Home > Panasonic > Camera Lens > Panasonic Interchangeable Lens For Digital Camera H-fs045200 Operating Instructions

Panasonic Interchangeable Lens For Digital Camera H-fs045200 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Interchangeable Lens For Digital Camera H-fs045200 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Operating Instructions
    INTERCHANGEABLE LENS FOR DIGITAL CAMERA
    Model No.
    H-FS045200
    Before connecting, operating or adjusting this 
    product, please read the instructions completely.
    For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfoFor Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or 
                                        send e-mail to: [email protected]ç
    PP
    VQT1U88
    until 
    2008/10/1
    VQT1U88_ENG_Cover.fm  1 ページ  2008年8月29日 金曜日 午後1時33分 
    						
    							2VQT1U88ContentsInformation for Your Safety ..................................... 2Precautions ........................................................... 5
    Supplied Accessories ............................................. 6
    Attaching/Detaching the Lens ................................. 6
    Names and Functions of Components ................... 8
    Cautions for Use ..................................................... 9 Troubleshooting .................................................. 10
    Specifications........................................................ 11
    Limited Warranty................................................... 12-If you see this symbol-
    THE FOLLOWING APPLIES ONLY IN CANADA.Information for Your SafetyKeep the unit as far away as possible from 
    electromagnetic equipment (such as microwave 
    ovens, TVs, video games, radio transmitters, 
    high-voltage lines etc.).
    ≥ Do not use the camera near cell phones because 
    doing so may result in noise adversely affecting 
    the pictures and sound.
    ≥If the camera is adversely affected by electromagnetic 
    equipment and stops functioning properly, turn the 
    camera off and remove the battery and/or the 
    connected AC adaptor. Then reinsert the battery and/
    or reconnect the AC adaptor and turn the camera on.The lens can be used with a digital camera 
    compatible with the lens mount standard for the 
    “Micro Four Thirds System”.
    ≥It cannot be mounted on the 
    Fo ur  Th ird s
    TM mount 
    specification camera.
    Information on Disposal in other Countries 
    outside the European Union
    This symbol is only valid in the 
    European Union.If you wish to discard this 
    product, please contact your 
    local authorities or dealer and 
    ask for the correct method of 
    disposal.
    This Class B digital apparatus complies with 
    Canadian ICES-003.
    VQT1U88_ENG_SPA.book  2 ページ  2008年8月27日 水曜日 午前10時20分 
    						
    							3
    VQT1U88
    ≥The digital camera illustrations in these operating 
    instructions show DMC-G1 as an example.
    ≥ The appearance and specifications of products 
    described in this manual may differ from the actual 
    products you have purchased due to later 
    enhancements.
    ≥ Four Thirds
    TM is a trademark.
    ≥ Micro Four Thirds is a trademark.
    ≥ Other names, company names, and product 
    names printed in these instructions are 
    trademarks or registered trademarks of the 
    companies concerned.
    ENGLISH
    VQT1U88_ENG_SPA.book  3 ページ  2008年8月27日 水曜日 午前10時20分 
    						
    							4VQT1U88THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
    the FCC Rules.
    These limits are designed to provide reasonable protection against harmful interference in a residential installation. 
    This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance 
    with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 
    interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
    television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 
    correct the interference by one or more of the following measures:●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.●Consult the dealer or an experienced radio/TV technician for help.
    Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 
    device may not cause harmful interference, and (2) this device must accept any interference received, including 
    interference that may cause undesired operation.
    Responsible Party:
    Panasonic Corporation of North America
    One Panasonic Way
    Secaucus, NJ 07094
    Support Contact:
    Panasonic Consumer Electronics Company
    Telephone No.: 1-800-211-PANA (7262) 
    VQT1U88_ENG_SPA.book  4 ページ  2008年8月27日 水曜日 午前10時20分 
    						
