Panasonic Kx Tg5771 Operating Instructions Manual

							Programming
For assistance, please visit http://www.panasonic.com/help41
Programmable settings
You can customize the unit by programming the following features using the handset. To 
access the features, there are 2 methods: 
– scrolling through the display menus (page 41) 
– using the direct commands (page 46)
LMainly the direct command method is used in these operating instructions.
LTo change the base unit ringer volume and tone, see page 28.
Programming by scrolling through the display menus
1{MENU} (middle soft key)
2Press {^}, {V}, {} to select the desired menu. i {SELECT}
LIf there are sub-menu(s), press {^} or {V} to select the desired item. i {SELECT}
Example: To access the handset ringer volume setting
Press {^}, {V}, {} to select (. i {SELECT}
Then press {^} or {V} to select “Ringer volume”. i {SELECT}
3Press {^} or {V} to select the desired setting.
LThis step may vary depending on the feature being programmed.
4{SAVE} i {OFF}
TG5771_5776_5777.book  Page 41  Friday, February 23, 2007  3:52 PM 
						

							Programming
42For assistance, please visit http://www.panasonic.com/help
Monochrome display models: KX-TG5771/KX-TGA570
LWhen you find “*1” in the following table, refer to the note below. 
*1 If you program these settings using one of the handsets, you do not need to program 
the same item using another handset.
Main menuSub-menu 1Sub-menu 2Page
Answering device To play new––
To play all––
To erase all––
Settings Message alert61
Ring count
*159
Recording time
*160
Remote code
*159
Call screening
*161
Ringer setting 
(
Ringer volume––
Ringer tone Tone & Melody49
Custom ring49
Custom ring Record49
List50
Ring color––
Phonebook ––31
Set date & time Date and time
*1–25
Time adjustment
*1––
TG5771_5776_5777.book  Page 42  Friday, February 23, 2007  3:52 PM 
						

							Programming
For assistance, please visit http://www.panasonic.com/help43
Initial setting Auto Intercom–64
Talking CallerID–37
Caller ID edit––
LCD contrast––
Key tone––
Auto talk–27
Set base unit Talking CallerID
*137
VM tone detect
*162
Set tel line Set dial mode
*125
Set flash time
*1–
Set line mode
*1–
Registration HS registration67
Deregistration67
Set date & time Date and time
*125
Time adjustment
*1–
Change language–25
Handset name–51
Customer support––46
Main menuSub-menu 1Sub-menu 2Page
TG5771_5776_5777.book  Page 43  Friday, February 23, 2007  3:52 PM 
						

							Programming
44For assistance, please visit http://www.panasonic.com/help
Color display models: KX-TG5776/KX-TG5777/KX-TG5779/KX-TGA571
LWhen you find “*1” in the following table, refer to the note below. 
*1 If you program these settings using one of the handsets, you do not need to program 
the same item using another handset.
Main menuSub-menu 1Sub-menu 2Page
Answering device To play new––
To play all––
To erase all––
Settings Message alert61
Ring count
*159
Recording time
*160
Remote code
*159
Call screening
*161
Ringer setting 
(
Ringer volume––
Ringer tone Tone & Melody49
Custom ring49
Custom ring Record49
List50
Memory status53
Ring color––
Display setting Wallpaper Turn off52
Set picture52
Memory status53
Appearance––
LCD contrast––
Set date & time Date and time
*1–25
Time adjustment
*1––
TG5771_5776_5777.book  Page 44  Friday, February 23, 2007  3:52 PM 
						

							Programming
For assistance, please visit http://www.panasonic.com/help45
Initial setting Auto Intercom–64
Talking CallerID–37
Caller ID edit––
Key tone––
Auto talk–27
Set base unit Talking CallerID
*137
VM tone detect
*162
Set tel line Set dial mode
*125
Set flash time
*1–
Set line mode
*1–
Registration HS registration67
Deregistration67
Set date & time Date and time
*125
Time adjustment
*1–
Change language–25
Handset name–51
Customer support––46
Main menuSub-menu 1Sub-menu 2Page
TG5771_5776_5777.book  Page 45  Friday, February 23, 2007  3:52 PM 
						

