Panasonic Kx Prx120 Operating Instructions Manual

Important:
R You must store the full phone number, including the area code, in order to block calls from that
number.
1 Tap [Landline]  in the home screen or app list.
2 Tap [Landline settings]  ®  [Caller blocked] .
R The handset connects to the base unit.
3 Tap 
 ®  [Add to blocked list] .
4 Enter the desired phone number and then tap  [Done].
Adding a phone number from the base unit call log
1 Tap [Landline]  in the home screen or app list.
2 Tap [Call log list] .
R The handset connects to the base...

Phone number conversion codesIf you store phone numbers in your contacts using “+” and the country code, store the following
codes in the base unit so that phone numbers will be dialed correctly.
1 Tap [Landline]  in the home screen or app list.
2 Tap [Landline settings]  ®  [Initial settings] .
R The handset connects to the base unit.
3 Tap [Phone number conversion] .
4 Select a code to edit, enter the code (4 digits max.) and then tap  [OK].
– [International code] : This is the international dialing...

Tone/pulse settingThis setting must be set to match the dialing mode of your phone service, otherwise you will not
be able to make calls. (The default setting is  [Tone].)
1 Tap [Landline]  in the home screen or app list.
2 Tap [Landline settings]  ®  [Initial settings] .
R The handset connects to the base unit.
3 Tap [Tone/pulse setting] .
4 Select the desired setting.
– [Pulse]:  Select if your phone service uses pulse (rotary) dialing mode.
– [Tone]:  Select if your phone service uses tone dialing...

Wi-Fi settingsIf you have a wireless router and an Internet connection, you can configure the handset to
connect to your Wi-Fi network and access the Internet for synchronizing your handset with your
Google account, using the  [Browser] app to view web pages, etc.
1 From the home screen, tap 
 ®  [System settings] .
2 Turn on the  [Wi-Fi] switch.
3 Tap [Wi-Fi] .
4 Select a Wi-Fi network.
R If the desired Wi-Fi network is not displayed, you may need to enter the network name
(also called the “SSID”)...

Caller ID features
When you receive a call, Caller ID allows the base unit to receive caller information provided from
your phone service provider. The base unit automatically logs caller information for the last 50
callers and stores this information in the base unit call log. The handset also logs information for
calls that are received while the handset is connected to the base unit.
Caller information display
If a caller’s phone number matches the phone number stored in the handset contacts (page...

4Select the desired setting.
Listening to voicemail
1 Tap [Phone]  in the home screen or app list.
2 Select the 
 tab at the top of the screen.
3 Tap and hold  1.
4 Operate your service provider’s voicemail service.
R Contact your service provider for details.
46For assistance, please visit http://www.panasonic.com/help
Other Features and Settings  

Adding handsetsIn order to use a handset and base unit together, the handset must be registered to the base unit.
You can register additional handsets to the base unit for a total of 6 handsets.
Important:
R See page 4 for information about recommended handsets. Certain features may not be
available if a different handset model is used.
Registering an additional handset to your base unit
The supplied handset is pre-registered to the base unit.
1 Tap [Landline]  in the home screen or app list.
2 Tap...

Intercom features
Making an intercom callYou can call another handset that is connected to the same base unit.
1 Tap [Phone]  in the home screen or app list.
2 Tap 
 and then select the desired handset.
R You can customize the handset name (page 47).
3 When finished, tap 
 to end the call.
Answering an intercom call
1 When a call is being received, tap 
 and drag it to .
R To reject an intercom call, tap 
 and drag it to .
2 When finished, tap 
 to end the call.
Transferring and sharing a call
You can...

Note:
R You can prevent other handset users from joining your calls by disabling call sharing
(page 49).
Call sharing
If a handset user is talking on a call, this feature allows other handset users to join the call
(page 48).
1 Tap [Landline]  in the home screen or app list.
2 Tap [Landline settings]  ®  [Initial settings] .
R The handset connects to the base unit.
3 Turn the  [Call sharing]  checkbox on or off.
Using key detectors
You can register up to 4 optional key detectors to your phone system...

RThe key detector will enter registration mode automatically and will sound its registration
tones.
5 Wait until a long beep sounds.
Note:
R If the registration tones do not sound or registration fails, remove the battery from the key
detector for at least 2 minutes before attempting registration again.
Changing a key detector’s name
1 Tap [Landline]  in the home screen or app list.
2 Tap [Key detector]  ®  [Settings] .
R The handset connects to the base unit.
3 Select the desired key detector and then...