    							5
    VQT1U88
    ∫Lens Care≥Sand and dust can damage the lens. Make 
    sure that no sand or dust gets inside the lens 
    or the terminals when using the lens on a 
    beach, etc.
    ≥ This lens is not waterproof. If drops of water 
    get onto the lens, wipe the lens with a dry 
    cloth.
    ≥ Do not press the lens with excessive force.
    ≥ When there is dirt (water, oil, and fingerprints, etc.) 
    on the surface of the lens, the picture may be 
    affected. Lightly wipe the surface of the lens with a 
    soft, dry cloth before and after taking pictures.
    ≥ Do not place the lens mount facing downwards. 
    Do not allow the lens contact point  1 to become 
    dirty.
    ∫ About Condensation (Fogging of the 
    Lens)≥Condensation occurs when there are differences 
    in temperature and humidity as described below. 
    Condensation can cause the lens to become dirty 
    and lead to mold and malfunctioning, so exercise 
    caution in the following situations:
    – When the camera is brought indoors from outside 
    during cold weather
    – When the camera is brought into an air- conditioned car
    – When cold air from an air conditioner is directly  blown onto the lens
    – In humid places
    ≥ Put the camera into a plastic bag to allow it to 
    acclimate to the surrounding temperature in order 
    to prevent condensation. If condensation occurs, 
    turn the power off and leave it for about two hours. 
    Once the camera acclimates to the surrounding 
    temperature the condensation will go away 
    naturally.
    PrecautionsVQT1U88_ENG_SPA.book  5 ページ  2008年8月27日 水曜日 午前10時20分 
    						
    							6VQT1U88Supplied Accessories[Inspection to be performed when you unpack 
    the unit]
    When removing the unit from its packing box, check 
    that the main unit and the supplied accessories are 
    there and also check their external appearance and 
    functions to verify that they have not sustained any 
    damage during distribution and transportation.
    If you discover any trouble, contact your vendor 
    before using the product.1
    Lens Storage Bag
    2
    Lens Hood
    3
    Lens Cap
    4
    Lens Rear Cap
    (The lens cap and lens rear cap are attached to 
    the interchangeable lens at the time of 
    purchase.)
    Attaching/Detaching the Lens≥Refer also to the camera’s operating instructions 
    for attaching and detaching the lens.∫ Attaching the Lens≥Check that the camera is turned off.1 Turn the lens rear 
    cap to detach it.A: Lens Rear Cap2 Align the lens fitting marks
     B  (red marks)
     on 
    the camera body and the 
    lens and then rotate the 
    lens in the direction of 
    the arrow until it clicks.
    • Do not press the lens release 
    button when you attach a lens.
    • Do not try to attach the lens when holding it at an 
    angle to the camera body as the lens mount may 
    get scratched.
    • Check that the lens is attached correctly.
    VFC4358 VYC0986
    VYF3201 VFC43153
    12 4
    
     
    
    
    
    VQT1U88_ENG_Body.fm  6 ページ  2008年8月28日 木曜日 午前10時49分 
    						
    							7
    VQT1U88
    ∫Detaching the Lens≥Check that the camera is turned off.Press the lens release 
    button  C while turning 
    the lens as far as 
    possible in the direction 
    of the arrow to detach it.• Attach the lens rear cap so 
    that the lens contact point does not get 
    scratched.
    • Attach the body cap to the camera so no dirt or 
    dust will get inside the main unit.∫ Attaching and Detaching the Lens Cap≥Be careful not to lose 
    the lens cap.
    ∫ Attaching the Lens Hood 
    (Supplied Accessory)Insert the lens hood into the lens, and 
    turn in the direction of the arrow until it 
    stops.D: Fit to the mark∫Temporarily Storing the Lens Hood1 Turn the lens hood in the direction of the 
    arrow to detach it.
    
