television. 
B:  Use this connection so audio from the equipment can be heard through the\
 television’s speakers even if this system is in standby mode.
Reduce the volume on the television and select “TV ” after you have made connections as above if you want to use this system.
Connecting cables to audio terminals (DVD player, etc.)
TV Audio out
Video cable (
A)
Audio cable (
B)
VIDEO IN
AUDIO IN
VIDEO OUT
AUDIO OUT
L
R Main unit
DVD player 
etc.
Note
• “STB AUDIO ” in step 3 is displayed only when the unit is connected to the Panasonic TV (VIERA).
  Also, this is not displayed when the step 1 operation is not performed.
•  If you change the connection after setting, select OFF once and SET again.
•  When you select “EXIT ” and press [OK], the setting mode finishes in step 3.
HDMI IN
HDMI OUT
To return to the previous display/To 
cancel during setting operation in 
steps 2 to 5: Press [
  RETURN].
HDMI cable
•  Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.
5%