							Programming
46For assistance, please visit http://www.panasonic.com/help
Programming using the direct commands
1{MENU} (middle soft key) i {#}
2Enter the desired feature code.
3Enter the desired setting code.
LThis step may vary depending on the feature being programmed.
4{SAVE} i {OFF}
Note:
LIn the following table, < > indicates the default setting.
LIf you make a mistake or enter the wrong code, press {OFF}, then start again from step 
1.
FeatureFeature 
codeSetting codeSystem 
setting*1Page
Auto talk
*2{2}{0}{0}{1}: On {0}: –27
Auto Intercom{2}{7}{3}{1}: On(Ringer On) 
{2}: On(Ringer Off)
{0}: –64
Call screening{3}{1}{0}{1}:  {0}: Offr61
Caller ID edit 
(Caller ID number auto 
edit){2}{1}{4}{1}:  {0}: Off–39
Change language 
(Display language){1}{1}{0}{1}: 
{2}: Español–25
Custom ring 
(Customized ringer tone 
for handset){1}{6}{6}––49
Customer support
*3{6}{8}{0}www.panasonic
.com/phonehelp––
Date and time{1}{0}{1}–r25
Deregistration{1}{3}{1}––67
Handset name{1}{0}{4}––51
HS registration 
(Handset registration) {1}{3}{0}––67
TG5771_5776_5777.book  Page 46  Friday, February 23, 2007  3:52 PM 
						

							Programming
For assistance, please visit http://www.panasonic.com/help47
Key tone*4{1}{6}{5}{1}:  {0}: Off––
LCD contrast 
(Display contrast){1}{4}{5}{1}–{6}: Level 1–6  – –
Message alert{3}{4}{0}{1}: On {0}: –61
Recording time{3}{0}{5}{1}: 1 min {2}: 2 min
{3}: 
{0}: Greeting onlyr60
Remote code{3}{0}{6}Default: 111r59
Ring count{2}{1}{1}{2}–{7}: Rings 
{0}: Toll saverr59
Ring color 
(Ringer indicator color){2}{3}{5}{1}: 
{2}: Color2 {3}: Color3
{4}: Multicolor––
Ringer tone 
(Handset){1}{6}{1}––49
Ringer volume 
(Handset){1}{6}{0}{1}–{6}: Level 1–6 
{0}: Off––
Set dial mode{1}{2}{0}{1}: Pulse {2}: r25
Set flash time
*5{1}{2}{1}{1}:  
{2}: 600 ms {3}: 400 ms 
{4}: 300 ms {5}: 250 ms 
{6}: 110 ms {7}: 100 ms 
{8}: 90 msr–
Set line mode
*6{1}{2}{2}{1}: A {2}: r–
Talking CallerID 
(Handset){1}{6}{2}{1}:  {0}: Off –37
Talking CallerID
(Base unit){*}{1}{6}
{2}{1}:  {0}: Offr37
Time adjustment
*7 
(Caller ID subscribers 
only){2}{2}{6}{1}: 
{2}: Manualr–
To erase all
(Erasing all messages){3}{2}{5}––57
FeatureFeature 
codeSetting codeSystem 
setting*1Page
TG5771_5776_5777.book  Page 47  Friday, February 23, 2007  3:52 PM 
						

							Programming
48For assistance, please visit http://www.panasonic.com/help
*1 If “System setting” column is checked, you do not need to program the same item using 
another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after lifting 
up the handset to answer a call, turn off this feature.
*3 The handset can display the Internet address where you can download operating 
instructions or get further information for this product using your computer.
*4 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing 
any keys, including confirmation tones and error tones.
*5 The flash time depends on your telephone exchange or host PBX. Consult your PBX 
supplier if necessary. The setting should stay at “700 ms” unless pressing {FLASH} 
fails to pick up the call waiting call.
*6 Generally, the line mode setting should not be adjusted. If S is not displayed or 
the IN USE indicator on the base unit does not light properly when another phone 
connected to the same line is in use, you need to change the line mode to “A”.
*7 This feature allows the unit to automatically adjust the date and time setting when caller 
information is received. To use this feature, set the date and time first.
Color display models only: KX-TG5776/KX-TG5777/KX-TG5779/KX-TGA571 
*1 If “System setting” column is checked, you do not need to program the same item using 
another handset. To play all
(All message playback){3}{2}{4}––56
To play new
(New message 
playback){3}{2}{3}––56
VM tone detect{3}{3}{2}{1}:  {0}: Offr62
FeatureFeature 
codeSetting codeSystem 
setting*1Page
Appearance 
(Display color){1}{8}{2}{1}: 
{2}: Color2 {3}: Color3
{4}: Color4 {5}: Color5––
Memory status{6}{7}{0}––52
Wallpaper{1}{8}{1}––52
FeatureFeature 
codeSetting codeSystem 
setting*1Page
TG5771_5776_5777.book  Page 48  Friday, February 23, 2007  3:52 PM 
						