    VQT1U88_ENG_Body.fm  7 ページ  2008年8月28日 木曜日 午前10時49分 
    						
    							8VQT1U882Reverse the lens hood and then attach it 
    in the same way as shown previously.• When taking pictures with 
    the flash with the lens hood 
    attached, the lower portion 
    of the screen may turn dark 
    (vignetting effect) and the 
    control of the flash may be 
    disabled because the photo 
    flash may be obscured by the lens hood. We 
    recommend detaching the lens hood.
    • When using the AF assist lamp in the dark, 
    detach the lens hood.∫ Attaching Filters≥Edges of pictures may be cut off if more than one 
    PL filter (optional) or MC protector (optional) is 
    used or if thick filters and/or protectors are used.
    Names and Functions of Components∫ Lens
    1 Lens surface
    2 Focus ringRotate to focus when taking pictures with manual 
    focus.
    234 56
    1
    VQT1U88_ENG_Body.fm  8 ページ  2008年8月28日 木曜日 午後6時18分 
    						
    							9
    VQT1U88
    3[O.I.S.] switchWhen the lens is attached to the camera the 
    stabilizer function is set to activate if the [O.I.S.] 
    switch is set to [ON].
    ≥We recommend setting the [O.I.S.] switch to [OFF] 
    when using a tripod.
    ≥ The stabilizer function may not be effective in the 
    following cases.
    – When there is a lot of jitter.
    – When the zoom magnification is high.
    – When using the digital zoom.
    – When taking pictures while following a moving  subject.
    – When the shutter speed becomes slower to take  pictures indoors or in dark places.4 Zoom ringRotate the zoom ring when you wish to take large 
    (tele) or wide (wide angle) pictures. (35 mm film 
    camera equivalent: 90 mm to 400 mm)5Contact point
    6 Lens fitting mark
    Cautions for Use∫About the LensTake care not to drop or knock the lens. Also 
    take care not to put a lot of pressure on the lens.
    ≥Take care not to drop the bag that you inserted the 
    lens in as it may damage the lens. The camera may 
    stop operating normally and pictures may no longer 
    be recorded. When using pesticides and other volatile 
    substances around the camera make sure that 
    they do not get onto the lens.
    ≥If such substances get onto the lens they can 
    damage the exterior case or cause the paint to peel.Do not carry the unit when it is still attached to 
    the camera body.
    ≥Under no circumstances should the unit be stored 
    in any of the following locations since doing so may 
    cause problems in operation or malfunctioning.– In direct sunlight or on a beach in summer
    – In locations with high temperatures and humidity 
    levels or where the changes in temperature and 
    humidity are acute
    – In locations with high concentrations of sand,  dust or dirt
    – Where there is fire
    VQT1U88_ENG_SPA.book  9 ページ  2008年8月27日 水曜日 午前10時20分 
    						
    							10VQT1U88– Near heaters, air conditioners or humidifiers
    – Where water may make the unit wet
    – Where there is vibration
    – Inside a vehicle
    ≥ Refer also to the operating instructions of the 
    digital camera.
    ≥ When the unit is not going to be used for a 
    prolonged period, mold and other problems may 
    cause performance failure. It is recommended that 
    you check the unit’s operation prior to use.
    ≥ Do not leave the lens in contact with rubber or 
    plastic products for extended periods of time.
    ≥ Do not touch the lens contact point. Doing so can 
    cause failure of the unit.
    ≥ Do not disassemble or alter the unit. If the internal 
    parts require inspection or repair, take the unit to 
    the vendor.
    Do not use benzine, thinner, alcohol or other 
    similar cleaning agents to clean the lens glass or 
    exterior cabinet.
    ≥ Using solvents can damage the lens or cause the 
    paint to peel.
    ≥ Wipe off any dust or fingerprints with a soft, dry 
    cloth.
    ≥ Use a dry, dust cloth to remove dirt and dust on 
    the zoom ring and the focus ring.
    ≥ Do not use a household detergent or a chemically 
    treated cloth. A sound is heard when the camera is turned on 
    or off.
    ≥
    This is the sound of lens or aperture movement 
    and is not a malfunction.
    Troubleshooting
    VQT1U88_ENG_Body.fm  10 ページ  2008年8月28日 木曜日 午前9時49分 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Interchangeable Lens For Digital Camera H-fs045200 Operating Instructions