Panasonic Kx Prw130 Operating Instructions Manual

Operating Instructions
Premium Design Phone with Smartphone Connect
Model No.    KX-PRW130Before initial use, see “Getting Started”
on page 9.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte  “Guía Rápida Española”, página 57.
For assistance, visit our Web site: http://www.panasonic.com/help
 for customers
in the U.S.A. or Puerto Rico. Please register your product:...

Introduction
Accessory information 
..................................3
Important Information
For your safety .............................................5
Important safety instructions ........................6
For best performance ...................................6
Other information .........................................7
Specifications  ...............................................7
Getting Started
Setting up .....................................................9
Intelligent eco mode...

Accessory information
Supplied accessories
No. Accessory item/Order number Quantity
A AC adaptor/PNLV236Z 1
B Telephone line cord/PQJA10075Z 1
C Rechargeable batteries/HHR-4DPA 2
D Handset cover * 1
/PNYNPRSA10WR 1*1 The handset cover comes attached to the handset.
A B C D
Additional/replacement accessories
P

lease contact your nearest Panasonic dealer for sales information (page 61). Accessory item Order number
Rechargeable
b
 atteries HHR-4DPA
* 1
R To order, please visit...

Expanding your phone system
Y
ou can expand your phone system by registering optional handsets (6 max.) to a single base
unit.
R Optional handsets may be a different color from that of the supplied handsets. Feature/Model no. KX-PRWA13 KX-PRWA10
Handset (optional) Audible message alert
(
 page 39) Only the base unit beeps.
Only the handset beeps.* 1*1 If you have also set the audible message alert feature using the KX-PRWA13 handset, both
t
 he KX-PRWA10 handset and the base unit beep.
R When registering...

For your safety
T
o prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product. WARNING
Power connection
R
U

se only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a...

outlet is installed near the product and is
e
asily accessible.
R This product is unable to make calls when:
– the handset batteries need recharging or
have failed.
– there is a power failure. Battery
R
W

e recommend using the batteries noted
on page 3.  USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is...

R
If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception. Environment
R
K

eep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time,...

100 mW (peak transmission power)
R E
ncryption
WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/
AES), WEP (128/64 bit)
R Simplified configuration
WPS (PBC)
R Power source
120 V AC, 60 Hz
R Power consumption
Base unit:
Standby: Approx. 1.5 W
Maximum: Approx. 3.9 W
R Operating conditions
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
8 For assistance, please visit http://www.panasonic.com/helpImportant Information
PRW130USA(en)_0311_ver110.pdf   82014/03/11   12:58:55 

Setting up
Connections
n
 
Base unit Connect the AC adaptor to the unit by
p

ressing the plug firmly. Keep the plug in the horizontal position
a

nd fasten the cord by hooking it. Connect the AC adaptor to the power
o

utlet. Connect the telephone line cord to the
u

nit, then to the single-line telephone jack
(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is
r

equired if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV236. Battery installation
R U...

Battery charging
C
harge for about 7 hours.
R Confirm  “Charging ” is displayed ( ).
R W

hen the batteries are fully charged,
“ Fully charged ” is displayed. Note when setting up
Note for connections
R
T

he AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to...