							Programming
For assistance, please visit http://www.panasonic.com/help49
Customizing handset 
ringer tone and display
Handset ringer tone (for outside 
calls)
You can change the ringer tone heard 
when an outside call is received. 
LYou can record melodies for the handset 
ringer tone from an audio device (page 
49).
LColor display models only (KX-TG5776/
KX-TG5777/KX-TG5779/KX-TGA571):
You can copy melodies (in WAV file 
format using a computer) to be used for 
the handset ringer tone. Refer to the 
help section of the GIGARANGE USB 
Utility application for more information.
1{MENU} (middle soft key) i 
{#}{1}{6}{1}
2Select the desired item. i {SELECT}
3Select the desired item. i {SAVE} 
i {OFF}Note:
LIf you subscribe to a distinctive ring 
service (such as IDENTA-RING), select 
a tone (tone 1 to 3) for the handset ringer 
tone. If you select a melody, you cannot 
distinguish lines by their ringers.
LIf you select a melody for the handset 
ringer tone, the ringer continues to 
sound for several seconds if:
– the caller hangs up before you answer 
the call.
– another person answers the call using 
another phone connected to the same 
line.
LThe preset song “Demo1” in this product 
is used with the permission of © 2005 
Speed Crazy.
LThe preset song “Demo2” in this product 
is used with the permission of © 2006 
Copyrights Vision Inc.
Recording melodies from an 
audio device for ringer tones 
using the handset (“Custom 
ring”)
You can record melodies (max. 30 
seconds each) from an audio device by 
connecting the included audio cable. 
These melodies can be assigned as the 
handset ringer tone (page 49, 50) and the 
ringer ID (page 38) for phone numbers 
stored in the handset phonebook.
Important:
LIf a call is received while a melody is 
being recorded or played back, 
recording or playback stops 
automatically. Disconnect the audio 
cable from the handset to answer the 
call.
Handset
Tone & 
MelodyTones and melodies 
stored in the handset 
at the time of 
purchase.
Custom 
ringMelodies you stored in 
the handset (page 49).
2 melodies are already 
stored at the time of 
purchase.
TG5771_5776_5777.book  Page 49  Friday, February 23, 2007  3:52 PM 
						

							Programming
50For assistance, please visit http://www.panasonic.com/help
1Connect the handset to the audio 
device (such as a CD player or 
computer) using the included audio 
cable.
 
LHandset shown is KX-TGA570.
2{MENU} (middle soft key) i 
{#}{1}{6}{6}
3“Record” i {SELECT}
4Start playing the audio device.
5Press {REC.} to start recording.
6To stop recording, press {STOP}.
LTo listen to the recording, select 
“Playback”, then press {SELECT}. 
LTo re-record, select “Retry”, press 
{SELECT}, then start from step 3.
7“Save” i {SELECT}
8Enter the desired name (max. 14 
characters; page 33).
9{SAVE} i {OFF}
10Disconnect the audio cable from the 
handset.Note:
LMonochrome display models (KX-
TG5771/KX-TGA570):
The total recording time is about 90 
seconds.
LColor display models (KX-TG5776/KX-
TG5777/KX-TG5779/KX-TGA571):
The total recording time is about 7 
minutes. The recording time may 
decrease depending on the size of 
images and melodies already stored in 
the handset.
Assigning a customized ring to the 
handset
1{MENU} (middle soft key) i 
{#}{1}{6}{6}
2“List” i {SELECT}
3Select the desired item. i {MENU}
4“Set ringer tone” i {SELECT} 
i {OFF}
Changing the name of a melody
1{MENU} (middle soft key) i 
{#}{1}{6}{6}
2“List” i {SELECT}
3Select the desired item. i {MENU}
4“Rename” i {SELECT}
5Edit the name (max. 14 characters; 
page 33). i {SAVE} i {OFF}
Audio cable Audio device
Headphone  
output, line  
out, etc. 
Example:
Handset
Handset
TG5771_5776_5777.book  Page 50  Friday, February 23, 2007  3:52 PM