Panasonic KX-TG585SK Operating Instructions

Making cellular callsImportant:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding 
 on the handset is
displayed (page 14).
1 Lift the handset and dial the phone
number.
RTo correct a digit, press  MCLEAR N.
2 MCELL N
R The unit starts...

Making a call using the redial listThe last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1 ME N REDIAL
2 Mb N: Select the desired phone number.
3 M
N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 38).
Example:  If you need to dial the line access
number “9” when making outside calls with a...

Note:
RTo change the flash time, see page 46.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services,  the 2nd
caller’s information is displayed after you hear...

Call shareYou can join an existing outside call.
n While another unit is on a cellular call:
1 To join the conversation, press
MCELL N.
R You can join the conversation when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
2 Mb N: Select the corresponding cellular
phone.  a M SELECT N
n While another unit is on a landline call:
To join the conversation, press  M
N.
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2...

Answering a 2nd call
If you receive a call while talking on the phone,
the interrupt tone sounds (page 44) and the
2nd caller’s information is displayed if you
subscribe to Caller ID service (page 54).
Answering a 2nd call during a
landline call
1Press  MMENU N during a landline call.
2 Mb N:  “Hold ” a  M SELECT N
3 To answer the 2nd call:
Press  MCELL N while the 2nd call is being
received.
4 To hang up the 2nd call and return to the
1st call (landline call), press  MOFF N, then
press  M
N.
Answering...

nWhen 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.
Note:
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
Making a call using the redial list
nWhen only 1 handset is registered:
1 Lift the handset.
2 ME N REDIAL
3 Mb N: Select the desired phone number.
4 Within 1 minute, place the handset on
the base unit.
RWait until speakerphone is turned...

Making cellular callsImportant:
R The unit can be used to talk on 2 lines at
the same time (for example, 2 cellular lines,
or the landline and 1 cellular line).
R Only 2 Bluetooth devices can be used with
the unit at the same time (for example, 2
cellular lines, or the headset and 1 cellular
line).
R Before making calls, confirm that the
corresponding CELL indicator on the base
unit lights up (page 15).
1 Dial the phone number.
RTo correct a digit, press  MCLEAR N.
2 Press  MCELL 1 N or  MCELL 2 N.
3...

Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1 9 a  M PAUSE N
2 Dial the phone number.  a M Z N
Note:
R A 3.5 second pause is inserted each time
MPAUSE N is pressed.
Answering calls
1 Press  MZ N when the unit rings.
R You can also answer the cellular call
by pressing  MCELL 1 N or  MCELL 2 N.
2 Speak into the microphone.
3 When you finish talking, press  MZ N.
Adjusting the base unit ringer volume
Press  MD N or  MC N repeatedly to select the
desired...

Note:
RPlease contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press  * (TONE) before entering access
numbers which require tone dialing.
Call share
You can join an existing outside call.
To select the line that is being used for the call:
– for a cellular line press  MCELL 1 N or  MCELL
2 N.
– for the landline press  MZ N.
Note:
R A maximum of 3 parties (including 1 outside
party)...

Answering a 2nd call during a cellular
call
1Press  MHOLD N during a cellular call.
2 To answer the 2nd call:
MZ N,  MCELL 1 N, or  MCELL 2 N
3 To hang up the 2nd call and return to the
1st call (cellular call), press  MZ N, then
press  MCELL 1 N or  MCELL 2 N.
30For assistance, please visit www.panasonic.com/support
Making/Answering Calls Using the Base Unit

TGF37x(en)_1128_ver032.pdf   302014/11/28   16:08:40