Panasonic Kx Tg403 Operating Instructions Manual

Operating Instructions
Digital Cordless Phone
Model No. KX-TG403SK
  Digital Cordless Answering System
   Model No.
KX-TG433SKR
Model shown is KX-TG403SK. Before initial use, see “Getting Started”
on page 9.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte  “Guía Rápida Española”, página 44.
For assistance, visit our Web site: http://www.panasonic.com/help
 for customers
in the U.S.A. or Puerto Rico....

Introduction
Model composition 
.......................................3
Accessory information  ..................................3
Important Information
For your safety .............................................5
Important safety instructions ........................6
For best performance ...................................6
Other information .........................................7
Specifications  ...............................................8
Getting Started
Setting up...

Model composition
Series Model No. Base unit Handset
Part No. Part No. Quantity
KX-TGC210
s eries KX-TG403SK KX-TGC210 KX-TGCA21
3
KX-TGC220
s
 eries KX-TG433SK KX-TGC220 KX-TGCA21
3Accessory information
Supplied accessories
No. Accessory item/Order number Quantity
A AC adaptor/PNLV226Z 1
B Telephone line cord/PQJA10075Z 1
C Rechargeable batteries/HHR-4DPA 6
D Handset cover *
 1
/PNYNTGCA20SR 3
E Charger/PNLC1055ZS 2*1 The handset cover comes attached to the handset.
A B C D E    
Additional/replacement...

*2 By installing this unit, you can extend the range of your phone system to include areas
w here reception was previously not available. This product can be purchased online. Please
visit our Web site: http://www.panasonic.com/RangeExtender Other information
R
D

esign and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product. Expanding your phone system
Handset (optional): KX-TGDA20
You can expand your phone system by
r...

For your safety
T
o prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product. WARNING
Power connection
R
U

se only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a...

R
This product is unable to make calls when:
– the handset batteries need recharging orhave failed.
– there is a power failure. Battery
R
W

e recommend using the batteries noted
on page 3.  USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when...

R
If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception. Environment
R
K

eep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time,...

Specifications
R
S
tandard:
DECT 6.0 (Digital Enhanced
Cordless Telecommunications 6.0)
R Frequency range:
1.92 GHz to 1.93 GHz
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit *1
:
Standby: Approx. 0.6 W
Maximum: Approx. 3.2 W
Base unit *2
:
Standby: Approx. 0.7 W
Maximum: Approx. 3.5 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
*1 KX-TG403SK
*2...

Setting up
Connections
n
 
Base unit Connect the AC adaptor to the unit by
p

ressing the plug firmly. Fasten the cord by hooking it.
Connect the AC adaptor to the power
o

utlet. Connect the telephone line cord to the
u

nit, then to the single-line telephone jack
(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is
r

equired if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226. n
 
Charger Connect the AC adaptor to the power
o
utlet. Battery...

Battery charging
C
harge for about 7 hours.
R Confirm  “Charging ” is displayed ( ).
R W

hen the batteries are fully charged,
“ Fully charged ” is displayed. Note when setting up
Note for connections
R
T

he AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to...