Panasonic Kx Tg2970 Operating Instructions Manual

Answering System
61For assistance, please call: 1-800-ADT-ASAP
Remote Operation from a Touch Tone Phone 
While outside, you can operate the Answering System 
from any touch tone phone. A synthesized voice menu 
will guide you through the Answering System (p. 63).
•To skip the voice menu and operate the unit directly, 
see page 64.
Summary of remote operation
•The unit will announce the remaining recording time after playback, if it is less 
than 5 minutes.
•The messages are saved.
* If the unit announces...

Remote Operation from a Touch Tone Phone
62
Remote Code 
The remote code prevents unauthorized people from accessing your unit and 
listening to your messages. Choose any 2-digit number (00–99) for your remote 
code.
The factory preset remote code is “11”. If you do not program your own remote 
code, you can use “11”. 
To check the remote code, repeat steps 1 to 5.
•The remote code is displayed. When finished, press [STOP].
1Press [FUNCTION/EDIT].
2Press [] at “Telephone”.
3Scroll to “Initial setting” by...

63
Remote Operation from a Touch Tone Phone
Answering System
For assistance, please call: 1-800-ADT-ASAP
Press [1].
Press [1].
Press [1].
Press [1]. Press [2].
Press [2].
Press [2].
Press [2].
Voice Menu
The shaded parts are voice prompts.
•3 seconds after playback, the voice menu will start again from the beginning.
•The unit will announce the remaining recording time after playback if it is less than 
5 minutes.
•If you hear “Memory full” after playback, erase unnecessary messages (p. 64).
•If you do...

Remote Operation from a Touch Tone Phone
64
Direct Remote Operation
Once you have entered the remote code (p. 62), you can also control your unit by 
direct commands instead of using the voice menu. To end the remote operation, 
hang up at anytime.
Direct commands
Turning on the Answering System
Call your unit and wait for 12 rings.
•The unit will answer and the greeting will be played.
•The Answering System will turn on. Hang up or enter the remote code for other 
options.
•When turning on the Answering...

65
Useful Information
For assistance, please call: 1-800-ADT-ASAP
Belt Clip
You can hang the cordless handset on your belt or pocket using the belt clip.
To attach the belt clip To remove the belt clip
Optional Headset
Connecting an optional headset to the cordless handset allows hands-free phone 
conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, 
KX-TCA88HA, KX-TCA91, KX-TCA92 or KX-TCA98 headset. To order, call the 
accessories telephone number on page 2.
Connecting an optional...

66
Wall Mounting
Base unit
This unit can be mounted on a wall phone plate.
1Pull down the handset hook until it locks, so 
the tab holds the handset. 
2Press the tabs in the direction of the arrows (1), then remove the wall 
mounting adaptor (
2).
3Connect the AC adaptor. Tuck the telephone line cord inside the wall 
mounting adaptor, then push it in the direction of the arrows (
1) and 
(
2). 
•The word “UP WALL” should face upward.
Wall Template for the Charger unit
11
2
To Power 
Outlet
1
22
1
2.45...

67
Wall Mounting
Useful Information
For assistance, please call: 1-800-ADT-ASAP
4Connect the telephone line cord. 
Mount the base unit, then slide 
down. 
•Raise the antennas.
Charger unit
The charger can be wall mounted. Connect the AC adaptor. Install screws 
using the wall template (p. 66). Mount the charger (
A). Slide it down (B), 
then slide down to the right (
C) until it is secured.
To temporarily set the handset down during 
a conversation, place it as shown here.
To Power 
Outlet Screws
(not...

68
Canceling Registration/Re-registration
Canceling the Handset Registration 
If you no longer need to use the cordless handset or if you want to use the cordless 
handset with a different base unit of the same model, it is necessary to cancel the 
registration from the current base unit.
Only one cordless handset can be canceled at a time.
Make sure the cordless handset and the base unit near each other and are not 
being used.
•“[-]” is shown on the top right of the display. 
•After canceling...

69
Canceling Registration/Re-registration
Useful Information
For assistance, please call: 1-800-ADT-ASAP
Re-registering the Handset 
If you want to re-register the cordless handset to the base unit or a different base 
unit of the same model, you need to register it to that base unit. The cordless 
handset will be given a new extension number of that base unit. Only one cordless 
handset can be registered at a time. 
Make sure the base unit and the other cordless handsets are not being used. 
Have both...

70
If the Following Appear on Your Display...
The following will be displayed on the base unit or the cordless handset when the 
unit needs your attention.
Display messageCause & Remedy
Recharge battery
(cordless handset only)•The battery needs to be charged. Recharge the 
battery (p. 12).
Charge for 6 HRS
(cordless handset only)•The battery has been discharged. The cordless 
handset will not work. Fully charge the battery 
(p. 12).
No link to base.
Walk closer to 
base and try 
again.
(cordless handset...