Panasonic Kx Tg9581 Quick Guide

PNQW3883ZA    TT0714MG0  (E) Printed in China
Connecting the AC adaptor/corded handset
1Connect the AC adaptor to the unit by pressing the plug firmly.
2Connect the AC adaptor to the power outlet.3Fasten the AC adaptor cord by hooking it.
*1 After connecting the telephone line cord(s), fasten the telephone line cord(s) by hooking them.
4Connect the corded handset cord to the corded handset and the base unit until you hear a click.
LUse only the supplied Panasonic AC adaptor PNLV226.
1Connect the AC...

– 2 –
NTo connect to 2 single-line telephone jacks
1For Line 1: Connect the “Transparent” plug 
telephone line cord (2-wire cord) (1) to the unit, 
then to the Line 1 single-line telephone jack (RJ11C) 
(2) until you hear a click.
2For Line 2: Connect the “GREEN” plug telephone 
line cord (4-wire cord) (3) to the unit, then to the 
Line 2 single-line telephone jack (RJ11C) (4) until 
you hear a click.
Handset battery installation/Handset battery charging
Charge for about 7 hours.
Note:
LUSE ONLY...

– 3 –
Operating tips
Soft keys
By pressing a soft key, you can select the feature shown directly above it on the display. Pay attention to the 
display to see what functions the soft keys are assigned during operation.
Navigator key
Handset:
−{^}, {V}, {}: Scroll through various lists and items.
−? (Volume: {^} or {V}): Adjust the receiver or speaker volume while talking.
−{} REDIAL: View the redial list.
−{V} CID (Caller ID): View the caller list.
Base unit:
−{^}, {V}, {7}, or {8}: Scroll through...

– 4 –
Link to cell
You can connect your base unit and cellular phone using Bluetooth® wireless technology, so that you can 
make or answer cellular calls using your phone system. For more details, please visit our Web site: 
http://www.panasonic.com/link2cell
LLocate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a 
cellular call, you may hear noise. For best performance, we recommend placing the cellular phone 
between 0.6 m to 3 m (2 feet to 10 feet)...

– 5 –
Base unit: CELL indicators
Status Meaning
OnA cellular phone is connected. Ready to make/receive cellular calls.
Flashing−The cellular line is in use.
−Phonebook entries are being copied from a cellular phone.
−The base unit is searching for the paired cellular phone.
−The base unit is pairing a cellular phone.
−A cellular call is put on hold.
Flashing rapidlyA cellular call is being received.
Light off−A cellular phone is not paired to the base unit.
−A cellular phone is not connected to the base...

– 6 –
Basic operations
Making/Answering calls (Handset)
Making cellular calls1Dial the phone number. s {CELL}
LWhen only 1 cellular phone is paired, the unit starts dialing.
2When 2 or more cellular phones are paired:
{r}: Select the desired cellular phone. s {SELECT}
Making landline callsDial the phone number. s {C}/{s}
Answering calls{C}/{s}
To hang up{OFF}
To adjust the receiver or speaker 
volumePress {^} or {V} repeatedly while talking.
Making a call using the redial list1{>} REDIAL s {r}: Select...

– 7 –
Phonebook (Handset)
Adding entries1{

– 8 –
Call from Outlook® (Telephone Plug-in)
By installing the “Telephone Plug-in” software for Microsoft® Office Outlook® found on the supplied CD-
ROM and connecting the base unit and your computer with the mini USB cable, the following features are 
available:
−You can make/answer landline or cellular calls from the “Telephone Plug-in” of Microsoft Office Outlook 
through the base unit.
−Caller information is shown in a pop-up window on your computer display when a call is received.
Making calls from...

– 9 –
N For Microsoft Office Outlook 2007 users
Making a call from the 
Microsoft Outlook 2007 
contact list1Find and double click the desired contact.
2Using a landline:
Click [Call from line1] or [Call from line2] to select the desired line.
Using a cellular line:
Click [Call from cellV], and click the desired cellular line list ([Cell1]
*1 
to [Cell4]*1).
*1 After the Bluetooth device is paired, the device name is displayed.
3Click [Phone numbersV].
4Click the phone number you want to call.
Making a...

– 10 –
Answering calls from Outlook
When a call is received on “Telephone Plug-in” of Outlook, caller information is displayed on a pop-up 
window of your computer.
To answer the call from Outlook, perform the following operation depending on your selected pop-up 
window.
−“Contact list” (default): 
Using a landline:
Click [Answer to line1] or [Answer to line2] in the toolbar.
Using a cellular line:
Click [Answer to cellV] in the toolbar, and click the desired cellular line list ([Cell1]
*1 to...