Panasonic Indoor Pan Tilt Head Aw Ph405n Operating Instructions

Before operating this product, please read the instructions carefully and save this manual for future use.
Operating Instructions
Indoor Pan-tilt Head
Model No.  AW-PH405N
Printed in JapanF0107Y0 D VQTB0150 



 indicates safety information.
This  class  A  digital  apparatus  complies  with 
Canadian ICES-003.
Cet  appareil  numérique  de  la  classe  A  est 
conforme à la norme NMB-003 du Canada.
For CANADA
Safety precautions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.
The  lightning  flash  with  arrowhead  symbol, 
within  an  equilateral...



 indicates safety information.
 1)  Read these instructions.
  )  Keep these instructions.
  )  Heed all warnings.
  4)  Follow all instructions.
  5)  Do not use this apparatus near water.
  6)  Clean only with dry cloth.
  7)   Do  not  block  any  ventilation  openings.  Install  in 
accordance with the manufacturer’s instructions.
  8)   D o   n o t   i n s t a l l   n e a r   a n y   h e a t   s o u r c e s 
 
such  as  radiators,  heat  registers,  stoves,  or  other 
apparatus...

4

Contents
Safety precautions  ........................................................................\
........................................................................ 2
Operating precautions   ........................................................................\
.................................................................. 5
Introduction   ........................................................................\...

5

Operating precautions
 Handle the unit carefully.
    Dropping the unit or subjecting it to strong impact may 
give rise to malfunctioning or accidents.
  Turn off the power before connecting or 
disconnecting the cables.
    Be absolutely sure to turn off the power before connecting 
or disconnecting the cables.
  Install the unit near the main power outlet, and 
position it in such a way that its power plug can 
be plugged into and unplugged from the outlet 
easily.
  Do not use the unit...

6

Accessories
Operating instructions  ..................................................... 1
Rotary arm ........................................................................\
. 1
Camera mounting base   .................................................... 1
Mounting screws for the rotary arm and camera 
mounting base  
    (with flat washers, spring washers)
  M5
22 mm   ............................................................. 7
Camera cable...

7

Parts and their function 

8

 Rotary head
This rotates in the horizontal direction.
  Pedestal
  POWER ON/OFF switch
Where a switch is pushed in, the unit’s power is turned 
on, and the unit’s power is turned off after the switch has 
jumped out.
  AC inlet [AC IN] (AC 3-point inlet)
Connect the accessory AC power cable to this inlet.
  Camera mounting base mounting screws
M5  mm hexagon socket head screws (with flat 
washers, spring washers) ( of each provided as 
accessories)
These parts are used to secure...

9

Parts and their function
Rotary head connector panel
 ND/EXT connector [ND/EXT]
This is for the control of the ND filter and lens extender of 
the motorized lens unit.
Connect this connector when using a motorized lens 
unit with ND filter and lens extender functions. The cable 
described in “Cable specifications” on page 6 is required 
in order to connect this connector.
CVCC (12 V)CanonEXT ()
CGND
EXT Return
CanonEXT ()
ND Signal
EXT SignalND Return
(Pin layout as seen from cable end)
The...

10

Parts and their function
Pedestal connector panel
 CONTROL IN RP connector [RP]
This is the connector for the control of signals of the 
camera and pan-tilt head.
It is connected to the TO PAN/TILT HEAD connector on 
the AW-RP655 multi-function controller and AW-RP555 
multi hybrid control panel.
Use a 10BASE-T (equivalent to UTP category 5) straight 
cable for the connecting cable.
  COM connector [COM]
This is the connector for the control signals used to 
extend the camera’s functions.
  VIDEO...